• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.140-143
• /
• 2001

Digital shearography, a speckle pattern method is based on the superposition of two laterally sheared images. Therefore, object points which are positioned in some distance from each other are superposed in the image plane. This shearography, one of NDT methods without contact, is able to inspect defects in pipelines and pressure vessels that are used in nuclear power plants. This is can inspect whole fields and has a low sensitivity to environmental noise. Because optical setting is very simple, it has a little exhaustion of time, cost and man power. And also it can find a defect position through real time monitoring of a part. This paper, finds out the relationship among shearing quantity image quality and defect size with this method.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.280-282
• /
• 2005

초파리 초기 발생과정은 gap 유전자, pair-rule 유전자, polarity 유전자의 세 가지 유전자 그룹에 의해서 조직화 된다. Gap 유전자들에 의해 pair-rules 유전자들의 발현이 조절되며, 이들에 의해 결국 polarity 유전자들의 발현을 조절함으로써, 정확한 위치에서 각 기관의 형성을 유도한다. 특히 분열 14단계에서는 pair-rule 유전자 중의 하나인 eve 유전자의 발현이 조절되는데, eve 유전자는 배아의 분할의 줄무늬를 형성시키는 유전자에 해당된다. 본 논문에서는 eve 유전자의 발현조절자인 hunchback, giant, kruppel, bicoid의 gap 유전자들로 구성된 조절 네트워크를 S-system을 이용하여 모델링하였다. 이를 통해 각 유전자들의 발현 데이터로부터 파라미터들을 진화 연산을 통해 예측하고, 각 유전자들의 발현에 대한 시뮬레이션 결과를 보여준다. 예측된 결과와 실제 데이터의 비교는 전체적으로 패턴이 서로 유사함을 보여주고 있다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.2
• /
• pp.64-69
• /
• 2010

We investigated the variation in contact angle of a nano-sized water droplet on a nano stripe-patterned surface using molecular dynamics simulation. By changing the height and width of the stripe pillar, and the gap width of the stripes, we observed the contact angle of water droplet in equilibrium. When the surface energies were 0.1 and 0.3 kcal/mol, the calculated contact angles were in good agreement with the Cassie and Baxter equation. However, when the surface energy is 0.5 kcal/mol, the contact angles are observed to be perturbed along the Cassie and Baxter equation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.170-170
• /
• 2010

a-plane 혹은 m-plane면을 사용하는 무분극 GaN LED는 c축 방향으로 발생하는 분극의 영향을 받지 않기 때문에 분극 GaN LED에 비해 높은 내부 양자효율을 가진다. 또한 무분극 GaN는 상대적으로 고농도의 p-type 도핑이 가능하기 때문에 광효율을 높일 수 있다. 하지만 이와 같은 장점에도 불구하고 무분극 GaN는 성장모드의 비대칭으로 인해 높은 결정성과 mirror-like한 표면을 얻기가 힘들다. 본 논문에서는 Metalorganic chemical-vapor deposition (MOCVD) 장비를 사용하여 r-plane 사파이어 기판위에 a-plane GaN을 성장시켰다. 일반적으로 사용하는 저온에서의 nucleation layer 성장 대신 $1050^{\circ}$의 고온에서 성장 시킨후 일반적으로 사용하는 two-step 성장방법으로 그위에 5.5um정도의 GaN을 성장시켰다. 성장시 Trimethylgallium(TMGa)와 암모니아를 각각 Ga과 N 소스로 이용하였고 캐리어 가스는 수소를 사용하였다. 비대칭 결정성을 줄이기 위해 3D island growth mode에서의 성장조건을 바꾸어 c축과 m축 방향으로의 X-ray 결정성(FWHM) 차이가 564 arcsec에서 206 arcsec로 변화 시켰다. Normarski 현미경으로 표면을 관찰한 결과 v-defect이 없고 a-plane GaN에서 볼 수 있는 전형적인 줄무늬 패턴을 가지는 표면을 얻었으며 광학적 특성을 보기 위해 Photoluminescence (PL)을 측정하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.5
• /
• pp.1947-1955
• /
• 2013

The purpose of this paper is to present an photoelasticity technique for measuring the displacement and stress distribution in particle assembly subjected to shallow foundation loading. Photoelastic measurement technique was employed to visualize the force transmission of a particle assembly. A model assembly bounded by a steel frame was built by stacking bi-dimensional circular particles made of polycarbonate elastomer. Each particle was coated by a thin photoelastic sheet so that the force transmission represented by bright light stripes can be visualized. In a contacted particle, both magnitude and orientation of principal stress difference can also be measured via the photoelasticity technique. The different distributions of the contact stresses at the initial loading and near the failure were quantitatively compared. The photoelastic patterns and displacement fields observed in the pre-failure state disappears immediately after the buckling of confined force chains.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.1 no.1
• /
• pp.23-26
• /
• 2000

In spot welded joint. Electronic Speckle Pattern Interferometry(ESPI) method using the Model 95 Ar laser a video system and an image processor was applied to measure the stress Unlike traditional strain gauges or Moire method, ESPI method has no special surface preparation or attachments and can be measured in-plane displacement with non-contact and real time. In this experiment, specimens are loaded in parallel with a load cell. The specimens are made of the cold rolled steel sheet with 1mm thickness, are attached strain. gauges. This study Provides an example of how ESPI has been used to measure stress and strain inspecimen. The results measured by ESPI are compared with the data which was measured by strain gauge method under tensile testing.

