• The Journal of Engineering Geology
• /
• v.22 no.4
• /
• pp.459-466
• /
• 2012

A difficulty encountered in engineering seismic mapping is that reflection events from shallow discontinuities are commonly overlapped with coherent noise such as air wave, direct waves, head waves, and high-amplitude surface waves. Here, the radial trace transform, a simple geometric re-mapping of a trace gather (x-t domain) to another trace gather (v-t domain), is applied to investigate the rejection effect of coherent linear noises. Two different types of data sets were selected as a representative database: good-quality data for intermediate sounding (hundreds of meters) in a sedimentary basin and very noisy data for shallow (${\leq}50m$) mapping of the weathered zone and bedrock surface. Results obtained with cascaded application of the radial transform and low-cut filtering proved to be as good as, or better than, those produced using f-k filtering, and were especially effective for air wave and direct wave. This simple transform enables better understanding of the characteristics of various types of noise in the RT domain, and can be generally applied to overcoming diffractions and back-scatterings caused by joints, fractures, and faults commonly that are encountered in geotechnical problems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.2
• /
• pp.168-175
• /
• 1987

In this paper, a FFH-SS hybrid communication method using digital frequency synthesizer is proposed. This can simultaneously share the same frequency band with conventional band limited communication method without interference. In the experiment the selective hopping pattern is attained by some conbination of serial to parallel conversion of maximal code from pseudo random noise generater, and it is observed that the selective hopping band transition can be more easily achieved when the hop interval is nonuniform than it is uniform. Digital frequency synthesizer is now reported to have very poor spurious suppression ability below 50~60dB, the reason of this is observed from the experimental result, and the way of how to solve this problem is presneted.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.699-702
• /
• 2012

본 논문에서는 WCDMA(Wide Code Division Multiple Access) 시스템 사양을 만족시키는 주파수 합성기 블록 중 위상잡음 및 전력소모의 최적 설계가 필요한 LC-VCO(voltage controlled oscillator)의 설계를 제안 하였다. 최적 설계를 위한 핵심내용은 LC-tank의 손실성분을 보상하는 MOS트랜지스터의 전달컨덕턴스와 인덕턴스 평면에 여유이득라인과 튜닝 범위 라인을 그어 설계 가능한 영역 내에서 위상잡음이 최소가 되는 인덕턴스 값을 구하고 선택하는 것이다. 제안한 최적 설계방법에 의해 진행된 LC-VCO의 시뮬레이션 결과 위상잡음 특성은 1MHz옵셋에서 -113dBc/Hz였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.8
• /
• pp.73-81
• /
• 2012

In this paper, a novel phase locked loop has been proposed using an analog band-selection loop. When the PLL is out-lock, the PLL has a fasting locking characteristic with the analog band-selection loop. When the PLL is near in-lock, the bandwidth becomes narrow with the fine loop. A frequency voltage converter is introduced to improve a stability and a phase noise performance. The proposed PLL has been designed based on a 1.8V $0.18{\mu}m$ CMOS process and proved by HSPICE simulation.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1997.11a
• /
• pp.9-13
• /
• 1997

본 논문에서는 two-ray 시간선택성 레일레이 페이딩 채널상에서 DPSK 신호를 차동검출 (differential detection)할 때 심볼에러율을 분석한다. 현재까지 수행된 많은 연구는 주파수 선택성 페이딩 채널 및 단일 경로 시간선택성 페이딩 채널을 대상으로 하였고, 다경로 시간선택성 페이딩 채널을 대상으로 한 예는 극히 드물다. 또한 다경로 시간선택성 페이딩 채널을 가장 간단히 모델링 할 수 있는 two-ray 페이딩 채널에 대한 연구도 지금까지 수행된 예가 극히 적다. 본 논문에서는 심볼열의 형태에 따라 수신신호들간의 관계를 세가지 그룹으로 나눈 후 각각의 경우에 대하여 위상 옵셋값을 계산하는 방식을 취하였다. 이와 같이 계산된 위상옵셋과 신호대 잡음비를 인자로 하여 차동검출된 신호가 가지는 위상의 확률밀도 함수를 계산하고 이 함수를 이용하여 심볼에러율을 계산하였다. 결과로부터 two-ray 페이딩 채널의 특성을 결정짓는 지연시간과 지연신호의 전력이 증가함에 따라 위상 옵셋값 및 에러율이 모두 증가하는 것을 확인하였다.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.60.1-60.1
• /
• 2010

