• Journal of Korea Water Resources Association
• /
• v.56 no.10
• /
• pp.667-678
• /
• 2023

In this study, quasi-3D inundation flow simulations were conducted for a simplified subway station configuration. The effects of variations in rainwater inflow locations and discharge were investigated, analyzing the resulting inundation flow patterns and flood risk. The inundation simulation results calculated the incipient velocities for slipping and toppling accidents to assess pedestrian safety. The results indicated that velocities exceeding the incipient velocity for slipping accidents mainly occurred on the flooded staircase. Meanwhile, velocities surpassing the incipient toppling accidents were observed around the staircase and the corridor near the staircase leading to B2F. This observation is consistent with the results from the specific force distribution analysis. To provide detailed flood risk assessments, the Flood Hazard Degree (FD) was applied with four levels of criteria, along with the Flood Intensity Factor (FIF). The results demonstrated that FD identified a broader area at risk of flood-induced consequences compared to FIF. When comparing the different inundation risk assessment methods, the specific force method tended to overestimate the risk area, whereas FIF tended to underestimate it. Furthermore, among all assessment methods, the influence of rainwater discharge was found to have a more dominant effect on flood risk assessment compared to the number of rainwater inflow locations. Additionally, the direction of inundation flow influenced the assessed risk, with collision-induced flow patterns leading to higher flood risk than those with identical flow directions.

• Proceedings of the Korean System Dynamics Society
• /
• 2003.08a
• /
• pp.83-108
• /
• 2003

한 산업에서 인력 수급을 전망하는 것은 인력의 수요자인 기업의 측면에서는 안정적인 인력 확보 전략을 수립하기 위해서, 공급자인 산업 종사자들에게 있어서는 자신들이 앞으로 진출해야할 산업의 매력도를 파악하기 위해서, 그리고 정부 차원에서는 관련 산업에 있어서 중복 투자의 방지와 효율적이고 균형 된 산업 발전을 위한 정책 수립을 위해서 매우 중요하다. 그러나 이러한 인력 수급 전망들은 종종 잘못된 시장 분석으로 인하여 인력의 과소 공급 또는 과잉 공급이라는 의도하지 않은 결과를 가져오는 경우가 있다. 이는 전체적인 시각에서 시장의 구조적 특성을 분석하기보다는 현상을 조사하는 수준에 머물거나 현재의 상황 또는 단일 산업만을 고려할 뿐 시간의 흐름에 따른 동태적 변화와 지연된 피드백의 효과, 그리고 관련 산업간의 유기적 연관관계를 반영하지 못한 채 단기적이고 단선적인 관점에서 인력 수급을 전망하는데 그 원인이 있다고 볼 수 있다. 특히, 다른 산업과의 연관 관계가 복잡하고 인력의 수요의 급증에도 불구하고 산업에서 요구하는 인력을 양성하기까지 많은 시간이 소요되는 첨단 산업 및 신생 산업에서의 경우 이러한 현상은 더욱 두드러지게 나타날 수 있다. 이러한 관점에서 본 논문은 변수간의 상호 동태적인 관계와 시간의 흐름에 따른 행태를 분석하는 데 용이한 SD 방법론에 기초하여 최근 빠르게 성장하고 있는 정보보호산업에서의 동태적인 인력 수급 모델을 구현하여 향후 국내 정보 보호 인력의 수급 행태가 어떻게 전개될 것인지를 분석해 보았으며 이를 통하여 동태적 시각에서 인력 수급 불균형 현상의 원인을 파악하고 문제 해결을 위한 대안을 제시하고자 한다.채취하여 임신진단키트(제네디아프로테 트, 녹십자)를 이용하여 임신여부를 1차적으로 확인하였다. 과배란을 유기한 13두의 공란우중 9두(69.2%)가 과배란 반응을 나타내었으며, 회수된 수정란 51개중 이식가능수정란은 38개(74.5%) 였다. 발정동기화를 유도한 수란우 40두중에서 35두(87.5%)가 발정이 동기화되었으며, 그 중 황체검사를 통하여 30두의 수란우에 수정란을 이식하였다. 수정란이식후 13일(발정주기 21일)에 혈액을 이용한 임신진단에서 농가별 수태율은 각각 37.5%, 70.0%, 60.0% 및 71.4% 로서 평균 60.0%를 나타내었다.서 39$^{\circ}C$, 5% $CO_2$ 배양기에 48시간 배양하면서 생존여부를 판단하였다. 실험 2에서 확장배반포배 수정란이 25.3%의 생존율을 나타내었으며, 실험 1과 실험 3에서는 수정란의 형태와 관계없이 생존성을 확인할 수 없었다. 이상의 결과로 보아 glycerol 완만동결에서는 확장배반포기 수정란 이상이 보존가능한 것으로 추정되나 더 추가적인 연구가 요구된다.c kinase 활성의 변동은 정소 내 간충조직, 세정관 상피의 증식 및 기능적 분화 과정을 매개하는 생리적 활성분자 수용체 하위의 신호전달 과정에 Src-Csk loop에 의한 조절가능성을 확인할 수 있었다.rugrene의 향기성분이 주요 성분군으로 확인되었다. 2. 생강나무에서 생강의 향기를 발산하는 성분으로는 $\beta$-myrcene, o-terpinolene, phellandrone, ι-limonene, $\beta$-eudes

