• The Journal of the Acoustical Society of Korea
• /
• v.32 no.1
• /
• pp.71-78
• /
• 2013

This paper describes a multiple audio watermarking using Quantization Index Modulation (QIM) on frequency phase and magnitude response. Proposed embedding procedure is composed of two stage. At the first stage, the watermark is embedded on the frequency phase response using QIM. In the second stage, the watermark is embedded using adaptive QIM with the step-size that is adaptively determined using the maximum value of the frequency magnitude response of every frame. The watermark is extracted by calculating the Euclidean distance as the blind detection. The proposed method is robust against most of attacks of audio watermark benchmarking. For the Fourier attacks, the proposed method shows over 95% recovery rate.

• Korean Journal of Optics and Photonics
• /
• v.12 no.4
• /
• pp.327-333
• /
• 2001

Estimation of the frequency response of Ti:LiNb03 traveling-wave optical modulator with phase reversal electrodes is succinctly presented. The fact that such devices may have bandpass characteristics is demonstrated through simulations based on the derived equations. The influence of each parameter of traveling-wave electrodes on the frequency response is investigated in detail. It is shown that the center frequency and the bandwidth of response curves can be effectively adjustable by changing the MW effective index and the interaction length of the electrodes. rodes.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.4
• /
• pp.99-104
• /
• 2019

It was proposed the use of an inducive element to measure the SOH of a secondary battery by phase response. As a result of simulating the Randles equivalent model of a secondary battery, the inductive element used as the load has a high response characteristic and increases the maximum phase response frequency band. In order to obtain the frequency band in which the phase response characteristic of the secondary battery is well observed, the phase response was measured with the change of the inductance value of the inductive element, 33uH,49mohm inductive element with the maximum phase response at 631Hz was used. The phase response measurements for secondary battery with different SOH showed that the phase response for each 20% of SOH showed a difference of about 3.8(degree), enabling the SOH diagnosis of secondary battery by the phase measurement for the inductive element.

• The Journal of the Acoustical Society of Korea
• /
• v.9 no.6
• /
• pp.45-52
• /
• 1990

본 논문에서는 원하는 방향에 대해서 선형 위상 응답 특성을 갖는 적응 빔 형성기에 대해서 설 명한다. 본 논문에서는 제안하는 빔 형성기는 원하는 신호에 대해서 선형 위상 응답 특성을 얻기 위해 전방 적응 빔 형성기와 후방 적응 빔 형성기를 이용한다. 두 빔 형성기의 각각의 출력 신호를 합하여 원하는 신호를 얻는다. TDL 필터 계수는 가상신호와 출력 신호간의 차이 값의 파워가 최소가 되도록 조정된다. 원하는 방향에 대한 빔 형성기의 임펄스 응답이 중심 샘플에 대해서 대칭이 되도록 원하는 방향에서 입사되는 신호에 대한 선형 위상 응답 특성을 얻을 수 있다. 출력 잡음 분산을 최소로 하는 반면 원하는 신호 방향에 대한 주파수 응답의 왜곡을 미리 정한 허용치보다 작게 함으로써 음성 신호 를 향상시키는 AMNOR 시스템에 본 논문에서 제안한 빔 형성기를 적용하여 컴퓨터 시뮬레이션 결과 를 제시한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7C
• /
• pp.658-666
• /
• 2007

In general, the earlier linear-phase MAXFLAT(maximally flat) lowpass FIR filters have the main disadvantage of a gain response in the half frequency band $(0{\leq}w{\leq}{\pi}/2)$ by the closed form transfer functions used in design techniques for realizing them. Moreover, most of them has existent problems as follows : ripple error in the stopband, gentle-cutoff attenuation, phase and group delay and inexact cutoff frequency response. It is due to the approximation algorithms such as Chebyshev norm and Remez exchange which are used to approach MAXFLAT and linear-phase characteristics in frequency domain. In this paper, a new mathematically closed-form transfer function is introduced for the design of MAXFLAT lowpass FIR filters which have the zero-phase and wideband-gain response. In addition, we verify that the closed-form transfer function is easily realized due to our generalized formulas derived newly by using MAXFLAT conditions including an arbitrary cutoff point. This method is, therefore, useful for "simple and quick designs". Conclusively, we propose a technique for the design of new zero-phase wideband MAXFLAT lowpass FIR filters which can achieve sharp-cutoff attenuation exceeding 250 dB almost everywhere.

