• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.102-103
• /
• 2021

In Korea, starting with the Busan residential-commercial fire in 2010, the frequency of fire expansion in high-rise buildings has been continuously increasing. In the case of such large-scale fires, most of the fires generated from the inside tend to expand to the upper floors by riding the exterior material or exterior wall panels through the process of being ejected to the outside. It has been revised so that combustible exterior materials cannot be used in buildings. However, due to the legal fluoride level, the fire risk of high-rise buildings is still high, such as the case of a 33-story residential-commercial fire in Ulsan. In order to prevent such fire expansion, it is considered that it is necessary to first understand the nature of the fire occurring inside and the mechanism of the fire expansion in the upper floor. The purpose of this study is to propose improvements in domestic fire safety design through a review of existing literature to prevent fire expansion of high-rise buildings.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.4
• /
• pp.1-7
• /
• 2008

This study analyzed for hydrodynamic dispersion characteristics of multi-soil layer (Silt and clay, Find sand, Coarse sand), data of a field tracer test on the multi-soil layer and data of laboratory column experiments on the samples on each soil layers. Through the analysis of permeability and flow, MS (Silt and clay) and FS (Fine sand), which were low effective porosity, were higher average linear velocity while CS (Coarse sand), which was high effective porosity, was higher hydraulic conductivity. Hydraulic conductivity function based on average soil particle diameter was assumed Y=$3.49{\times}10^{-8}e^{15320x}$ and coefficient of determination was 0.90. Average linear velocity function based on average soil particle diameter was assumed Y=$1.88{\times}10^{-7}e^{11459x}$ and coefficient of determination was 0.81. Longitudinal dispersivity function based on average soil particle diameter was Y = 0.00256$e^{5971x}$ and coefficient of determination was 0.98. According to the linear regression analysis of average linear velocity and longitudinal dispersivity, assumed function was Y = 21.7527x + 0.0063, and coefficient of determination was 0.9979. The ratio of field scale/laboratory scale was 54.09, it exhibited scale-dependent effect of hydrodynamic dispersion. Field longitudinal dispersivity (1.39m) was 7.47 times as higher than longitudinal dispersivity estimated by the methods of Xu and Eckstein (1995). Hydrodynamic dispersion on CS layer was occurred mainly by diffusion flow in the test aquifer.

• Restorative Dentistry and Endodontics
• /
• v.35 no.2
• /
• pp.134-142
• /
• 2010

The purpose of this study was to evaluate the effect of Er,Cr:YSGG laser irradiation with hypersensitivity mode on microtensile bond strength of composite resin. Twenty extracted permanent molars were randomly assigned to six groups, according to the irradiation of Er,Cr:YSGG laser, adhesive system (Optibond FL or Clearfil SE bond) and application time of etchant (15 sec or 20 sec). Then composite resin was build up on each conditioned surface. The restored teeth were stored in distilled water at room temperature for 24 h and twelve specimens for each group were prepared. All specimens were subjected to microtensile bond strength and the fracture modes were evaluated. Also, the prepared dentin surface and laser irradiated dentin surface were examined under SEM. The results were as follows: 1. The microtensile bond strength of laser irradiated group was lower than that of no laser irradiated group. 2. Regardless of laser irradiation, the microtensile bond strength of Optibond FL was higher than that of Clearfil SE bond. And the microtensile bond strength of 20 sec etching group was higher than that of 15 sec etching group when using Optibond FL. 3. The SEM image of laser irradiated dentin surface showed prominent peritubular dentin, opened dentinal tubules and no smear layer.

• Journal of Navigation and Port Research
• /
• v.35 no.1
• /
• pp.57-62
• /
• 2011

On the view point of renewable energies as energy sources of district heating and cooling plant, the purpose of this study is to develop, classify and map the 500m${\times}$500m mesh, of which is treated as normal size in DHC regulations for evaluation process. Followings are the results. Various building and geographical informations including 13 districts and 108 counties are re-defined to create 500m${\times}$500m meshes, and it is find out that 3,289 meshes among 8,463 meshes have meaningful floor areas. Only 59 meshes(1.8%) are evaluated as mesh which has more than 50% of building volume ratio per mesh. 5 clusters classified by principal analysis and cluster analysis with building needs' characteristics are defined. Gwang-an Dong is representative of cluster 1 characterized as commercial area, and the cluster 4, 5 which has mainly residential needs are distributed in Yong-ho dong. Because there are a lot of cluster 3 meshes, which has complex needs area based on residential, cluster 3 could be defined as representative of Busan metropolitan city.

