• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.389-402
• /
• 2020

This study aimed to develop an educational program for improving the learning competencies of major courses for Chinese graduate students who account for more than 70% of international students in Korea. In this study, the program was developed using Caffarella and Daffron's interactive model. Due to the internationalization of education, the number of foreigners who study in Korea for degree courses has already exceeded 100,000, but the dropout rate has increased due to the maladjustment to university life. More specifically, they face difficulties in academic achievement because of a lack of understanding lecture contents, conducting research, and presenting in class. Therefore, this study surveyed the Chinese students in the graduate course to identify the difficulties and needs in their study of major courses and to reflect those needs (major knowledge, communication, assignment writing, and presentation) in program development. This study focused on developing an educational program for improving their learning competencies of major courses rather than simply improving Korean language skills or adapting to university life. The results of the study are expected to help Chinese Graduate students perform well in their major course studies and make their study abroad successful.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.6
• /
• pp.30-39
• /
• 2016

An experimental study was performed to investigate flexural performance and bond characteristics of RC beams strengthened using ductile polyethylene terephthalate(PET) with low elastic modulus. Bond tests were planned and completed following CSA S806. Test variables were fiber type and fiber amount. Also, total of 8 RC beams was tested. Major test variables of the beam tests included section ductility(${\mu}=3.4$, 7.0), fiber type(CF, GF, PET) and amount of fiber strengthening. Moment-curvature analyses of the beam sections were also performed. In bond tests, the bond stress distribution as well as the maximum bond stress increased with increasing amount of PET. In case of 10 layers of PET, the effective bond length was 60 mm with the maximum and the average bond stress of 2.33 and 2.10 MPa, respectively. RC beam test results revealed that the moment capacity of the RC beams strengthened using PET 10 and 20 layers increased over the control beam with little reduction in ductility by fiber strengthening. All beams strengthened using PET resulted in ductile flexural failure without any sign of fiber debonding or fiber rupture. It was important to include the mechanical properties of adhesive in the moment-curvature analysis of PET-strengthened beam sections.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.2
• /
• pp.227-236
• /
• 2009

The purpose of this study is to examine the acidity of beverages that are sold for children in the market and to estimate by experiment the degree of the enamel erosion of deciduous teeth that is attributed to the beverages. The pH value of children beverages among top sale list in Seoul and Gyeonggi province were measured. And 7 beverages with the pH value of 3.5 or lower were selected. The enamel erosion of deciduous teeth by the children beverages for 1, 5, 10, and 30 minutes respectively was examined. The results were as follows: 1. The acidity of most of the children beverages examined in this study was the pH level of 5.5 or lower that can cause the tooth erosion. 2. The microhardness value of the enamel of deciduous teeth was lower as exposing it to children beverages. The reduction of surface microhardness value was significant from 1 minute after the exposure, and the reduction was continuously observed until 30 minutes has passed. 3. The higher the acidity of beverages, the larger the reduction in microhardness value caused after the exposure of 30 minutes to the beverages. There was no significant relation between the acidity of beverages and the reduction rate of surface microhardness value. The other factors such as calcium, phosphorus, and fluorine or buffering of the beverages may affect the enamel erosion.

• Journal of Technologic Dentistry
• /
• v.35 no.3
• /
• pp.243-257
• /
• 2013

Purpose: This study aims to analyze the factors affecting the dropout intentions of the dental technology students of a college. Methods: The subject of this study was 76 freshmen and 74 sophomores of dental technician major in an anonymous college. Results from the questionnaire called K-vision diagnosis program were computed by means of t-test, One-Way ANOVA, and correlation analysis. Results: 1. Total points of the drop out intention came to 782.14 points. Of the five categories concerned with the drop out intention, complain in college satisfaction(50.12points) was the highest and department satisfaction(47.51points) was the lowest. Of 16 subcategories, complaining in administrative supporting system proved the highest as 50.80 points and Inquiry to Professor the lowest(45.56 points). 2. Among the general characteristic gender (p<. 01), student group (p<.01), and credit (p<.05) made a meaningful statistical difference; no statistical significance was found in grade, admission, and dwellings. 3. Of the five categories, statistical significance was shown as follows; Department satisfaction (p<.01), College satisfaction (p<.05) under gender, Department satisfaction (p<.05) in grade, Academic integration (p<.01), Department satisfaction (p<.01) in credit. No statistical meaning was found in admission and dwellings. 4. Statistical significance was found under 16 subcategories as follows: Career identification(p<.01), Academic support system(p<.01), Social activity II(p<.05) in gender area, Inquiry to professor(p<.01), Learning(p<.05), Understanding learning I(p<.05) in grade area, Learning(p<.001), Career identification(p<.001), Understanding learning I(p<.01), Understanding learning II(p<.01), Inquiry to professor (p<.01), Learning ability (p<.05), Occupation (p<.05), Social Activity II(p<.05), Administrative support system (p<.05) in student group area, Credit (p<.001), Career identification (p<.01), Understanding learning I(p<.05) in credit area; admission and dwellings was statistically meaningless. 5. Of the 5 categories academic integration (r=.766) was most relevant to the dropout intention of the subjects and followed by department satisfaction (r=.735), college satisfaction (r=.554), service acceptability (r=.373), and statistical significance was shown as p<.01. Conclusion: Considering the results of this study, we are in a pressing need for the introduction of policies and programmes aiming at preventing the dropout rates of the dental technician majors at college. In tandem with this, qualitative and viable human resource management of the dental technicians should be implemented.

