• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.1044-1051
• /
• 1989

A numerical calculation is carried out for the analysis of 3-dimensional compressible flow field in axial-flow rotating blades by using finite element method. The calculation of flow in impellers plays a dominant role in the theoretical research and design of turbomachines. Three-dimensional flow fields can be obtained by the quasi-three-dimensional iterative calculation of the flows both on blade-to-blade stream surfaces and hub-to-shroud stream surfaces with the introduction of viscous loss model in order to consider a loss due to viscosity of fluid. In devising the loss model, four primary sources of losses were identified: (1) blade profile loss (2) end wall loss (3) secondary flow loss (4) tip-leakage loss. For the consideration of an axially parabolic distribution of loss, the results of present calcullation are well agreed with the results by experiment, thus the introduction of loss model is proved to be valid.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.6
• /
• pp.81-88
• /
• 2013

The component based propulsion modeling and simulation of an dual ramjet engine using Taylor-Maccoll flow equation and quasi 1-D combustor model. The subsonic and supersonic intake were modeled with Taylor-Maccoll flow having $25^{\circ}$ cone angle, the gas generator which transfers a pre-combustion gas into supersonic combustor was developed using Lumped model, and the determination of the size of nozzle throat of a gas generator was described. A quasi 1-D model was applied to model a supersonic combustor and the variation of temperature and pressure inside combustor were presented. Furthermore, the thrust and specific impulse applying fuel regulation by pressure recovery ratio and equivalence ratio were derived.

• Journal of Korea Water Resources Association
• /
• v.32 no.2
• /
• pp.131-142
• /
• 1999

In this study, one and semi-two dimensional numerical models were applied to study on the hydraulic and sedimentologic characteristics of upstream and downstream channel section near the Buyeo intake towers. The HEC-6 model was applied for the simulation of one dimensional sediment movement from 1988 to 1996, and GSTARS model was applied for the simulation of semi-two dimensional sediment movement for the same period. After the verification of accuracy of HEC-6 and GSTARS models, the models were applied again to predict the sediment movement near intake towers from 1988 to 2001. In this case, measured channel section of 1988 was used as an initial channel condition, and used to predict the long-term variation of channel section of 2001 after 13 years since 1988. The simulation results show that the channel bed is sedimented and eroded repeatedly in the main channel of overall study area, and that channel bed is getting elevated in the near Buyeo intake towers.

• Journal of the Korean Vacuum Society
• /
• v.17 no.6
• /
• pp.511-517
• /
• 2008

A quasi two-dimensional model for numerical simulation of gas discharge is presented, based on the finite-element flux-corrected transport method. A one-dimensional continuity convection-diffusion equation coupled Poisson's equation is solved to calculate the charge density variation and the electric field is evaluated by the classical disk method. Results calculated for various benchmark problems verify the accuracy of the proposed model and illustrate its performance. This model has been applied to a streamer simulation, and the results are shown to agree well with previously published results.

• Geophysics and Geophysical Exploration
• /
• v.18 no.4
• /
• pp.216-222
• /
• 2015

Airborne transient electromagnetic (ATEM) surveying was introduced several decades ago in the mining industry to detect shallow conductive targets. However, conventional ATEM systems have limited depth of investigation because of weak signal strength. Recently, the grounded electrical source airborne transient electromagnetic (GREATEM) system was proposed to increase the depth of investigation. The GREATEM is a semi-airborne transient electromagnetic system because a long grounded wire is used as the transmitter. Traditionally, ATEM sounding data have been interpreted with 1D earth models to save the computing time because modern ATEM systems generally collect large data sets. However, the GREATEM 1D modeling requires numerical integration along the wire, so it takes much more time than the 1D modeling of conventional ATEM. In this study, the adaptive Born forward mapping (ABFM) was applied to the ATEM 1D modeling because the ABFM is incommensurably faster than the ordinary GREATEM 1D modeling. Comparing the results from ordinary and ABFM 1D modeling, it was confirmed that the ABFM can be applied to the 1D modeling of GEATEM.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2008.11a
• /
• pp.43.1-43.1
• /
• 2008

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.10a
• /
• pp.157-157
• /
• 1998

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.1
• /
• pp.60-60
• /
• 2020

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.162-165
• /
• 2005

The objective of this research work is to investigate into the three-dimensional temperature distribution using quasi steady-state heat transfer analysis fur the case of the laser cutting of CSP 1N sheet using high power CW Nd:YAG laser. The laser heat source is assumed as a volumetric heat source with a gaussian heat distribution in a plane. Through the comparison of the results of analyses with those of the experiments, the optimal finite element model is obtained. Finally, characteristics of the three-dimensional heat transfer and temperature distribution have been estimated by the optimal finite element model.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.89-93
• /
• 2006

횡월류식 천변 저류지를 포함하는 하천수계의 흐름 모의를 위한 준2차원 계산모형을 수립하였다. 수립된 모형은 횡월류 흐름에 대해서는 수량보존에 관한 연속방정식 및 월류형 수위-유량 관계식을, 하도에 대해서는 1차원 부정류에 대한 St. Venant 방정식을 각각 지배방정식으로 하여 흐름을 모의하는 폐합형 계산모형이다. 남한강 구간의 가상의 천변 저류지를 설치한 경우에 대하여 개발된 모형을 적용, 횡월류식 천변저류지의 설계변수들을 결정하기 위한 분석 방법을 제시하기 위한 연구가 진행 중에 있다.