• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.173.1-173.1
• /
• 2012

천리안 위성 원격측정명령계 RF부는 위성 장착 이후 발사 전까지 여러 단계의 위성체레벨 기능시험을 거치며 요구 성능을 만족하는지를 충분히 확인하였다. 위성 발사후부터 정상궤도 진입 후에 발사전 원격측정명령계 RF가 원하는 요구 기능 및 성능을 만족하고 있는지를 확인하는 궤도운용시험이 수행되었다. 본 논문은 원격측정명령계 RF부의 궤도운용시험 계획에 따라 수행하여 얻어진 시험 결과에 대한 분석에 대한 것이다. 먼저 발사 후 LEOP 동안 원격명령이 정상적으로 수신되고 수행되는지 확인하였다. 그 이후 원격명령이 언락되는 수신 파워 임계(Threshold) 입력 레벨 확인을 확인하였으며 원격측정 다운링크 주파수 변이가 요구범위에 있는지 확인하였으며, 수신신호 스펙트럼 측정을 통해 TM EIRP를 추정한 결과 링크 버짓 마진 대비 추가적인 마진이 있음을 확인하였으며 또한 TM 송신 신호 변조지수가 추정범위 안에 있는지를 확인하였다. 그리고 레인징 시험을 통해 수신기 및 레인징 기능이 정상적으로 동작하고 있음을 확인하였다. 이 궤도운용시험 결과는 후속 정지궤도복합위성 원격측정명령계 RF부 궤도운용시험을 위한 비교 자료로 활용될 것이다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1C
• /
• pp.123-129
• /
• 2010

In this paper, we analyze the code tracking biases of single and double early-minus-late processing schemes which are widely used code tracking method for global navigation satellite systems. The code tracking bias which results from the distortion in symmetry of correlation values is arisen in the presence of multipath signals. To analyze them, two civil signals which are spreading signals modulated by binary phase shift keying and binary offset carrier are considered.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.1057-1060
• /
• 2005

Noises from circuits components and interference with other circuits components generate the phase noise in voltage controlled oscillators (VCO). The effects of the random noise on the phase noise is depending on the instant when the noise enters the VCO. When the noise enters at the transition time of the output of VCO, the effect is most prominent. Using this time variable system, it is revealed that the power spectral density of phase noise of VCO is made of the integrated noise powers of frequency components slightly offset from the fundamental and harmonic frequencies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5A
• /
• pp.305-310
• /
• 2012

This paper proposes a selection combined hybrid sequential deconvolution and single carrier modulation with a zero forcing frequency domain equalizer for single carrier transmission system in order to enhance performance. Selection combining method is an algorithm of antenna space diversities, the receiver can choose the best channel environment only with the increase of the number of antennas, but a baseband structure is the same as the traditional receiver architecture. Simulation results show that the proposed algorithm has a better performance rather than the traditional single carrier transmission with a frequency domain equalizer.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.12
• /
• pp.622-626
• /
• 2001

HID(high intensity discharge)lamps are high pressure mercury lamp, high pressure sodium lamp and metalhalide lamp. metalhalide lamp among these lamps has considered to be one of the most effective artificial light sources and this lamp has good efficiency, good color rendition and good focusing capability, But the shortcorning of metalhalide lamp is known as acoustic resonance phenomena in the discharge tube when lighted by electronic ballast and then acoustic resonance cause various problems such as the arc instability, light output fluctuations. In this paper, to reduce the acoustic resonence phenomena, the electronic ballast was designed by three methods for high frequency operation wish frequency-modulated sinusodial waves in acoustic resonance frequency band. These frequency-modulated methods are resonance frequency and resonance frequency, resonance frequency and non-resonance frequency non-resonance frequency and non-resonance frequency Experiment results could't show the Presence of acoustic resonance visually and it proved that the resonance-generating conditions can be avoided by continuously changing the two operating frequencies in acoustic resonance band (20.59kHz∼94.2kHz).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.565-568
• /
• 2006

In the luminance and chrominance signal, luminance signal creates gray images, and is capable of making each color component compatible with monochrome system. And color components of luminance and chrominance signals are useful to encode or convert the signal because they have low correlation. Each color signal has low correlation statistically, but they are not independent of one another. Therefore, this paper proposes the watermark inserting algorithm for luminance and chrominance signal in the domain of frequency founded on wavelet, considering the interdependent characteristics of color components. Therefore, it can guarantee the robustness and invisible of digital watermark.

• Journal of Advanced Navigation Technology
• /
• v.10 no.3
• /
• pp.268-275
• /
• 2006

The rapid proliferation of in-home and office information applications and services is driving the need for new wireless technologies enabling wideband short range multimedia communications. Due to the growing demand for higher quality media and faster wireless connections, several IEEE standardization groups are considering very high data rate alternatives physical layer(s) for Wireless Personal Area Network (WPAN). The Ultra Wide Band (UWB) multiple access technology based on very narrow pulse transmission, is one viable candidate for these applications providing very high bit rates services, low power consumption and accurate positioning capability. In this paper we provide a methodology to evaluate the UWB system BER performance in UWB wireless fading networks with power controlled UWB devices are considered. Results can be used to analyze the performance of a given network topology and to provide useful design ideas for an UWB home sensor network.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.4
• /
• pp.76-85
• /
• 2008

In this paper, a 800 MHz 1 W cartesian feedback linearized power amplifier is designed and fabricated for TETRA handset application. For amplification of TETRA signal with 200 kHz narrow bandwidth, amplifier linearization performance of more than 30 dBc is improved through the cartesian feedback linearizer at the offset Sequency of ${\pm}25$ kHz. It is clear that the linearization performance is affected by imbalance of gain and phase between I/Q signals and also DC offset. The linearization performance can be maximized by the compensation of those influences. Cartesian feedback is suitable for a liearization technique of narrow band signal with QAM and another modulation signals, as well.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.5
• /
• pp.912-920
• /
• 2008

OFDM (Orthogonal Frequency Division Multiplexing) system is robust to frequency selective fading and narrowband interference in high-speed data communications. However, an OFDM signal consists of a number of independently modulated subcarriers, which can give a large PAPR (Peak-to-Average Power Ratio) when added up coherently. In this paper, we apply clipping and filtering to solve the PAPR problem and compensate the inband compensation using calculated EVM (Error Vector Magnitude). The proposed method can reduce the PAPR and inband distortion. From the results, we analyze the PAPR reducing efficiency and EVM, BER performance of proposed algorithm in the wireless communication system.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.4
• /
• pp.77-84
• /
• 2011

Tire manufactures have dealt with noise problem by varying the pitch of the tread. The various formulas for the variations are generally determined differently, however. Often these variations are based on a combination of trial and error, intuition, and economics. Some manufactures have models and analogs to test tread patterns and their variations. These efforts, however practical, do not determine the best variation beforehand or guarantee the best results. For this reason it was felt that a general mathematical approach for determining the best variation was needed. Moreover, the method should be completely general, easy to use, and sufficiently accurate. This paper discusses a mathematical method called Mechanical Frequency Modulation(MFM) which meets the above requirements. Thus, MFM pertains to computing an irregular time sequence of events so that the resulting excitation spectrum is shaped to a preferred form. The first part of this paper treats the theoretical basis for computing an optimum variation ; the second part discusses experimental results and simulation program which corroborate the theory.