• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.5
• /
• pp.482-485
• /
• 2016

In this work, a transcranial magnetic stimulation(TMS) experiment on animals is performed to stimulate the brain cortex of the mouse using modulated signals. The proposed TMS system is composed of the inverter, transformer, capacitor, variable inductor, and stimulation coil to generate 1.5 mT magnetic field in the brain cortex of the mouse. The stimulation signal is modulated to square wave where the carrier frequency is swept from 85 to 91 kHz to investigate the stimulation effect. The experimental result shows that when the carrier frequency of the stimulation signal is lower than 89 kHz, the reaction of the mouse does not change while the stimulation signal which has the carrier frequency higher than 89 kHz results in decreasing the threshold of the stimulus for the pressure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2C
• /
• pp.203-209
• /
• 2010

In this paper, we propose a new selected mapping (SLM) scheme for reducing peak to average power ratio (PAPR) of orthogonal frequency division multiplexing (OFDM) signals modulated with quadrature amplitude modulation (QAM), called amplitude and phase variant SLM (APSLM). Contrary to the conventional SLM which rotates the phases of QAM symbols in the frequency domain, the proposed scheme changes the magnitudes as well as the phases of QAM symbols by applying binary sequences to the binary data sequence before mapped to QAM symbols. Simulation results show that the proposed scheme has better PAPR reduction performance than the conventional SLM scheme for the QAM modulated OFDM signals, especially for the small number of subcarriers.

• Korean Journal of Optics and Photonics
• /
• v.18 no.1
• /
• pp.56-65
• /
• 2007

The effect of gain dispersion on the self-pulsation (SP) characteristics due to the mode beating of two modes emitted in a multisection DFB laser composed of two complex-coupled DFB sections and a phase control section is investigated. When the peak wavelength, ${\lambda}_{p}$, of the gain spectrum of the DFB section is positioned in the center of the lasing wavelengths or the Bragg wavelengths of the two DFB sections, the maximum SP frequencies are higher and the modulation index has better characteristics compared to those cases for ${\lambda}_{p}$ fixed at the lasing wavelength or Bragg wavelength of one DFB section, when the difference between the Bragg wavelengths of the two DFB sections, ${\Dalta}{\lambda}_{B}$, is varied. When ${\lambda}_{p}$ is positioned in the renter of the Bragg wavelengths of the two DFB sections, the maximum SP frequency is higher and of the modulation index has better characteristics compared to those of the case for ${\lambda}_{p}$ positioned in the center of the lasing wavelengths of the two DFB sections.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.4
• /
• pp.542-551
• /
• 1998

In this study, a method of error compensation for channel gain imbalance, phase imbalance and local oscillator leakage in the modulator of frequency direct conversion is suggested. The compensation of channel imbalance can be carried out by using the received power after transmitting test signal. By applying this method, the phase imbalance conversion with frequency can be easily compensated since this method is rarely affected by the transmission channel. It is confirmed that the algorithm proposed in this study(iteration coefficient=11) converges faster than conventional algorithm(iteration coefficient=43). From the numerical results, the DC-offset, channel gain, phase imbalance compensation coefficient and iteration number converges into($f_1$=0.0199999, $f_2$=-0.050001, $C_{22}$=0.9133, $C_{12}$=-0.0524, N=13) when the local oscillator leakage is not considered. However, it converges into($f_1$=-0.02, $f_2$=-2.2476, $C_{22}$=0.9133, $C_{12}$=-0.0524, N=16) when the local oscillator leakage is considered.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.6 s.360
• /
• pp.64-70
• /
• 2007

This paper presents a novel unified DC offset cancellation and I/Q regeneration for five-port junction based direct receivers. It utilizes the symmetry characteristics of the single-frequency continuous-wave (CW) signal, making it possible that the proposed method can be used regardless of carrier phase offset. The proposed method eliminates the additional DC offset cancellation and reduces the I/Q regeneration parameter estimation time. Since the proposed method employs a single-frequency CW signal independent of the modulation scheme, five-port junction based direct receivers can be used for the demodulation of orthogonal frequency-division multiplexing and continuous phase modulation as well as phase shift-keying.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.3
• /
• pp.173-179
• /
• 1999

The defects on the metal surface. such as the ended circular pressed hole. the penetrated circular drilled hole, and the linear hollow lanes have been investigated by means of the microwave. In this experiment, frequency was set at 9.2GHz with 3kHz modulation, and the methods of reflection, transmission, fixed carrier frequency, and mod-demodulated technique have been used for investigating defects. The magnitudes of the microwave signals have been changed at the ended circular pressed hole and the penetrated circular drilled hole. The defect sizes that were estimated from the reflected microwave signals had the dimensions enlarged by twice the original size of the penetrated circular drilled hole and 2.5 times the original size of the ended circular pressed hole. The magnitudes of the reflected microwave signals from the linear hollow lane have increased with expansion of the width of the notch. In the linear hollow lane with the depth of 2.4mm, the reflected microwave signals versus the defect widths had a maximum value at the defect width of 50mm, and in the linear hollow lanes with the depths of 1.2mm and 0.45mm, the reflected microwave signals versus the defects widths had the maximum values each at the defect depths of 55mm.

• Journal of IKEEE
• /
• v.17 no.3
• /
• pp.248-253
• /
• 2013

Frequency detector is a circuit that converts the frequency to a digital representation and finds its application in various fields such as modulator and synchronization circuitry. In this paper, a couple of first-order and second-order frequency discriminator structures are modeled and analyzed with their quantization noise sources. Also a delta-sigma frequency detector architecture is proposed. Through theoretical analysis and derived equations, the output noise is obtained, which is validated by simulation. The proposed all-digital frequency discriminator may be applied in the feedback path of the all-digital phase-locked loop.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.9
• /
• pp.107-114
• /
• 2004

This paper presents block and timing diagrams of the DWA(Data Weighted Averaging) to optimize a feedback time delay of the sigma-delta modulator. Through the MATLAB modeling, the optimized coefficients of the integrators are obtained to design the modulator. The fully differential SC integrators, feedback DAC, 9-level quantizer, and DWA are designed by considering the nonideal characteristics of the modulator. The designed third-order multibit modulator is fabricated in a 0.35${\mu}{\textrm}{m}$ CMOS process. The modulator achieves 75dB signal-to-noise ratio and 74dB dynamic range at 1.2Vp-p 825kHz input signal and 52.8MHE sampling frequency.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.10
• /
• pp.97-102
• /
• 2004

In this paper, a new predistorter controlling modified individual order jntermodulation distortion signals is proposed. The proposed predistorter generates and controls predistorted third and high order IM signals independently. Using predistorted signals, jntermodulation distortion signals of power amplifier are suppressed effectively. The predistortion linearizer has been implemented to operate in Korean PCS basestation transmitting band (1840～1870MHz). The test results show that IMD3 and IMD5 (C/I) of power amplifier are improved more than 40dB and 23dB for CW two tone signals, respectively. The predistorter improves the adjacent channel power ratio (ACPR) more than 10dB at 885KHz offset point for CDMA (IS-95) signals.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.4
• /
• pp.66-75
• /
• 2013

The spin modulation is proposed with modulating frequency and amplitude simultaeously, and realized with the array sturcture easily located due to the nanometer size of the spintronics oscillator. In this paper, the dual-channel receiver is deisgned for detecting the spin modulated signal. Resultly, we confirmed the dual-channel recevier well detected the data sent through the spintronics oscillator array, and processed up to 200 kbps on each channel. Distance is limited up to 1 cm due to the low level signal under -60 dBm. The realized dual-channel receiver has the size of $56{\times}33mm^2$.