• Development and Reproduction
• /
• v.11 no.1
• /
• pp.1-11
• /
• 2007

Specific endometrial preparation should occur during periimplantation period. That is a progress of serial differentiation and is absolute in implantation of embryo and successful pregnancy. Remodeling of tissues shown during embryogenesis is regulated by various factors including extracellular matrix (ECM). Marked changes during pregnancy are including embryo migration, decidual response, and differentiation of placenta in placental animals including human. These changes to successful implantation in embryo and uterus have to prepare the competence for attachment of embryo and uterus, and invasion defense of uterus. During these changes, ECM dramatically changes for maintaining the uterine and embryonic functions. The major component of most connective tissue is collagens. It is very complex and hard to explore the mechanisms for ECM modulation. Recently using high throughput methodology, PCR-select cDNA subtraction method, microarray, many candidate genes have been identified. Steroid hormones have fundamental role in implantation and maintenance of pregnancy. Dermatopontin, a regulator of collagen accumulation, is regulated spatio-temporally in the uterus by primarily progesterone through progesterone receptors at the time of implantation. Modulation of extracellular matrix is critically regulated by cascade of gene net-works which are regulated by cascade of sex steroid hormones. Pathological regulation of uterine extracellular matrix reported in diabetic patients. To know the extracellular modulation is essential to understanding implantation, feto-placental development and overcome the paths involved in female reproduction. Though ECM composed with very various components and it is complex, the present review focused on the fate of collagens during periimplantation period.

• Journal of Life Science
• /
• v.26 no.11
• /
• pp.1345-1354
• /
• 2016

Alopecia areata (AA) is a common and tissue-specific autoimmune disease of hair follicle resulting in the loss of hair on the scalp and elsewhere on the body. Hair follicles is a unique organ because it has its own immune system and hormonal milieu and has a different immune state at each hair cycle stage. The collapses of anagen-dependent hair follicle immune privilege arise autoimmune attack, inducing ectopic MHC class I expression in the hair follicle epithelium and autoantigen presentation to autoreactive CD8+T cells, which results in AA. Clinical and experimental studies have pointed that psychological stress may also influence the hair follicle immune/hormone systems and contribute to the induction of AA. The key pathogenesis of AA is associated with immune privilege guardians (including ACTH, ${\alpha}-MSH$, and $TGF-{\beta}$), natural killer group 2D-positive (NKG2D+) cells (including NK and CD8+T cells), and stress hormones (including CRH and substance P). Effective treatments for AA are still demanded. One of the future targets of treatment will be the modification of hair follicle immune privilege including stress. Recent studies have reported that JAK inhibitors and immunomodulators used in other autoimmune disease, such as psoriasis, atopic dermatitis, and rheumatoid arthritis, Tregs, platelet-rich plasma therapy, statins, and prostaglandin anaolgues are effective for AA. Here the article reviews the recent understanding in the pathogenesis associated with perifollicular endocrine/immunology and new treatments of AA.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2180-2186
• /
• 2011

To find out the protective effects of Kamdootang against accumulation of cadmium in rats, the experimental rats were divided into 2 groups. One group was administered with cadmium alone and the other group administered with cadmium mixed with Kamdootang. Each group has been orally administered with different doses of cadmium such as 1.7 ${\mu}g/g/day$, 3.4 ${\mu}g/g/day$ and 6.8 ${\mu}g/g/day$, respectively, for 1 to 8 weeks. As a results, body weight gained has a tendency to decrease more in the Kamdootang treated groups and non-treated groups than in control group. Cadmium accumulation in kidney showed a significant difference between the Kamdootang treated group and Kamdootang non-treated group. As the experiment period is longer and longer, both groups have got more significantly cadmium accumulation amounts. The kidney system was researched through histopathological observation that Multiple foci of necrosis, hemorrhagic necrosis in glomeruli and cloudy swelling of tubules in kamdootang non-treated group. but tissue lesion of kidney was showed less kamdootang treated group than Kamdootang non-treated group. As remarked above results, when dose low concentrated Cd in rat, Kamdootang was reduced accumulation of Cd. in kidney.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.91-91
• /
• 2011

