• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.350-353
• /
• 2013

In this paper, a hardware implementation of phase calculator for extracting 3D depth image from TOF(Time-Of-Flight) sensor is proposed. The designed phase calculator, which adopts redundant binary number systems and a pipelined architecture to improve throughput and speed, performs arctangent operation using vectoring mode of DCORDIC algorithm. Fixed-point MATLAB simulations are carried out to determine the optimized bit-widths and number of iteration. The designed phase calculator is verified by emulating the restoration of virtual 3D data using MATLAB/Simulink and FPGA-in-the-loop verification, and the estimated performance is about 7.5 Gbps at 469 MHz clock frequency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.10
• /
• pp.1469-1482
• /
• 1993

A new image coding technique has been proposed based on the wavelet transform. To achieve lower ceding rates and good qualities in reconstructed images, some of wavelet coefficients were removed by thresholding and quantized in accordance with the sensitivity of the human visual system(HVS). For each block of subimages in wavelet transform domain, block thresholding scheme has been used to remove the unimportant wavelet coefficients according to the frequency characteristic and statistical property of wavelet coefficients. The location information of quantized blocks and removed blocks were encoded using run-length coder which is effective for the exponential distribution. Quantized coefficients were encoded using variable length coder which matches well to their distribution. Simulation results show that the reconstructed images maintain high quality with the low bit rate, below 1.0 bits per pel.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.614-616
• /
• 2017

In this paper, based on the conventional SC-FDE structure, we propose a new SC-FDE structure to cope with narrow band jammer. In the conventional SC-FDE structure, channel estimation is performed in the time domain. When a narrow band jammer exists, time-domain channel estimation is very difficult due to high power jamming interference, which degrades receiver performance. To relieve from this problem, a new SC-FDE frame is proposed to enable channel estimation under narrow band jamming environments. In this paper, we proposed a modified SC-FDE structure that can perform channel estimation in the frequency domain, and verified the performance via computer simulation.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.1
• /
• pp.112-119
• /
• 2002

We propose an enhanced wavelet packet image coder algorithm which is based on the coefficients partition. The proposed wavelet packet image coder uses the first-order entropy to reduce the total compression time, and achieves low bit rates and rate-distortion performance by the zero-tree based coding using correlations between coefficients partition. This new algorithm represents new parent-children relationships for reducing image reconstruction error using the correlations between each frequency subbands and then the wavelet packet coefficients are Partitioned by a new order. The computer simulations demonstrate higher PSNR under the same bit rate and improved image compression time and enhanced rate control compare with conventional algorithms. From the simulation results, it is shown that the encoding and decoding process of proposed coder are much simple and accurate than present method against texture images , which include many mid-frequency elements.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.6
• /
• pp.269-275
• /
• 2007

Pervasive Multi-channel audio systems are being realized due to advances in digital technology. This paper proposes an efficient system that serially connects individual speakers with bidirectional digital communication capability by means of SoC design. In particular, each speaker can identify the bit stream assigned to the speaker and convert it into analog audio. Furthermore, the speaker can self-diagnose the speaker functionality by utilizing the designed capability to measure frequencies of various square wave test signals. The proposed system running on 200MHz clock yielded restoration of analog output signal with latency of only $500{\mu}s$ compared to directly driving the speakers in a traditional way.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.5
• /
• pp.45-53
• /
• 2007

To recover transmitted signal perfectly at DTV receiver, we have to acquire carrier frequency synchronization to compensate pilot signal which located in wrong position and rotated phase. Also, we need a symbol timing synchronization to compensate sampling timing error. Conventionally, to synchronize symbol timing, we use Gardner's scheme which used in multi-level signal. Gardner's scheme is well known for its sampling the timing error signal from every symbol and it makes easy to detect and keep timing sync in multi-path channel. In this paper, to discuss the problem when the received power level is out of range and we cannot get synchronization information. With this problem, we use 2 step procedures. First, we put a received signal power compensation block before Garder's timing error detector. Second, adaptive loop filter to get a fast synchronization information and averaging loop filter's output value to reduce the amount of jitter after synchronization in PLL(Phased Locked Loop) circuit which is used to get a carrier frequency synchronization and symbol timing synchronization. Using the averaging value, we can estimate offset. Based on offset changing ratio, we can adapt adaptive loop filter to carrier frequency and symbol timing synchronization circuit.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1999.11b
• /
• pp.99-104
• /
• 1999