• Korean Architects
• /
• no.11 s.427
• /
• pp.18-32
• /
• 2004

영예의 대통령상이 수여되는 한국건축문화대상의 대상이 올해부터 '비주거'와 '주거'로 나뉘어 확대, 시상한다. 그 첫번째 수혜자로 비주거부문은 김삭식 건축사(주.금성 종합건축사사무소 대표)가 설계하고, (주)금호산업이 시공한 '광주광역시청사'가 주거부문에는 김종국(주.종합건축사사무소 건원)건축사가 설계하고, 현대산업개발(주)이 시공한 '아이파크 삼성동'이 국내 준공건축물들을 대상으로 한 2004한국건축문화대상에서 영예의 대상으로 각각 선정됐다. 또 올해 한국건축문화대상에서는 KT여의도사옥 등 6작품이 본상을 차지한 것을 비롯해 우수상 등 모두 22개 작품이 수상작으로 선정됐다. "불이 - Architecture in NatureㆍNature in Architecture"를 주제로 공모한 일반 및 신인ㆍ학생 대상의 계획건축물부문에서는 박종대, 윤새봄, 김정희(인하대학교 건축공학과대학원 건축의장연구실)씨가 공동 출품한 'Plankton House'가 금상을 차지한 것을 비롯해 은상 2팀, 동상 3팀 입선 22점 등 모두 28개 팀이 입상했다. 올해 한국건축문화대상에는 준공건축물부문 89점, 계획건축물부문 252점 등 총 341개 작품이 응모했다. 비주거 부문의 대상을 차지한 광주광역시청사는 "관 건물의 이미지를 탈피하여 하나의 문화 건물로 탈바꿈하려는 시도가 특히 돋보이는 작품으로 시공에도 많은 어려움이 있었음에도 불구하고 완성도가 우수한 작품"이란 평을 받았다. 또한 주거 부문의 아이파크 삼성동은 "아파트이면서도 주상복합의 이미지를 구현시키면서 판상형 형태에서 벗어나 탑상형 배치에 의한 낮은 건폐율 적용으로 친환경적인 단지를 이루고 있으며, 특히 시공이 매우 우수한 작품"이란 평을 받았다. 한편 올해부터 우리나라 건축문화발전을 위해 기여한 건축인을 발굴해 시상하는 '올해의 건축인상'을 제정, 그 첫번째 수상자로 김석철 건축사(아키반건축도시연구원 건축사사무소)와 이창남 건축사(센구조 건축사사무소)가 선정되어 건설교통부장관상을 받았다. 시상식은 지난 11월 24일 서울 종로구 세종로 세종문화회관 컨벤션홀에서 개최되어 대상의 비주거부문 수상작의 설계자인 김상식 건축사에게 대통령상 그리고 시공자인 (주)금호산업에게는 건설교통부장관상, 건축주인 광주광역시장에게는 국무총리상이 수여됐다. 또한 주거부문 수상작의 시공자인 현대산업개발(주)에게 대통령상 그리고 설계자인 김종국 건축사에게는 국무총리상, 건축주인 현대산업개발(주)에게는 건설교통부장관상이 수여됐다. 또 KT 여의도빌딩 등 본상 6개 작품의 설계자 및 시공자에게는 건설교통부장관상 등 정부포상이, 준공건축물부문 우수상 입상자 전원에게는 각각 대한건축사협회장상, 서울경제신문사장상이 수여됐다. 계획건축물부문의 금상 수상자에게는 건설교통부장관상과 상금이 수여되었으며, 은상과 동상, 입선작은 대한건축사협회장상과 상금이 각각 수여됐다. 아울러 동상이상 수상자 중 영어 인터뷰심사를 거쳐 2명을 선발, ARCASIA 학생잼버리대회 파견 특전이 주어진다. 건설교통부와 대한건축사협회, (주)서울경제신문이 공동주최하고 대한주택공사 등 건설관련 5개 단체가 후원하는 한국건축문화대상은 올해로 13회째 개최되고 있다. 더욱이 올해에는 대통령상을 두 부문으로 나누어 시상하는 등 그 폭이 넓어져 수상자에게 더 큰 영예를 주었으며, 시간이 흐를수록 그동안 기성 건축인들의 창작의욕 고취는 물론 건축저변을 크게 확대하였다는 평과 아울러 우리 건축문화 창달에 기여해 한국건축문화대상은 명실공히 국내 건축인은 물론 일반 국민의 대표 건축축제로 자리매김하고 있다.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.4
• /
• pp.54-61
• /
• 2008