• Management & Information Systems Review
• /
• v.28 no.4
• /
• pp.229-252
• /
• 2009

The purpose of this study is to find out the determinants of knowledge management adoption through the analysis which examine structural relationships among knowledge management-based structure, knowledge management activities and business performance using the BSC(Balanced Scorecard) perspective. This study also gives the suggestion for the effective knowledge management implementation in the korean companies. This study has been conducted using the data collected from 91 companies implementing knowledge management. By analyses of the questionnaires, empirical results show that 3 factors of knowledge management-based structure, except organizational structure, have positive effect on knowledge management activities, and the implementation of knowledge management activities has positive effect on business performance with 3 perspectives of BSC, except financial performance. This study showed that more consideration are essential to obtain balanced business performance for companies with knowledge management adoption plan.

• The korean journal of orthodontics
• /
• v.32 no.2 s.91
• /
• pp.91-105
• /
• 2002

In general, orthodontists make problem lists and treatment plans based on norms of several cephalometric standards. But consideration of dentoalveolar compensation, which tends to maintain normal dental arch relationship in various skeletal jaw relationships, helps orthodontists make more individualized treatment objectives and plans. The purpose of this study was to classify skeletal patterns of normal occlusion samples by cluster analysis and to investigate the dentoalveolar compensation according to skeletal patterns. The subjects were consisted of 125 subjects who were normal occlusion samples at Seoul National University Dental Hospital, Department of Orthodontics. Lateral cephalograms in centric occlusion were traced and digitized. The skeletal patterns of normal occlusion samples were classified into three horizontal groups and three vertical groups by cluster analysis and ANOVA on the skeletal and dentoalveolar measurements among the groups were carried out. The results were as follows ; 1. Anteroposterior and vertical skeletal relationships of normal occlusion samples were very variable. 2. As the mandibular position was anterior to the maxilla, the maxillary incisors inclined more labially, the mandibular incisors more lingually, and the occlusal plane was flattened due to the anteroposterior dentoalveolar compensation. dentoalveolar height was decreased and upper posterior teeth was uprighted to the palatal plane and lower incisors and lower posterior teeth to the mandibular plane. 4. Lower incisors were more strongly associated with the dentoalveolar compensation than upper incisors according to the anteroposterior and vertical skeletal relationship.

• Spatial Information Research
• /
• v.23 no.4
• /
• pp.91-101
• /
• 2015

Due to recent increase of indoor spatial information demands, several international standards have been published for indoor spatial information. OGC has also recently published two standards for indoor space; CityGML and IndoorGM. CityGML aims to provide a standard for 3D city modeling and the level of details (LoD) 4 covers the indoor space. IndoorGML focuses only on indoor space and provides several functions to complement the weakness of CityGML. It is therefore recommended to apply IndoorGML as a combination with CityGML. However since the weakness and strengths between these standards are not yet fully studied and understood, there is no well-defined guideline to apply them in a proper way. It means that we need to carry out a comparative study between them for their proper integration. For this reason, we discuss the pros and cons of these standards from two use-cases. The sites for the use-cases cover Lotte World Mall and Jongno-5 subway station, respectively. We studied these use-cases to compare CityGML and IndoorGML through the data construction of CityGML and IndoorGML for these sites. And based on several application scenarios, we also analyzed the weakness and strengths of each standard from different viewpoints. We expect that these comparative studies will be helpful to make a guideline on the application and integration between CityGML and CityGML.

• Journal of Life Science
• /
• v.20 no.2
• /
• pp.153-160
• /
• 2010

This study was conducted to examine the utilization of immunohistochemistry using the bovine anti-brucella immunoglobulin G (IgG) antibody in the diagnosis of brucellosis and to develop a functional biomarker relation for the progress of the disease. Anti-brucella IgG antibody was purified from the affected bovine serum using an affinity chromatography. We performed our investigation on 17 cases of brucellosis and 19 control cases with negative Rose-Bengal test results. Our purified anti-brucella IgG antibody showed a positive immunoreactivity in cytoplasmic hepatocytes of the centrilobular region, and glomeruli and tubular epithelium of the kidney. The protein pattern of the affected liver versus control was analyzed by two-dimensional electrophoresis, showing a different expression pattern of proteins between the two. Five protein spots were up-regulated and another were five down-regulated in the brucellosis liver. Significant upregulaton of catalase and 3-hydroxyacyl-CoA dehydrogenase might be due to a compensatory reaction in response to the endotoxic shock of brucella. In conclusion, the anti-brucella IgG antibody may be a good tool for discriminative diagnosis of the affected tissues and proteomics data suggest new target proteins underlying a possible pathogenic mechanism of brucellosis.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.3
• /
• pp.79-84
• /
• 2010