영상을 획득하는 과정에 있어, 영상획득 장치 또는 피사체의 흔들림으로 인해 발생되는 움직임 열화(motion-blur)현상은 영상의 선명도를 크게 떨어뜨리는 주된 원인이 된다. 손상된 영상은 그 영상자체로부터 움직임의 각도와 길이를 추출 함으로서 복원될 수 있다. 본 논문에서는 움직임 열화의 각도와 길이를 추정하기 위한 방법 중, 본 저자가 제안 했던 극점자취방법에, 확률적인 개념을 적용한 새로운 확률적 극점자취 방법을 소개한다. 기존의 방법은 신호지배영역이 올바로 지정되지 않았을 경우, 오차를 수반하기도 한다. 이러한 문제를 해결 하기 위해, 본 연구에서는 maximum likelihood(ML) 분류방법을 이용해 적절하지 않은 극점자취점의 영향을 선택적으로 작게 하여, 신호지배 영역의 설정 없이, 저주파 영역에서의 올른 극점자취의 검출이 가능하도록 하였다. 또한, Auto-regressive(Ah) 모델을 이용한 선형예측방법을 통해 극점 검출과정에서 불규칙하게 발생하는 특이점들이 극점으로 검출되지 못하도록 하여, 정밀한 움직임 방향의 추정이 가능하게 하였다. 또한, 움직임 길이의 검출에 있어서는, 노이즈에 의해 영향을 무시할 수 없는 기존의 영점교차점 방법을 보완한, 새로운 이동평균최소(MALM)법을 정의하였다 이 방법은 움직임 열화가 발생한 영상의 주파수 영역단면 패턴을 이용한 것으로서, 2차원적인 sinc함수를 1차원적인 표현으로 바꾸어주는 이동평균함수를 사용하여, 쉽게 부극점(sub-peak point)을 찾을 수 있도록 한다 부극점 또한 노이즈에 의한 영향을 받지 않고, 이동평균최소법 자체에 노이즈를 제거하는 과정에 포함되어있으므로. 이 방법을 사용하게 되면, 심한 노이즈 환경에서도 적절한 움직임의 길이 값을검출할 수 있다. 이렇게 얻어진 길이와 방향의 파라메터를 이용하여, 실제 실험에 사용된 손상되어진 영상을 효과적으로 복원할 수 있었다.>$\bigcirc$ 펄라이트 : 합섬A(비스코스+레이온)급액천의 유입은 소(1$\times$60cm)에서 21.8ml, 중(2$\times$60cm) 33.5ml, 대(3$\times$60cm) 43.4ml가 통과되었고 합섬(폴리에스텔)에서는 19.0~30.7ml로서 급액천의 규격에 따라 통과되는 차이가 있었다. 배지가 규격화되어 있어 급액천의 규격별로 일정하게 유입되었으며 급액천의 재질이 유입에 영향을 미친 것으로 사료되었다. (2) 급액관과 베드상과의 높이에 따른 유출양 : 급액과 베드상과의 낙차가 클수록 유출이 증가함을 알수 있었으나 합섬C(인견)실험구에서는 낙차가 유출에 영향을 미치지 않았다. (4) 급액된 양액의 EC 및 pH조사 : 급액된 양액의 EC 및 pH에 전혀 변화가 없어 재배 적응에 문제가 없을것으로 사료되었다.이가 가장 이상적인 것으로 생각된다.세포수에 대한 내부세포괴세포(ICM/total cells)가 20~40% 범주에 드는 비율은 처리구가 대조구보다 낮은 결과를 나타냈다. 결론적으로 돼지난포란을 이용하여 체외성숙을 유기할 때 효과적인 cysteamine의 농도는 50$\mu$M이 적당하며, 초기배발달을 유기할 때의 효과적인 cysteamine의 농도는 25~50$\mu$M인 것으로 판단된다.N)A(N)/N을 제시하였다(A(N)=N에 대한 A값). 위의 실험식을 사용하여 헝가리산 Zempleni 시료(15%$S_{XRD}$)의 기본입자분포로부터 %$S_{XRD}$를 계산한 결과, 16%$S_{XRD}$의 결과값을 얻을 수 있었다. 따라서, 본 연구에서 도출한 관계식들이 유효함을 확인할 수 있었다.계식들이 유효함을 확인할 수 있었다.할 때 약간의 증가를 나타냈다.". And