Permeable reactive barriers (PRBs) technology has been focused in contaminated groundwater remediation. It is necessary to select adequate reactive material according to characteristics of contaminant in groundwater. In this research, the reaction between reactive material and heavy metal contaminants was estimated through column test. Reactive material was slag, which has been produced in Gwangyang power plant, and heavy metal contaminants were cadmium, lead and copper. Column test was performed in the condition of 1) single and multi contaminated solution and 2) different initial concentration of cadmium. Retardation factor of cadmium is 3.94 in multi contamination. But that of copper is 40.3 in single and 25 in multi. The difference of retardation between cadmium and copper is due to affinity, resulted from the difference of electronegativity. In multi-contamination, copper effluent concentration was above initial copper concentration and at the same time lead effluent concentration was decreased. This phenomenon was considered that lead extract copper sorbed in slag and then lead was sorbed to the vacant sorption site instead. And as the initial concentration was increased, the retardation factor of cadmium became decreased.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.1
• /
• pp.43-52
• /
• 2011

Unnecessary transportation of resources are one of the major causes that adversely affect construction site work productivity. Therefore, layout related studies have been conducted with efforts to develop management technologies and techniques to minimize the resource transportation made at site-level. However, although the necessity for floor-level layout planning studies has been increasing as buildings have become larger and floors have become more complicated, studies to optimize the transportation of materials inside buildings are currently not being actively conducted. Therefore, in this study, a model was developed using genetic algorithms(GA) that will enable the optimization of the locations of finishing materials on the work-floor. With the established model, the arrangement of diverse materials on complicated floors can be planned and the optimized material layout planning derived from the model can minimize the total material transportation time spent by laborers during their working day. In addition, to calculate travel distances between work sites and materials realistically, the concept of actual travel distances was applied. To identify the applicability of the developed model and compare it with existing methodologies and analyze it, the model was applied to actual high-rise residential complexes.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.256-261
• /
• 2008

The curtain-wall work has been more frequently applied in the construction industry since demand of high-rise buildings has been increased. The curtain-wall work is usually performed with the frame work simultaneously for reducing construction period, but it might be delayed because of several problems caused by interference of process. However, there is not an appropriate tool which can be used by a work manager for adjusting quantity of the construction equipments or the workers when the curtain-wall work was delayed. To resolve this problem a construction simulation anticipating and analyzing potential problems before starting the work can be applied in the curtain wall work. This research suggests a general model for the curtain-wall work by using construction simulation and produces a combination of construction equipments and workers which can estimate optimum work productivity.

• Geophysics and Geophysical Exploration
• /
• v.10 no.4
• /
• pp.322-331
• /
• 2007

In this study, electrical resistivity tomography (ERT) were conducted to find the mineralized zone at the Geumpung mine in Dojeon-ri, Susan-myeon, Jecheon-si, Chungcheongbuk-do. The deviation of the inclined borehole was measured to obtain the exact positions of the electrodes for correcting apparent resistivity values from ERT. Geophysical loggings such as resistivity and natural gamma were conducted to obtain the properties of the material near the borehole. Measurements of the physical properties of the cores, such as porosity, water content, density, susceptibility, resistivity were performed to analyze the correlation between physical properties and resistivity. Grade analysis for core sample was also conducted to identify relationship between grade and resistivity. Rock property analysis shows that the resistivity is more dominated by susceptibility and grade than by porosity and water content in the mineralized zone. The results of ERT are well consistent with geophysical logging data and geologic column. So ERT is powerful method to identify conductive mineralized zone.

• Spatial Information Research
• /
• v.23 no.2
• /
• pp.49-57
• /
• 2015

Recently, Through the linkage and opening, the fusion of the spatial information, it is necessary for productive ecosystem to provide a variety of information and to increase the civil use. Depending on the economic growth, demand for quality of life and well-being has been on the increase. Spatial information service contents for the public convenience has emerged to solve the problem such as health, safety, welfare and discomfort of daily life This study aims to implement search services for a tailored residence space through the three-dimensional data modeling on cadastral information. To achieve this goal, we established the requirements for deriving a registered object by investigating recent trend with respect to existing cadastral data model and defined property and relationship. Focusing on Songpa-gu, Jamsil station in Seoul, we implemented search services for a tailored residence space for three-dimensional right analysis in conjunction with residential and commercial complex building. As a result, we derived a way to supply 3D cadastre information through open platforms (VWorld) and to represent efficiently, which is able to improve the quality of spatial information service contents for the public convenience as well as to widen utilization of information.