• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.661-662
• /
• 2015

최근 친환경적인 기술 개발에 대한 요구가 증가함에 따라 기존 엔진의 역할을 직접적으로 대체하게 되는 전기자동차용 전동기에 대한 연구가 활발히 진행되고 있다. 영구자석을 사용한 전동기의 경우, 계자 권선이 없기 때문에 회전자 동손이 없어지면서 효율이 높아지는 장점이 있지만 온도 상승 및 과부하 등으로 인한 영구자석의 불가역 감자로 인한 고장 가능성이 존재한다. 본 논문에서는 이러한 영구자석 감자현상을 진단하기 위한 방법 중 하나로 회전자 구속 조건에서 저전압 고주파 주입을 통한 입력전류 파형의 스펙트럼 분석을 제안한다. 제안한 방법은 전동기의 회전자를 구속시킨 상태에서 진단신호를 입력하고 인버터의 출력전류 파형을 측정하여 스펙트럼 분석을 수행하는 방법이다. 제안한 방법은 시뮬레이션을 통해 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.546-550
• /
• 2002

본 논문에서는 다이오드 정류기에 단상인버터와 변압기를 이용하여 영상고조파 전류를 주입함으로서 순수한 정현파 입력전류를 얻을 수 있는 새로운 방식의 고조파 저감기술을 제안한다. 본 방식은 주 전력의 흐름에 직렬로 스위칭소자가 연결되지 않아 전력손실이 적으며 보조회로로서 사용된 변압기의 턴비를 조정하면 인버터 스위치의 전류정격을 작게 구현할 수 있다. 본 방식의 타당성을 실험을 통하여 입증하였다.

• Nuclear Engineering and Technology
• /
• v.8 no.1
• /
• pp.29-40
• /
• 1976

An investigation on the effect of electrostatic drift field which can bring an additional aid to the photogenerated carrier collection in one side of the silicon solar cell has been carried out. The drift field was produced by the gradient of boron concentration in the p-type side in virtue of the strain compensation due to the tin dopant. A new method of ion implantation which is based on the principle of chiefly radiation-enhanced diffusion is adopted for forming the p-n junction in the solar cell. The open circuit voltage and the conversion efficiency of the ion-implanted silicon solar cell sample can be figured out to be 0.44 V and 5%, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1996.06a
• /
• pp.156-156
• /
• 1996

• Proceedings of the Korean Vacuum Society Conference
• /
• 1996.02a
• /
• pp.42-42
• /
• 1996

• Proceedings of the Korean Vacuum Society Conference
• /
• 2003.02a
• /
• pp.87-87
• /
• 2003

• Proceedings of the KSEEG Conference
• /
• 2007.04a
• /
• pp.444-446
• /
• 2007

• Proceedings of the Korean Vacuum Society Conference
• /
• 2005.08a
• /
• pp.189-190
• /
• 2005

• Journal of the Korean Chemical Society
• /
• v.41 no.5
• /
• pp.256-265
• /
• 1997

A rapid and sequential method was studied, which can determine nitrite, nitrate and ammonium ion in soil or water samples with flow injection analysis. Geometric factors including injection volume, length of the reaction coil and flow rate of carrier solution were investigated prior to sample measurement. Nitrite was determined at 540 nm by Griess reaction producing azo dye between N-(1-naphthylethylenediamine dihydrochloride) and sulfanilamide. Nitrate was also measured under the help of reduction mechanism toward nitrite with hydrazine. Ammonium was analyzed at 440 nm with Nessler's reagent. At the optimum condition, the detection limit(S/N=3) has been shown 0.1 ㎍/mL N(NO2-), 0.4 ㎍/mL N(NO3-) and 0.3 ㎍/mL N(NH4+) respectively. The results measured by colorimetry, ion chromatography and FIA were compared showing 80%-125% reasonable match each other. Injection throughput rate could be performed better than 30 times per hour.

• Journal of Digital Convergence
• /
• v.18 no.4
• /
• pp.341-346
• /
• 2020

Polymethyl methacrylate (PMMA), a self-curing resin mainly used in removable orthodontic appliances, is an acrylic resin mainly used in the field of modern dentistry. As an advantage, it has been used for a long time as a material for orthodontic devices in dentistry due to its color and volume, tissue affinity, and stability. The production of PMMA can be divided into self-polymerization method and thermal polymerization method according to activation method. Self-curing resins have long been used as orthodontic devices. The resin injection method is largely divided into a sprinkle-on method and a mixing method. In this study, we intend to test the mechanical properties according to the resin injection method of the orthodontic device, such as strength, modulus of elasticity, and surface roughness. There was no significant difference in strength as a result of three-point bending strength test on rectangular specimens (1.4 × 3.0 × 19.0 mm) of orthodontic PMMA. There was also no significant difference in hardness. There was no significant difference in surface roughness. It was confirmed that the orthodontic PMMA had no significant difference in mechanical properties according to the resin injection method of the orthodontic device.