• Journal of Korean Society for Geospatial Information Science
• /
• v.7 no.2 s.14
• /
• pp.23-34
• /
• 1999

The most widely used measure for indicating the accuracy of DEM is RMSE(nut Mean Square Error), which is used by many national mapping agencies such as the USGS and the Ordnance Survey. Its prevalent use can be followed by the relative ease of calculation and understanding the concepts. However, there are many problems with the measure and the way from which it is often derived. First of all, the index does not involve my description of the mean donation between the two measures of elevation,. This means that it cannot interpret the distributions or patterns of errors involved in DEMs. The distribution of errors in DEMs will show some forms of spatial patterning. In order to explore the real quality of DEMs as a useful database, alternative approaches are needed. In this paper, we examined so called ESDA(Exploratory Spatial Data Analysis) approaches, which were attributed by both aspatial and spatial exploration methods. Our experimental research shows that even simple ESDA methods reveal new aspects of errors, especially spikes, striation, and terracing effect in DEMs, which my be ignored by RMSE measure.

• Applied Microscopy
• /
• v.25 no.3
• /
• pp.75-81
• /
• 1995

The microstructural characterization of ternary $ZnS_{x}Se_{1-x}$(x=0.085) on GaAs(001) substrate grown up to $2{\mu}m\;at\;300^{\circ}C$ by molecular beam epitaxy(MBE) which has a single growth chamber was investigated by high resolution transmission electron microscope (HRTEM) working at 300 kV with point resolution of 0.18nm. The interface in the ZnSSe/GaAs specimen maintains a pseudomorphism with the substrate, but the epilayer has high density of stacking faults and moire fringes. The pits which had formed along <111> direction were found at the interface of ZnSSe/GaAs. The pits were responsible for producing defects in both epilayer and substrate. The wavy interface which has the difference of 15nm in height was found to maintain the pseudomorphism with the substrate and no stacking faults were found around the interface. However there exists faint and fine moire fringes in the epilayer near interface.

• Korean journal of applied entomology
• /
• v.59 no.3
• /
• pp.217-231
• /
• 2020

In 2019, the sex pheromones of Spodoptera frugiperda were used to examine moth trapping in cornfields in Gochang, Korea. Four types of traps were prepared, two funnel-types and two delta-types, each baited with 300 or 1000 ㎍ of a two-component (2C) blend of synthetic sex pheromones [100% (Z)-9-tetradecenyl acetate (Z9-14Ac) and 2% (Z)-7-dodecenyl acetate (Z7-12Ac)]. The greatest number of S. frugiperda were captured in the 300 ㎍ funnel-type trap (first catch: August 6). Large numbers of Mythimna loreyi (a non-target) were also caught in the funnel-type traps. Two wing-type traps were baited with 1000 ㎍ of the 2C blend or a four-component (4C) blend [100% (Z)-9-tetradecenyl acetate, 8% (Z)-11-hexadecenyl acetate (Z11-16Ac), 2% (Z)-7-dodecenyl acetate, and 1% (Z)-9-dodecenyl acetate (Z9-12Ac)] and the capture efficiency was assessed. Low numbers of S. frugiperda were captured regardless of the blend, and more M. loreyi were captured using the 4C blend. The two intraspecies groups clustered separately in a phylogenetic tree constructed using partial sequences (1004 bp) of cytochrome c oxidase subunit 1 (CO1). Of the 70 S. frugiperda captured in the pheromone traps, 66 belonged to CO1-RS (CO1 rice-strain) and 4 to CO1-CS (CO1 corn-strain). Twelve consistent single nucleotide polymorphisms (SNPs) were identified in CO1 between the CO1-RS and CO1-CS groups of S. frugiperda. Of the 73 S. frugiperda, 4 had the same SNP pattern as the CO1-CS group (including the corn strain) and 69 had the same SNP pattern as the CO1-RS group (including the rice strain).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.909-916
• /
• 2009

This paper presents the automatic vision algorithm to generate and calibrate reference phase plane to improve the accuracy of 3D measuring machine of using phase shifting projection moire method, which is not traditional N-bucket method, but is based on direct image processing method to the pattern projection image. Generally, to acquire accurate reference phase plane, the calibration specimen with well treated surface is needed, and detailed calibration method should be performed. For the cost reduction of specimen manufacturing and the calibration time reduction, on the specimen, not specially designed, with general accuracy level, an efficient calibration procedure for the reference phase generation is proposed. The proposed vision algorithm is developed to extract the line center points of the projected line pattern from acquired images, derive the line feature information consisting of its slope and intercept by using sampled feature points, and finally generate the related reference phase between line pairs. Experimental results show that the proposed method make reference phase plane with a good accuracy under noisy environment and the proposed algorithm can reduce the total cost to make high accurate calibration specimen, also increase the accuracy of reference phase plane, and reduce the complex calibration procedure to move grid via N-bucket algorithm precisely.