• Title/Summary/Keyword: 주파수 변조

Search Result 1,057, Processing Time 0.036 seconds

Symbol Based Rate Adaptation in Coded MIMO-OFDM Systems (심볼 기반의 적응 변조 기법을 이용한 채널 부호화된 MIMO-OFDM 시스템)

  • Sung, Chang-Kyung;Kim, Ji-Hoon;Lee, In-Kyu
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.33 no.1A
    • /
    • pp.50-58
    • /
    • 2008
  • The use of space-division multiple access(SDMA) in the downlink of multiuser multi-input/multi-output(MIMO) wireless transmission systems can provide substantial gains in system throughput. When the channel state information(CSI) is available at the transmitter, a considerable performance improvement can be attained by adapting the transmission rates to the reported CSI. In addition, to combat frequency selective fadings in wideband wireless channels, bit-interleaved coded OFDM(BIC-OFDM) modulation schemes are employed to provide reliable packet delivery by utilizing frequency diversity through channel coding. In this paper, we propose an adaptive modulation and coding(AMC) scheme combined with an opportunistic scheduling technique for the MIMO BIC-OFDM with bandwidth-limited feedback channels. The proposed scheme enhances the link performance by exploiting both the frequency diversity and the multiuser diversity. To reduce the feedback information, the proposed AMC scheme employs rate adaptation methods based on an OFDM symbol rather than on the whole subchannels. Simulation results show that the proposed scheme exhibits a substantial performance gain with a reasonable complexity over single antenna systems.

A study on the digital carrier recovery loop with adaptive loop bandwidth (적응 루프 대역폭을 가진 디지털 반송파 동기 루프에 관한 연구)

  • 한동석
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.22 no.8
    • /
    • pp.1774-1781
    • /
    • 1997
  • In this paper, we propose a full digital frequency and phase locked loop for CATV and HDTV receivers adopting VSB modulation. The CATV and HDTV receivers proposed by the Grand-Alliance in USA are ultilizing analog signal processing technology for carrier recovery. By the way, it is not a good architecture for the development of single chip ASIC operating in digital domain. To solve this problem while improving the performance, we first down convert the received r.f. signal to a near baseband signal for a low-rate AD converter and then we use digital signal processing techniques. The proposed system has the frequency pull-in range of -200 KHz +2.50 KHz. Moreover, it has the ability of adaptive loop bandwidth control according to the amount of frequency offset to improve the acquisition time while reducing the phase noise.

  • PDF

Optical encryption system using random divided image and joint transform correlator (무작위 분할 영상과 결합변환 광 상관기를 이용한 암호화 시스템)

  • 최상규;서동환;신창목;김수중;배장근
    • Korean Journal of Optics and Photonics
    • /
    • v.14 no.6
    • /
    • pp.636-642
    • /
    • 2003
  • We proposed the optical system using two divided halftone images to hide the original image and a joint transform correlator. The encryption procedure is performed by the Fourier transform of the product of each divided image by visual cryptography and the same random image which is generated by computer processing. As a result, we can obtain two Fourier divided images which are used as the encrypted image and the decrypting key, respectively. In the decryption procedure, both the encrypted image and the decrypting key are located on the joint input plane. Then the original image is reconstructed on a CCD camera which is located in the output plane. An autocorrelation term of joint transform correlator contributes to decrypt the original image. To demonstrate the efficiency of the proposed system, computer simulations and noise analysis are performed. The result show that the proposed system is a very useful optical certification system.

Performance Analysis on Speed Quality of LTE-Maritime Considering Scenario of e-Navigation Service and the Modulation Coding Scheme(MCS) (이내비게이션 서비스 시나리오 및 변조코딩방식(MCS)을 고려한 초고속해상무선통신망(LTE-Maritime)의 전송속도 성능 분석)

  • Kim, Bu-Young;Shim, Woo-Seong
    • Journal of Navigation and Port Research
    • /
    • v.45 no.6
    • /
    • pp.360-365
    • /
    • 2021
  • LTE-maritime, which was built as part of the Korean e-Navigation project, has been providing a service that meets the goal of establishing a network up to 100km from the coast since J anuary 31, 2021. To provide appropriate communication services for LTE-maritime from the perspective of real users, additional performance analysis of LTE-maritime is required considering service implementation, and efficient use of spectrum resources. This paper presents the requirement of transmission speed according to the e-Navigation service scenario, and available transmission speed based on LTE modulation coding scheme (MCS) according to sea-specific ship distribution scenario and frequency resource allocation, and is cross-analyzed with results of the sea test.