• Journal of Broadcast Engineering
• /
• v.14 no.2
• /
• pp.144-153
• /
• 2009

Recently, as the necessity of a light-weighted video encoding technique has been rising for applications such as UCC(User Created Contents) or Multiview Video, Distributed Video Coding(DVC) where a decoder, not an encoder, performs the motion estimation/compensation taking most of computational complexity has been vigorously investigated. Wyner-Ziv coding reconstructs an image by eliminating the noise on side information which is decoder-side prediction of original image using channel code. Generally the side information of Wyner-Ziv coding is generated by using frame interpolation between key frames. The channel code such as Turbo code or LDPC code which shows a performance close to the Shannon's limit is employed. The noise model of Wyner-Ziv coding for channel decoding is called Virtual Channel Noise and is generally modeled by Laplacian or Gaussian distribution. In this paper, we propose a Wyner-Ziv coding method based on the frequency-adaptive channel noise modeling in transform domain. The experimental results with various sequences prove that the proposed method makes the channel noise model more accurate compared to the conventional scheme, resulting in improvement of the rate-distortion performance by up to 0.52dB.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.37 no.1
• /
• pp.55-63
• /
• 2000

This paper investigated the sub-region compression effect of the three dimensional DCT(3D-DCT) using the difference component(DC) of inter-frame in images. The proposed algorithm are the method that obtain compression effect to divide the information into subband after 3D-DCT, the data appear the type of cubic block(8${\times}$8${\times}$8) in eight difference components per unit. In the frequence domain that transform the eight differential component frames into eight DCT frames with components of both spatial and temporal frequencies of inter-frame, the image data are divided into frame component(8${\times}$8 block) of time-axis direction into 4${\times}$4 sub block in order to effectively obtain compression data because image components are concentrate in corner region with low-frequency of cubic block. Here, using the weight of sub block, we progressed compression ratio as consider to adaptive sub-region of low frequency part. In simulation, we estimated compression ratio, reconstructed image resolution(PSNR) with the simpler image and the complex image contained the higher frequency component. In the result, we could obtain the high compression effect of 30.36dB(average value in the complex-image) and 34.75dB(average value in the simple-image) in compression range of 0.04~0.05bpp.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.335-342
• /
• 2016

This paper proposes efficient hardware structure of in-loop filter for a high-performance HEVC (High Efficiency Video Coding) encoder. HEVC uses in-loop filter consisting of deblocking filter and SAO (Sample Adaptive Offset) to improve the picture quality in a reconstructed image due to a quantization error. However, in-loop filter causes an increase in complexity due to the additional encoder and decoder operations. A proposed in-loop filter is implemented as a three-stage pipeline to perform the deblocking filtering and SAO operation with a reduced number of cycles. The proposed deblocking filter is also implemented as a six-stage pipeline to improve efficiency and performs a new filtering order for efficient memory architecture. The proposed SAO processes six pixels parallelly at a time to reduce execution cycles. The proposed in-loop filter encoder architecture is designed by Verilog HDL, and implemented by 131K logic gates in TSMC $0.13{\mu}m$ process. At 164MHz, the proposed in-loop filter encoder can support 4K Ultra HD video encoding at 60fps in real time.