• Journal of Energy Engineering
• /
• v.4 no.1
• /
• pp.140-152
• /
• 1995

대부분의 기존 화력발전소는 기동정지가 빈번하지 않고 부하는 정상운전시에 일정하게 운전된다. 그러나, 최근에 원자력발전소 운전과 다양한 형태의 전력소비가 이루어지고 있어 발전소에 대한 효율적인 운전이 요구되어지고 있다. 따라서, 일일기동정지 및 주말기동정지 운전이 이루어지고 있으며, 발전소의 기동, 정지 및 부하변동이 자주 일어나며, 이러한 운전형태는 수처리시스템에 영향을 미치게 된다. P 화력발전소는 일일기동정지 운전개념으로 설계되었으며, 수처리설비중의 하나인 약품주입 제어시스템은 수질을 일정한 설정치로 유지시키지 못하였으며, 현장기술자가 PID 제어기 대신에 F(x) 함수를 갖는 제어시스템으로 설계변경하였으나 시험운전 결과는 만족스런 성능을 나타내지 않았다. 본 논문에서는 제어성능을 개선하기 위한 퍼지약품주입시스템을 제안하고 시뮬레이션으로 타당성을 입증하였다.

• Journal of Satellite, Information and Communications
• /
• v.10 no.4
• /
• pp.1-5
• /
• 2015

The ESD(electrostatic discharge) protection performance of PPS(PMOS pass structure) embedded N-type silicon controlled rectifier(NSCR_PPS) device with different partial p-well(PPW) structure was discussed for high voltage I/O applications. A conventional NSCR_PPS standard device shows typical SCR-like characteristics with low on-resistance, low snapback holding voltage and low thermal breakdown voltage, which may cause latch-up problem during normal operation. However, our proposed NSCR_PPS devices with modified PPW_PGM(primary gate middle) and optimal CPS(counter pocket source) implant demonstrate the stable ESD protection performance with high latch-up immunity.

• Journal of Satellite, Information and Communications
• /
• v.11 no.4
• /
• pp.21-26
• /
• 2016

The ESD(electrostatic discharge) protection performance of PPS(PMOS pass structure) embedded N-type silicon controlled rectifier(NSCR_PPS) device with different implant of channel blocking region was discussed for high voltage I/O applications. A conventional NSCR standard device shows low on-resistance, low snapback holding voltage and low thermal breakdown voltage, which may cause latch-up problem during normal operation. However, our proposed NSCR_PPS devices with modified channel blocking structure demonstrate the improved ESD protection performance as a function of channel implant variation. Therefore, the channel blocking implant was a important parameter. Since the modified device with CPS_PDr+HNF structure satisfied the design window, we confirmed the applicable possibility as a ESD protection device for high voltage operating microchips.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.504-504
• /
• 2013

유기발광소자는 차세대 디스플레이로 각광받으며 모바일 디스플레이에 이어 대형 디스플레이의 상용화 단계에 이르고 있다. 유기발광소자의 효율을 높이기 위해서는 여러 가지 구조에 대한 연구가 진행되고 있다. 하지만 유기물 내에서는 정공 이동도가 전자 이동도보다 빠르기 때문에 유기발광소자의 발광층에서 전자와 정공이 효율적으로 균형을 이루기 위하여 전자 주입효율 증진에 대한 연구가 필요하다. 본 연구에서는 녹색 유기발광소자의 전자 주입 효율을 향상 하여 소자의 발광 효율을 증진하는 발광효율 향상 메커니즘을 규명하였다. Cesium nitrate(CsNO3)와 lithium quinolate (Liq)를 다층 전자주입층으로 사용한 녹색 유기발광소자는 indiumtin-oxide 양극전극 위에 진공 증착 방법을 사용하여 유기발광소자를 제작하였다. 정공수송층으로 N,N'-di(1-naphthyl)-N,N'-diphenylbenzidine (NPB), 발광층으로 tris (8-hydroxyquinoline) (Alq3), 전자수송층으로 Alq3와 4,7-diphenyl-l-10-phenanthroline (BPhen), 전자주입층으로 CsNO3/Liq와 Liq, Al을 음극 전극으로 각각 사용하였다. CsNO3/Liq와 Liq를 전자주입층과 Alq3와 BPhen 전자 수송층으로 각각 사용한 녹색 유기발광소자의 전자 주입 성능을 비교 하여 발광 효율 향상 메커니즘을 규명하였다. CsNO3/Liq 전자주입층을 사용한 유기발광소자가 Liq 전자주입층을 사용한 유기발광소자보다 전극으로부터 전자 주입효율이 향상됨을 알 수 있었다. 전자주입효율 향상으로 발광층의 전자와 정공의 재결합을 증가하여 녹색 유기발광소자의 효율이 증진되었고 구동전압이 낮아졌다.

• Journal of Energy Engineering
• /
• v.14 no.1
• /
• pp.54-61
• /
• 2005

The APR1400 is an Advanced Pressurized Water Reactor with 3983 MWt power, 2×4 loops, and direct vessel injection system. The Fluidic Device (FD) is adopted to regulate the safety injection flow rate in a Safety Injection Tank (SIT) of APR1400. The performance of a newly designed fluidic Device is evaluated by analyzing a Large Break Loss-of-Coolant Accident (LBLOCA) using TRAC-M/F90, version 3.782. The analysis results show that the TRAC-M code reasonably predicts the important phenomena of blowdown, refill and reflood phases of LBLOCA. The sensitivity studies about gas/water volume changes in a SIT and K factor changes in a SI system were also done to understand the important phenomena with a Fluidic Device in APR1400.