폴리프로필렌(PP)은 고결정성 범용수지로서 염색성, 내열성, 촉감 등의 문제로 의류용 소재로는 부적합하여 초기에는 카펫용 섬유로서 가염형 폴리프로필렌 섬유가 상업화 되었지만 성공하지는 못하였다. 그 후, 섬유 산업도 의류용 외의 산업자재, 생활 자재 분야 등이 성장함에 따라, 폴리프로필렌 섬유의 수요가 확대되었다. 최근들어 스포츠 액티브 의류가 일반의류 트렌드로 들어오면서 기능성 섬유가 요구되고 이 분위기에 맞춰 다시 한번 폴리프로필렌 섬유의 의류화가 요구되는 시점이 되었으며 섬유중 에너지 소비량이 가장 적고, 쉽게 재용해할 수 있으며 소각시 유해 가스발생량이 매우 적은 특징등이 있기 때문에 지구 환경보호의 입장에서 폴리프로필렌 섬유가 재검토되고 있다. 이번 실험은 분산염료를 이용하여 농도별, 온도별, 시간별, 후처리시 시간과 온도의 변화로 가염 PP/PET 섬유의 염색특성을 알아보기 위해 실험 진행하였다. 실험에 사용되는 시약은 1급으로, $CH_3COOH$, NaOH, $Na_2S_2O_4$이며, 조제는 분산제, 정련제를 사용하였다. 먼저 온도별 실험에서 $40^{\circ}C$에서 승온하여 각각 $100^{\circ}C$, $110^{\circ}C$, $120^{\circ}C$, $130^{\circ}C$에서 온도에 따라 염색되는 정도를 알아보았다. 가장 높은 흡진을 보이는 온도에서 각각 40min, 50min, 60min, 70min 염색 유지시간 실험을 하여 염색이 안정되는 시간을 측정하였다. 위의 실험 결과 최적의 조건으로 염색농도에 따른 Build up 실험을 진행하였다. 가염 PP/PET 섬유는 일반 Polyester처럼 $120{\sim}130^{\circ}C$에서 가장 높은 염색농도 값(K/S)을 보인다. 또한 $130^{\circ}C$에서의 유지시간에서는 50 min 이상 진행시 더 이상의 흡진이 없거나, 염료의 탈락이 있음을 알수 있다. Build up 실험에서는 8.0%까지 실험하였지만, 결과는 그 이상농도를 사용하여도 염색은 가능함을 알 수 있었다. 후처리에 대한 실험에서 염료에 따라 차이가 있지만 크게 영향을 받지 않는 것으로 보이며, 제품성 평가 결과를 보면 후처리를 했을 경우 견뢰도가 우수한 것을 알 수 있었다.

• The Journal of the Petrological Society of Korea
• /
• v.17 no.2
• /
• pp.95-107
• /
• 2008

The Carved Buddhist Triad on Rock-cliff in Sinarnri (Treasure No. 680) consists of biotite granodiorite, which were positively carved on fore and west planes of four subvertical cliffs by two joint sets of NE-SW and NNW-SSE directions. The cliffs are $N50^{\circ}E\;85^{\circ}SE$ in fore plane, $N25^{\circ}W\;90^{\circ}$ in west plane, $N40{\sim}50^{\circ}E\; 82{\sim}85^{\circ}NW$, back plane, $N20^{\circ}W\;75^{\circ}SW$ in east plane, which are parallel to two joint sets of NE-SW and NNW-SSE directions in geology around it. The chemical index of alteration ranges 60.3 to 62.0 from the major elements in the rock that was weathered into producing kaolin minerals from alteration of feldspars and biotite. The Buddhist image has been deteriorated into joints, brown rusts, discolorations and granular disintegrations by such deterioration causes as deformation, moisture, temperature variation and microorganic living. The moisture, which leaks from groundwater in the rock, dissolve to decompose minerals.

• Journal of the Korea Concrete Institute
• /
• v.28 no.5
• /
• pp.611-620
• /
• 2016

In the construction of nuclear power plants, only 420 MPa reinforcing bars are allowed and, therefore, so many large-diameter bars are placed, which results in steel congestion. Consequently, re-bar works are difficult and the quality of RC structures may be deteriorated. To solve the steel congestion, 550 MPa bars are necessary. Among many items for verifying structural performance of reinforced concrete with 550 MPa bars, the 43 mm hooked bars are examined in this study. All specimens failed by side-face blowout and the side cover explosively spalled at maximum loads. The bar force was initially transferred to the concrete primarily by bond along a straight portion. At the one third of maximum load, the bond reached a peak capacity and began to decline, while the hook bearing component rose rapidly. At failure, most load was resisted by the hook bearing. For confined specimens with hoops, the average value of test-to-prediction ratios by KCI code is 1.45. The modification factor of confining reinforcement which was not allowed for larger than 35 mm bars can be applied to 43 mm hooked bars. For specimens with 70 MPa concrete, the average value of test-to-prediction ratios by KCI code is 1.0 which is less than the values of the other specimens. The effects of concrete compressive strength should be reduced. An equation to predict anchorage capacity of hooked bars was developed from regression analysis including the effects of compressive strength of concrete, embedment length, side cover thickness, and transverse reinforcement index.