• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.352-357
• /
• 1995

원자력발전소 화학 및 체적제어계통의 일부인 밀봉수주입계통은 원자로 냉각재펌프 밀봉장치로 일정한 온도 범위의 밀봉수를 공급하여 밀봉장치의 건전성 및 원자로 냉각재 계통의 압력경계를 유지한다. 그러나 발전소 과도상태시 밀봉수 주입온도가 허용범위를 벗어나게 되면 온도조절기 폐쇄신호에 의해 밀봉장치로의 밀봉수 주입이 차단될 수 있다. 본 연구에서는 발전소 과도시에도 밀봉수 주입이 지속적으로 가능한 설계개선 방안으로 밀봉수주입 열교환기 주위에 우회라인을 설치하는 방안을 제시하고 밀봉수주입 열교환기 내에서의 비정상 열전달 현상을 수치해석을 이용하여 분석하였다. 계산은 속도장을 정상 상태인 power-law분포로 가정하고 시간 t=0에서 입구온도가 급격히 변하는 과도시 우회 유량 및 시간 변화에 대한 온도분포, 국부 Nusselt 수, 평균온도 등을 구하였다.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.604-606
• /
• 2008

본 논문에서는 단상 계통 연계 태양광 인버터의 소신호 모델링을 통한 체계적인 제어기 설계 방법을 제안한다. 계통 연계 태양광 인버터의 내부 전류제어기는 계통 전압과 동상이 되도록 계통 주입 전류를 제어하고, 외부 전압제어기의 태양전지 안정화 제어기를 통해 태양전지의 최대전력점 추적제어를 수행한다. 태양전지의 전 동작 영역에서 안정적인 동작 수행과 계통주입 전류 제어를 위한 태양전지 전압 제어기 및 인버터 전류제어기의 안정도 해석 및 설계 방법을 소신호 모델링을 통해 제시한다. 본 연구에 제안된 방법은 200W급 태양전지를 이용한 축소 시스템을 이용하여 검증한다.

• Analytical Science and Technology
• /
• v.9 no.1
• /
• pp.35-42
• /
• 1996

A rapid analytical method based on capillary electrophoresis is described for the determination of trace anions in high-purity chemicals which is used to prevent corrosion demage in nuclear power plants. Separations are carried out at 20kV using trimethylsilane-coated fused-silica capillary ($70cm{\times}50$ or $75{\mu}m$ i.d.) with the electrolyte of 5mM Chromate(pH=8). Detection was achieved using on-column indirect photometry at 254nm. The simultaneous analysis of inorganic anions, chloride, nitrate, sulfate, azide and phosphate was performed using methods of hydrodynamic(>1ppm) and / or electrokinetic(<1ppm) injection. The results of studies on the coexisting anions on analyte ions shows that peak responses of analyte in hydrodynamic injection is constant without effect of coexisting anions, but those of analysis in electrokinetic injection is strongly dependant upon the kind of coexisting anions and its ionic mobility. The analyte enrichment rate, hence peak response, is positive relationship with the resistance of the sample solution. Thus, appropriate measures, such as standard addition or internal standard technique, must be used to account for differences in conductance of standard and sample solutions.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.4
• /
• pp.341-347
• /
• 2011

This work studies the performance of an injector for a monopropellant thruster, comparing a conventional and new injector types. The conventional injector consists of 8 nozzles on a convex surface allowing the jet to be diverged. The new injector, we suggested, is an impinging type with nozzle holes on a concave surface. The fuel streams through the nozzle holes are collide at a point on an axial direction, which allow to atomize the liquid streams and to spray more uniformly along circular direction. The performance of the injectors is investigated by using computational fluid dynamics, particle image velocimetry and high speed camera visualization.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.6
• /
• pp.1-9
• /
• 2022

In this paper, we propose a general-purpose fault injection system for Linux loadable kernel modules. The fault injection system enables software developers and testers to inject various kinds of faults easily into user-specified kernel modules in user-controlled manner. The proposed system also provides workload generation in order to make injected faults be exposed effectively, By experiments, we show that the fault injection system correctly injects faults into Linux kernel modules. The proposed system can be utilized as a useful tool for testing during kernel module development It is also useful for studies on kernel behaviour analysis and fault isolation and recovery.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.654-658
• /
• 2012