Formation of TSV (Through-Si-Via) with an Au seed layer and Cu filling to the via, simplification of bumping process for three dimensional stacking of Si dice were investigated. In order to produce the via holes, the Si wafer was etched by a DRIE (Deep Reactive Ion Etching) process using $SF_6$ and $C_4F_8$ plasmas alternately. The vias were 40 ${\mu}m$ in diameter, 80 ${\mu}m$ in depth, and were produced by etching for 1.92 ks. On the via side wall, a dielectric layer of $SiO_2$ was formed by thermal oxidation, and an adhesion layer of Ti, and a seed layer of Au were applied by sputtering. Electroplating with pulsed DC was applied to fill the via holes with Cu. The plating condition was at a forward pulse current density of 1000 mA/$dm^2$ for 5 s and a reverse pulse current density of 190 mA/$dm^2$ for 25 s. By using these parameters, sound Cu filling was obtained in the vias with a total plating time of 57.6 ks. Sn bumping was performed on the Cu plugs without lithography process. The bumps were produced on the Si die successfully by the simplified process without serious defect.

• Land and Housing Review
• /
• v.3 no.4
• /
• pp.343-355
• /
• 2012

The purpose of this paper is to propose reasonable improvements of demand estimation methods of commercial site through the case study. Thus, we investigated the problems and limitation of demand estimation methods and process applied to primary and secondary new towns in Korea. And we suggested the way to reduce error of demand estimation and to raise its objectivity. The result of case analysis is as follows; firstly, it was insufficient to consider location, hierarchy and change of land use like mixed-use development in commercial site. Secondly, improper comparable group or operated relevant index data in the same light were selected the aggregated unit requirement method such as comparative analogy method and planning guidelines. Thirdly, there were many cases that demand estimation value was amended arbitrarily, and it tends to occur a serious reliability problem. Therefore, to improve these problems and to make better use of demand estimation hereafter are required the sublation of arbitrary commercial sphere's settings, the making of comparative group considered development conditions, and putting forward objective revision basis.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.4
• /
• pp.204-211
• /
• 2011

A dynamic analysis procedure is developed to provide a better estimation of the dynamic responses of bridge during the passage of high speed railway vehicles. Particularly, a three dimensional numerical model including the structural interaction between high speed vehicles, bridges and railway endures to analyse accurately and evaluate with in-depth parametric studies for dynamic responses of various bridge span lengths running KTX railway locomotive up to increasing maximum speed(450km/h). Three dimensional frame element is used to model the simply supported pre-stressed concrete (PSC) box bridges for four span lengths(40~25m). Track irregularity employed as a stationary random process from the given spectral density functions and irregularities of both sides of the track are assumed to have high correlation. The high-speed railway vehicle (KTX) is used as 38-degree of freedom system. Three displacements (Vertical, lateral, and longitudinal) as well as three rotational components (Pitching, rolling, and yawing) are considered in the 38-degree of freedom model. The dynamic amplification factors are evaluated by the developed procedure under various traveling conditions, such as track irregularity camber, train speed and ballast. The dynamic analysis such as Newmark-${\beta}$ and Runge-Kutta methods which are able to analyse considering the dynamic impact factors are compared and contrasted.

• Korean Journal of Social Welfare
• /
• v.35
• /
• pp.231-261
• /
• 1998

This study was designed to find out a degree of social stigman on people with mental disorder. Many comparisons were made. The first was a comparison with the stigma on the physically disabled. And the differences between general public, the mentally ill, their families, and professionals were explored. Among general public attitudes, the sociodemographic and regional differences were also explored. The subject was 600 people, including 300 general public, 100 mentally ill, 100 families, 100 professionals. They were evenly distributed to 3 regions - big city, urban area, and rural area. The data were collected by a survey questionnaire consisting of the Attitude toward People with Mental Illness Scale, and the Attitude toward People with Physical Disabilities Scale. The analysis showed that the public attitude toward the mentally ill was quite acceptable. Social stigma was low in areas like accepting his/her human right. But the public also showed low acceptance on areas in allowing social functioning roles, and social integration. High stigma on the hospitalized mentally ill was expressed to those hospitalized patients regarding divorce against their will. However, volunteer experiences with this population seemed influential in high acceptance and low stigma. In comparison with the stigma on people with physical disabilities, the results showed. different levels in different areas. In regional comparison, the results showed that big city is the lowest among three. And the results of urban and rural area revealed different levels in different areas. In regard to self-stigma, while the subjects expressed low in general, they revealed high on areas like relating with others. Based on the findings, the study would conclude that mental health policy should be community-based, social integration oriented policy instead of in-patient oriented policy. Moreover, the professionals should intervene on the elements affecting both negative and positive attitudes.