• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.402-403
• /
• 2018

70GHz-band high gain array antenna is developed for automotive short range radar sensor. In Short-rangeradar, the gain must be high in order to increase the resolution, and the angle width must be set to secure the field of view(Fov). The proposed antenna operates at 76~81GHz and satisfies angle width $60^{\circ}$, antenna gain 15dB and the input reflection coefficient of less than -10dB within the operating frequency. Wave guide WR-10 was used to measure the antenna and results similar to the simulation results were obtained.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.1
• /
• pp.42-49
• /
• 2015

The pressure oscillation induced by inhibitor in a solid rocket motor has been investigated by 3D large eddy simulation(LES) and proper orthogonal decomposition(POD). The vortex generation and breakdown at inhibitor are periodically observed between the inhibitor and the nozzle by flow-acoustic coupling mechanism. The excitation of pressure oscillation occurs as the flow impinges on the submerged nozzle head which recirculate in the cavity in rear dome of the motor chamber. The vortex generation frequency is closely related with the shedding frequencies of the detached vorticities at the inhibiter, which fairly compared with the experimental data.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.5
• /
• pp.419-425
• /
• 2017

This paper presents CMOS UWB RFIC based radar system for high speed target detection. The system can achieve resolution of 15 cm and detection range of 15 m. For developed system, single chip CMOS UWB IC is implemented. To reduce the measuring and processing time, envelope detection and equivalent time sampling technique are used. Measurement results show that the bandwidth and center frequency of UWB pulse can be adjusted in the range of 0.5 GHz~1.0 GHz, 3.5 GHz~4.5 GHz, respectively. Signal processing time including scan time over 15 m distance is about $150{\mu}sec$.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.2
• /
• pp.35-44
• /
• 1995

In this paper, the single E-plane structure which is inserted in the slot of waveguide tube for good yield has been proposed and analyzed by the variational method. A CAD program for designing of the narrow-band waveguide bandpass filters has been developed by the passband correction method with filter synthesis theory. Using the developed CAD program, 0.02dB equi-ripple Chebyshev type 5-section bandpass filter is designed at the center frequency of 3.82GHz, fabricated with tunable structure. The experimental results show good agreements with the theoretical results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1524-1534
• /
• 2009

In recent, diagnosing and monitoring technology via in vivo information has been evolved rapidly in worldwide with such capsule-kinds means of incorporating an RFID tag as wireless communication tool. Thus circumstance is pressing local body in Korea to research and develop ingestible RFID capsule which has more miniaturized form, less low power, harmless. This paper focused to investigate new technology and patents, R&D information for adopting proper frequency and designing wireless ingestible capsule antenna system, and suggested practical assignments to implement local R&D. Descriptions are consist of introduction, technology outline, tendency for R&D, patent, market, conclusion and suggestion.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.6
• /
• pp.1-6
• /
• 1984

This paper describes that the compensation of frequency dependent attenuation (F.D.A.) and faithful envelope detection using the analytic signal magnitude (A.S.M.) improve the range resolut ion in an acoustic medium. It is shown that a mean of computing the magnitude of. analytic signal is better than that of conventional A-mode. In addition, this proposed method is much easier than the above methods to detect two closely spaced interfaces on the A-mode. As the result of experiment, we obtained range resolution of 0.5 mm with transducer of 3.5 MHz. This method can be applied to medical experiment, diagonostic and nondestructive testing.

• Journal of the Korean Magnetics Society
• /
• v.11 no.2
• /
• pp.50-57
• /
• 2001

Magnetic inductive probe was designed and assembled for sensing the residual stress developed in the ferromagnetic thin sheet. The residual stress measurement system with this probe could resolve the residual stresses developed in the sheet in terms of principal stress orientation, and magnitude of the principal stress. It was consumed that the obtained probe output voltage from the qualified ferromagnetic Fe-42Ni lead frame sheet and quality-rejected sheet is effectively determined using the developed device. The lead frame sheet which has accumulated a high level of residual stress always showed a distinctive stress distribution and magnitude compared with those of qualified lead frame sheet. Those differences were well resolved as functions of input current or used frequency.

• Journal of the Korean Geophysical Society
• /
• v.5 no.2
• /
• pp.99-109
• /
• 2002

Among the geophysical exploration methods, electromagnetic method(EM) has the broadest range of instrumental systems and remarkable range of applications. There are a lot of available techniques and instruments which have different depth of investigation and resolution depending on the operating frequency and source-receiver configuration. Furthermore, it is very easy to apply on the engineering and environmental problems since modern EM equipments are remarkably portable, considering their sophistication. Even though electromagnetic theory is very complex and not easy to understand, rapid avances in recent computer technology have made it possible to conduct accurate forward modeling and inversion of various EM exploration data. Here, we are going to provide brief theoretical principles, survey techniques and case histories of some selected EM methods that can be applied to geotechnical and environmental problems in Korea.

• Geophysics and Geophysical Exploration
• /
• v.6 no.2
• /
• pp.101-107
• /
• 2003

3D seismic travel-time tomography algorithm baled on Fresnel volume was developed and its feasibility was investigated by the numerical experiments. To testify the field applicability of the developed algorithm, frequency characteristics and way coverage of the crossholel seismic raw data were investigated and 3D velocity tomogram cube with about 8m spatial resolution was obtained. When compared this 3D velocity cube with the conventional 2D ray tomogram, two results were matched well. We concluded that 3D seismic tomography algorithm developed in this study has enough potential to the field application.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.6
• /
• pp.531-538
• /
• 2016

In this paper, we design and fabricate a short range FMCW radar which detects and tracks a moving target in a two-dimensional domain using dual transceiver modules. For the short range radar, we propose a scheme for alternate extraction of the two-dimensional positions using one-dimensional range information from time division transceiver modules, and successfully apply the scheme to the two-dimensional short range radar. Measured results of the targets at 10 m and 30 m are presented as performance demonstration of each transceiver module. Also the performance of the two-dimensional radar is demonstrated using a two-dimensional target map, which uses the range bin corresponding to the frequency resolution, and the effectiveness of the proposed scheme is validated.