In this study, $CO_2$ capture efficiency in relation to the inlet moisture content of the regenerator was investigated using potassium-based sorbents in the continuous process composed of two bubbling fluidized-bed reactors, where solid outlet configuration in the regenerator was converted from underflow to overflow. XRD (X-ray Diffraction), SEM (Scanning Electron Microscope) and TGA were performed to find out the effect of water pre-treatment according to inlet moisture content in the regenerator. The $K_2CO_3{\cdot}1.5H_2O$ structure of solid sorbents has been increased as inlet moisture content of the regenerator increased. As a result, the $CO_2$ capture efficiency increased as the $K_2CO_3{\cdot}1.5H_2O$ structure of solid sorbents increased since the reactivity of the sorbents has been improved by that structure generated by the water pre-treatment. And $CO_2$ capture efficiency increased about 3~8% after sorbent outlet configuration of the regenerator was changed underflow to overflow.

• Nuclear industry
• /
• no.6
• /
• pp.20-22
• /
• 1979

본문은, 일본의 통산성${\cdot}$에너지청이 4월 24일 일본의 원발20기에 대해서 행한 안전총점검의 중간보고를 요약한 것이다. 여기서, 보수관리상황을 점검한 주요설비는 다음과 같다. (1) 보조급수계 (2) 가압기방출 Valve (3) 비상용노심냉각장치 1) 고압주입계 2) 축압 Tank 3) 저압주입계 4) 격납용기내부 Spray계 5) 격납용기격리변 6) 비상용전원 등이며 주로 기동전 확인과 일상점검에 중점을 두었던 것이다.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.3
• /
• pp.330-336
• /
• 2005

The ozone injection method was proposed to improve the catalytic process for the removal of nitrogen oxides ($NO_x$). Nitric oxide (NO) in the exhaust gas was first oxidized to nitrogen dioxide ($NO_2$) by ozone produced by dielectric barrier discharge, and then the exhaust gas containing the mixture of NO and $NO_2$ was directed to the catalytic reactor where both NO and $NO_2$ were reduced to $N_2$ in the presence of ammonia as the reducing agent. A commercially available $V_2O_5-WO_3/TiO_2$ catalyst was used as the catalytic reactor. The $NO_2$ content in the mixture of NO and $NO_2$ was changed by the amount of ozone added the exhaust gas. The effect of reaction temperature, initial $NO_x$ concentration, feed gas flow rate, and ammonia concentration on the removal of $NO_x$ at various $NO_2$ contents was examined and discussed. The increase in the content of $NO_2$ by the ozone injection remarkably improved the performance of the catalytic reactor, especially at low temperatures. The present ozone injection method appears to be promising for the improvement of the catalytic reduction of $NO_x$.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.267-269
• /
• 2008

본 연구는 이온주입(Ion Implanter)장비의 성능향상과 재현성 있는 Source Head를 개발하기 위한 방법이다. 본 개발은 이온주입설비가 가지고 있는 Cathode 열전자를 이용하여 원자라는 Source Positive의 극성을 생성하여 보다 높은 이온화를 발생하여 많은 시간 동안 사용 가능하도록 하였다. 기존에는 Gas의 손실이 많아 원자의 이온화에 대한 열전자의 소모성을 증가하는 원인을 제공하였으나, 본 개발에서는 원자의 유입방식을 공중 분산방식으로 적용함으로써 열전자의 손실로 발생하는 부분을 억제하는 효과와 Arc Chamber의 압력을 낮게 가지고 갈 수 있고 Chamber의 오염을 억제하는 효과를 얻을 수 있었다.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.2
• /
• pp.41-47
• /
• 2012

The purpose of this study was to determine optimum condition for the cultivation of Chlorella sp. FC-21 using red light emitting diodes (LED). Specific growth rate and cell concentration were measured for the reactors at the illuminations of different light intensity of red LED. Under the illumination of red LED, specific growth rate increased as light intensity increased but cell concentrations decreased. To determine beneficial effect of aeration to cell cultivation, micro-air bubbles were aerated at 0.7 vvm in the reactor at the illumination of red LED. Two and ten times greater specific growth rate and cell concentration were obtained when aeration was applied. In case of blowing of carbon dioxide, pH of culture medium decreased below to pH 3, which resulted in decreases of cell concentration. From this study, we found that red LED with aeration were the most appropriate light source for the cultivation of Chlorella sp. FC-21.