• ICROS
• /
• v.17 no.1
• /
• pp.31-38
• /
• 2011

주파수 영역에서 제어기를 설계하기 위해서는 시스템의 대역폭, 초대 주파수 응답, 저주파에서의 이득, 고주파에서의 이득 감쇄 정도를 고려한다. 또한 나이퀴스트 선도, 보우드 선도 등을 활용하여 폐루프 제어 시스템의 이득여유, 위상 여유를 확보할 수 있도록 한다. 일반적으로 저주파 영역에서는 개루프의 이득이 기준치보다 크도록 하고, 고주파수 영역에서는 기준치보다 작도록 설계를 하며, 폐루프 응답에서 대역폭이 유지되고, 공진피크점의 응답 크기는 1에 비하여 과도하게 크지 않도록 설계를 한다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2249_2250
• /
• 2009

전력계통이 대규모, 다양화됨에 따라 계통의 안정화를 위한 광역보호계전 지능화 기술 개발이 요구되고 있다. 이를 위해서 네트워크 기반 주파수 모니터링 및 고장예측 시스템 개발 분야에 관심이 증대되고 있다. 본 논문은 정확한 주파수 계측을 위해서 요소기술로 필수적으로 사용해야하는 DFT 필터의 크기 응답, 위상 응답 등에 대해 연구하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.11
• /
• pp.1178-1185
• /
• 2009

In this paper, a wideband ultra-high speed & high purity discrete frequency synthesizer having minimum 2.5 MHz step size was proposed. To achieve fast and wideband operation, discrete frequencies were synthesized by mixing of 3 different pre-synthesized 16 frequencies made from fixed PLL and frequency dividers. Frequencies with discrete 2.5 MHz step were produced in 710~1,610 MHz. The measured hopping response time was 350 nsec average, output level was 21.5 dBm average with 2.65 dB flatness, spurious and harmonics level were suppressed below -60 dBc, and phase noise was -94 dBc/Hz@100 Hz. Also, a new measurement method for synthesizer response time was described.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.267-273
• /
• 2004

This paper targets to define controlling factors of pressure-coupled combustion response and estimate their effects on droplet evaporation process. Dynamic characteristics of hydrocarbon propellant vaporization perturbed by acoustic pressure are numerically simulated and analyzed. 1-D droplet model including phase equilibrium between two phases is applied and acoustic wave is expressed by harmonic function. Effects of various design factors and acoustic pressure on combustion response are investigated with parametric studies. Results show that driving frequency of acoustic perturbation and ambient pressure have important roles in determining magnitude and phase of combustion response. On the other hand, other parameters such as gas temperature, initial droplet size and temperature, and amplitude of acoustic wave cause only minor changes to magnitude of combustion response. Resultant changes in phase of heat of vaporization and thermal wave in droplet highly influence magnitude and phase of combustion response.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.53-54
• /
• 2008

플랜트의 모델 없이 주파수 응답만으로 안정도와 여러 성능(이득여유, 위상여유, $H_{\infty}$ 여유)을 만족하는 1차 보상기 설계 이론이 최근에 발표되었다[1]. 그중 안정도를 만족하는 제어기의 셋을 구하는 것의 수치해를 [6]에서 제시하였고, 본 논문에서는 그것을 확장하여 여러 성능을 동시에 만족하는 셋을 구하는 알고리즘을 제시하고 그것을 이용한 MATLAB용 설계 도구를 소개한다.