• The Journal of Engineering Research
• /
• v.2 no.1
• /
• pp.151-164
• /
• 1997

We tried to improve the coating capability of the coating material using an additive(hexagonal crystalline graphite) of 2%, 3%, 4% and 6% under various pouring temperature for the easy isolation of sand and coating material from the final product. As a result in case of using a 2% and 3% additive to the Korean coating material generally no burning state has been occurred under the low pouring temperature, but it has been gradually increased with the pouring temperature, while in case of using a 2% and 3% additive to the Japanese coating material we could observe a strong burning state throughout the whole pouring temperature. On the other hand in case of using a 4% and 6% additive there has been no burning state through out the whole pouring temperature. From this result we could see that the best state of the final product without sand and coating material could generally be obtained if 4% and/or 6% of the crystalline graphite and the pouring temperature of $1400^{\circ}C$$\pm$$5^{\circ}C$ would be used.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.4
• /
• pp.57-65
• /
• 2013

The development of the oil refining industry has resulted in an annual 120 million tons of sulphur, which is a by-product of the desulphurization process. To exploit this abundance, the applications of sulphur must be expanded. as excellent durability of reuse of leftover sulphur which has high potential for utilization in construction materials, the study is actively in progress. Meanwhile, there has been active research on semi-rigid pavements that draw on the strengths and overcome the weaknesses of asphalt and concrete pavements. Acrylate is used to prevent cracking but involves a high cost, thus, an alternative material is required. As such, this study presents methods on the reuse of leftover sulphur and examines the engineering performance of grout containing sulfur polymer emulsion (SPE) for use in semi-rigid pavements. Our analysis shows that grout in which 30% of acrylate is replaced with SPE has superior properties in terms of time of flow and strength compared to regular grout. However, performance declined when more than 50% of acrylate was replaced by SPE, indicating that the optimum replacement level is 30%. Through SEM analysis, we found that grout with utra harding cement in this study at three hours had similar hydration properties to that of Type 1 Ordinary Portland Cement (OPC) at seven days, and maintained the properties regardless of grout containing SPE. OPC and grout with a replacement level of 30% displayed similar levels of chloride invasion resistance, whereas grout without SPE was far less resistant. Within the scope of this paper, the optimum replacement level of acrylate with SPE was found to be 30% in consideration of various properties such as time of flow, strength, and chloride invasion resistance.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.9
• /
• pp.5-16
• /
• 2022

In recent years due to the development of urban and underground space, the number of ground disasters is increasing, and it is also leading to social problems. To solve the problem, a grouting method is generally used. However, the grouting method has material (grout) limitations in permeability, gelation properties and tensile resistance. Therefore, research on grout materials mixed with fibers is actively carried out to improve the problems. However, in the actual ground injection process, many difficulties have been faced causing the blockage of the inlet port and the injection tube. In this study, 'CNT-mixed grout material' was developed using CNT powder that can reinforce the tensile strength of soils. The uniaxial compressive and tensile strength tests were performed to obtain the optimal content and mechanical properties of the CNT Powder-mixed grout. It was found that the optimal CNT powder content is 0.5% that gives the average maximum strength. A one-dimensional injection test and the bulb formation test were carried out, and it was identified that the injection rate and bulb form could be controlled by pressure and mixing ratio. Field application of the CNT-Mixed grout is simulated using numerical analysis of slopes, foundations, and tunnels reinforced in several types. The positive effect of reducing plastic ranges and settlements was confirmed.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.2
• /
• pp.75-82
• /
• 2014

Recently, public works becoming bigger in Jeju are implemented various kinds of ground reinforcement method including the chemical grouting method. In this study, we have been investigated on the proper material and the injection condition for the excellent injection effect and the excellent strength of injection material and the permanent waterproof and reinforcement through the experiment. The kind of injection material has been selected through the uniaxial compression test and the endurance test of injection material as the chamber test. An experiment was performed with model ground made of scoria, the injection performance of selected material has been identified through the evaluation test of injection range using the decision test of injection amount and the calibration chamber test. As a result of test, it has been analyzed that MSG appeared to have the excellent strength, durability and injection performance all compared with the ordinary cement, this result is judged to be possible as the ancillary data of design at time of design and construction with the chemical grouting method in the future.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.221-222
• /
• 2017

본 논문에서는 위치 센서에 의존하지 않는 매입형 영구자석 전동기의 센서리스 구동 시 전압 왜곡으로 인해 나타나는 위치 추정 오차를 이론적으로 분석하고자 한다. 특히, 추정 d축에 맥동하는 구형파 전압을 주입하는 방법에서 주입하는 신호의 주파수에 따라 위치 추정 성능이 달라지는 현상에 초점을 맞춘다. 무부하에서 스위칭 주파수의 신호를 주입할 때 전압 왜곡은 on/off sequence에서 서로 반대의 위상을 갖는 역상분 2고조파의 형태로 나타나며, 위치 추정 오차는 3고조파의 형태로 나타난다. 반면, 반스위칭 주파수의 신호를 주입하는 경우에는 샘플링 주기 동안 주입 전압 왜곡의 효과가 상쇄되기 때문에 인덕턴스의 영향만이 주로 고려되어 위치 추정 오차가 6고조파의 형태로 나타난다. 시뮬레이션과 실험을 통해 이론적 분석의 타당성을 검증하였다.