Design and Fabrication of a High-Power Pulsed TWTA for Millimeter-Wave(Ka-Band) Multi-Mode Seeker (밀리미터파(Ka 밴드) 복합모드 탐색기용 고출력 펄스형 진행파관 증폭기(TWTA) 설계 및 제작)

  • Song, Sung-Chan;Kim, Sun-Ki;Lee, Sung-Wook;Min, Seong-Ki
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.30 no.4
    • /
    • pp.307-313
    • /
    • 2019
  • The traveling wave tube amplifier (TWTA), which can be applied to the Ka-band millimeter-wave multi-mode seeker, consists of an high voltage power supply(HVPS), a grid modulator, a command and control, and an RF assembly. We designed a power supply that generates a -17.9 kV high voltage by synchronizing the pulse repetition frequency(PRF) and power supply switching frequency(i.e. synchronization frequency), and a high-speed grid-switching modulator for RF pulse modulation. The TWTA, which is fabricated through miniaturization with a volume of 3.18 L, has high pulse switching characteristics of up to 18.5 ns. The maximum rise/fall time of the grid on/bias signal and peak power is more than 564.9 W. Moreover, an excellent spurious performance of -68.4 dBc or less was confirmed within the range of PRF and PRF/2.

Autoencoder-based signal modulation and demodulation method for sonobuoy signal transmission and reception (소노부이 신호 송수신을 위한 오토인코더 기반 신호 변복조 기법)

  • Park, Jinuk;Seok, Jongwon;Hong, Jungpyo
    • The Journal of the Acoustical Society of Korea
    • /
    • v.41 no.4
    • /
    • pp.461-467
    • /
    • 2022
  • Sonobuoy is a disposable device that collects underwater acoustic information and is designed to transmit signals collected in a particular area to nearby aircraft or ships and sink to the seabed upon completion of its mission. In a conventional sonobouy signal transmission and reception system, collected signals are modulated and transmitted using techniques such as frequency division modulation or Gaussian frequency shift keying, and received and demodulated by an aircraft or a ship. However, this method has the disadvantage of the large amount of information to be transmitted and low security due to relatively simple modulation and demodulation methods. Therefore, in this paper, we propose a method that uses an autoencoder to encode a transmission signal into a low-dimensional latent vector to transmit the latent vector to an aircraft or ship and decode the received latent vector to improve signal security and to reduce the amount of transmission information by approximately a factor of a hundred compared to the conventional method. As a result of confirming the sample spectrogram reconstructed by the proposed method through simulation, it was confirmed that the original signal could be restored from a low-dimensional latent vector.

Growth characteristic of lettuce (Lactuca sativa L.) based on Pulse Width modulation of artificial light sources with UV-A. (UV광원을 포함한 인공광원의 펄스폭 변조에 따른 적치마 상추의 생육특성)

  • Kwak, Su-Ji;Kwak, Eun-Ji;Lee, Hyun-Hee;Lee, Seung-Ki;Han, Jae-Woong;Jeon, Myung-Jin;Kim, Woong
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 2017.04a
    • /
    • pp.123-123
    • /
    • 2017
  • 식물공장 내 작물의 생육은 제공되는 인공광원의 광원 및 광질에 영향을 받으며, 광흡수 파장에 따라 다르다. 또한 광합성에 효과적인 형태의 빛의 계속적인 빛의 조사보다는 광 펄스를 조절하여 공급하여 준다면 더욱더 효과적인 생육 환경을 제공해 줄 수 있다. 식물의 최적 생장을 위해 특정 파장대의 빛을 선택적으로 조사할 수 있는 LED특성을 사용하여 UV광원을 포함한 인공광원의 펄스폭 변조에 따른 적치마 상추의 생육특성을 알아보고자 하였다. 광환경은 Red(660 nm), Blue(450 nm), UV(395 nm) LED를 8:1:1 비율로 광량 $160{\mu}mol{\cdot}m^2{\cdot}s^{-1}$, 주파수 1.25, 2.5, 3.75, 5.0 kHz로 조사하여 주었으며, 온도 $20{\sim}23^{\circ}C$, 습도 50~60%, $CO_2$농도 1,000 ppm으로 조성하여 주었다. 아시아종묘 적치마상추를 파종 후 18일 째 되는날 정식, 정식 후 14일 28일 째 되는날 SPAD, 지상부 지하부의 생체중 및 건물중, 엽폭, 엽장을 측정하였으며, 측정한 엽폭과 엽장을 이용하여 엽형지수 산출, 지상부 지하부 생체중 값을 이용하여 S/R율을 산출하였다. SPAD 측정결과 생육시기가 증가할수록 SPAD함량은 감소하였으며, 1.25와 2.5 kHz에서 생육 시기 증가에 대한 SPAD함량 감소가 컸고, 3.75와 5.0 kHz의 경우 SPAD함량의 감소량은 작았다. 지상부 생체중은 3.75 kHz에서 121.51 g으로 가장 높은 값을 나타냈으며, 2.5, 1.75, 5.0 kHz 순으로 높은 값을 나타났다. 지하부 생체중의 경우 3.75 kHz에서 31.31 g으로 가장 높은 값을 나타냈으며 2.5, 5.0, 1.25 kHz 순으로 높게 나타났다. 엽형지수는 생육 시기가 증가에 따라 감소하는 것으로 나타났으며, 1.75, 2.5, 5.0, 3.75 kHz 순으로 크게 나타났다. 지상부 건물중 측정결과는 지상부 생체중 결과와, 지하부 건물중의 측정결과는 지하부 생체중 결과와 동일하였다. S/R율은 1.75 kHz를 제외하고 생육시기가 증가할수록 S/R율은 감소하는 것으로 나타났으며, 주파수가 높아질수록 S/R율은 감소하는 것으로 나타났다. 엽형지수는 엽폭/엽장으로 엽형지수를 산출한 결과로 값이 작을수록 엽폭이 넓은 형태를 의미하며, 생체중값이 가장 크게 나타났던 3.75 kHz에서 엽형지수의 값이 가장 낮게 나타났으며 3.75 kHz를 제외하고 주파수가 높을수록 엽형지수의 값이 낮게 나타났다. 이에 주파수에 따른 적상추의 생육은 3.75 kHz에서 가장 좋은 것으로 판단할 수 있었다.