한국우주전파관측망(Korean VLBI Network, KVN)을 이루는 21m 망원경의 수신기에는 전파세기를 모니터링하기 위한 장치가 있으나, 회로잡음, 이득, 그리고 DC offset 등의 개선을 위하여 전파세기 시험용 측정기를 설계하였다. 이 장치는 입력신호의 전압에 대하여 주파수로 출력되는데, 선형성과 신호잡음특성이 중요하다. 이러한 회로 특성 파악과 개선을 위하여, 차동입력 증폭, 단일입력 증폭, 그리고 1:1앰프출력 등으로 입력신호에 대하여 다양한 실험을 할 수 있게 하였고, 샘플링 주파수도 1 MHz와 4 MHz를 선택할 수 있게 전파세기 시험용 측정기를 설계하였다. 시제품을 제작하여 DC 입력 시험, 0 전압입력 시험, 노이즈 제너레이터를 이용한 동작 시험, 그리고 KVN연세전파천문대의 수신기에 직접 연결한 실험을 통하여, 최종 이득안정도의 잡음스펙트럼 ~1.5 X $10^{-4}\;dG/G(Hz^{-1/2})$@1Hz를 얻었다. 이번 실험 결과를 바탕으로 KVN의 전파세기측정기를 새로 제작할 예정이다. 이에 전파세기 시험용 측정기의 설계 결과를 소개하고자 한다.

• The Journal of the Korea Contents Association
• /
• v.13 no.8
• /
• pp.275-283
• /
• 2013

The patient radiation dose is different depending on selection of Ion chamber when taking Chest PA which using AEC. In this paper, we studied acquiring the best diagnostic images according to selection of Ion chamber on AEC mode as well as minimizing patient radiation dose. Experimental methods were selection of Ion chamber and change of sensitivity under the same conditions as Chest PA projection. At AEC mode, two upper ion chambers sensors and one lower ion chamber sensor were divided into 7 cases according to selection of on/off. after measuring five times respectively, we obtained average value and calculated exposure dose. Image assessment was done with measured Modulation Transfer Function, Peak Signal to Noise Ratio, Root Mean Square, Signal to Noise Ratio, Contrast to Noise Ratio, Mean to Standard deviation Ratio respectively. In exposure assessment results, selection of two upper chambers was the lowest. In resolution assessment results, image of two upper chambers had the second high spatial frequency at sensitivity at 625(High) was 1.343 lp/mm. RMS value of image selecting two upper chambers was low secondly. SNR, CNR, MSR were the high value secondly. As the sensitivity was increased, radiation dose was decreased but better image could be obtained on image quality. In order to obtain the best medical images while minimizing the dose, usage of two upper ion chambers is considered to be clinically useful at sensitivity 625(High).

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.8
• /
• pp.87-96
• /
• 2014

In this paper, we propose a directionally adaptive aliasing and noise removal using dictionary learning based on space-frequency analysis. The proposed aliasing and noise removal algorithm consists of two modules; i) aliasing and noise detection using dictionary learning and analysis of frequency characteristics from the combined wavelet-Fourier transform and ii) aliasing removal with suppressing noise based on the directional shrinkage in the detected regions. The proposed method can preserve the high-frequency details because aliasing and noise region is detected. Experimental results show that the proposed algorithm can efficiently reduce aliasing and noise while minimizing losses of high-frequency details and generation of artifacts comparing with the conventional methods. The proposed algorithm is suitable for various applications such as image resampling, super-resolution image, and robot vision.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.4
• /
• pp.17-24
• /
• 2014

In this paper, we propose a CMOS FM RX front-end structure with an automatic tunable input matching network and implement it using a 65nm CMOS technology. The proposed FM RX front-end is designed to change the resonance frequency of the input matching network at the low noise amplifier (LNA) according to the channel frequency selected by a phase-locked loop (PLL) for maintaining almost constant sensitivity level when an embedded antenna type with high frequency selectivity characteristic is used for FM receiver. The simulation results of implemented FM front-end show about 38dB of voltage gain, below 2.5dB of noise figure, and -15.5dBm of input referred intercept point (IIP3) respectively, while drawing only 3.5mA from 1.8V supply voltage including an LO buffer.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.398-402
• /
• 2003

In this paper, a VCDRO(Voltage Control Dielectric Resonator Oscillator) applied to FMCW(Frequency Modulated Continuous Wave)Radar as stable source is implemented and constructed with a MESFET for low noise, a dielectric resonator of high frequency selectivity, and high Q varator diode to obtain a good phase noise performance and stable sweep characteristics. The designed circuits is simulated thrash harmonic balance simulation technique to provide the optimum performance. The measured result of a fabricated VCDRO shows that output is 2.22dBm at 12.05GHz, harmonic suppression -30dBc, phase noise -130dBc at 100kHz offset, and sweep range of varator diode $\pm$18.7MHz, respectively. This oscillator will be available to FMCW Radar.