  • PDF

A Study on Signal Processing of Rear Radars for Intelligent Automobile (지능형 차량을 위한 후방 감시용 레이더 신호 처리 기법에 관한 연구)

  • Choi, Gak-Gyu;Han, Seung-Ku;Kim, Hyo-Tae;Kim, Kyung-Tae
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.22 no.11
    • /
    • pp.1070-1077
    • /
    • 2011
  • This paper introduces a radar signal processing technique for intelligent rear view monitoring of an automobile. The linear frequency modulation-frequency shift keying(LFM-FSK) waveform, which is the combination of frequency modulation continuous wave(FMCW) and frequency shift keying(FSK) waveform, is employed to simultaneously estimate the range, relative aspect angle, and velocity of an automobile. Hence, it can be applied to monitor the rear view of an automobile. FMCW waveform has high range resolution capability, but it produces ghost targets under a multiple target environment. In contrast, FSK waveform can provide high velocity resolution and avoids the problem of ghost targets. However, it fails to identify multiple targets along the radar's line of sight. With LFM-FSK waveform, we can estimate the ranges and velocities of multiple targets with very high resolution, which avoids the ghost target problem of an FMCW waveform. Simulation result shows that LFM-FSK wavefrom is suitable for use in the lane change assistance system for an automobile.

Phase Tracking for Orthogonal Frequency Division Multiplexing Systems (직교 주파수 분할 다중화 시스템을 위한 위상 오차 추적)

  • Jeon, Tae-Hyun
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.43 no.12 s.354
    • /
    • pp.61-67
    • /
    • 2006
  • This paper proposes the algorithm for tracking of the residual phase errors incurred by carrier frequency offset and sampling frequency offset in the orthogonal frequency division multiplexing (OFDM) systems which are suitable for high data rate wireless communications. In the OFDM systems the subcarriers which are orthogonal to each other are modulated by digital data and transmitted simultaneously. The carrier frequency offset causes degradation of signal to noise ratio(SNR) performance and interference between the adjacent subcarriers. The errors in the sampling timing caused by the sampling frequency difference between the transmitter and the receiver sides also cause a major performance degradation in the OFDM systems. The residual error tracking and compensation mechanism is essential in the OFDM system since the carrier and the sampling frequency offset cause the loss of orthogonality resulting in the system performance loss. This paper proposes the scheme where the channel gain and the payload data information are reflected in the residual error tracking process which results in the reduction of the estimation error and the tracking performance improvements under the frequency selective fading wireless channels.

A Study on the Characteristics of Frequency Response Functions for Rotor System with Anisotropic Stator and Asymmetric Rotor (비등방 정지부 및 비대칭 회전부를 갖는 회전체의 주파수응답함수 특성에 관한 연구)

  • Han, Dong-Ju
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.33 no.10
    • /
    • pp.42-50
    • /
    • 2005
  • Based upon the derived analytical model and equation of motion for the general rotor system with anisotropic stator and asymmetric rotor treated as a periodically time-varying system, the series of equations are structured by associating with the time modulated coefficients. The frequency response functions (FRFs) expressed by physical parameters are derived in such a convenient way from the direct inverse matrices of the Fourier transformation of those series of equations, from which the characteristics are analyzed and the properties are suggested.