• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.124-130
• /
• 2012

The uniform nanofibers of poly(L-lactide-$co$-${\varepsilon}$-caprolactone) (PLCL) with different contents of marine collagen (MC) were successfully prepared by electrospinning method. The effects of the major parameters in electrospinning process such as tip to target distance (TTD), voltage, nozzle size and flow rate on the average diameter of the electrospun nanofiber were investigated in generating composite nanofiber. The diameter and morphology of the nanofibers were confirmed by a scanning electron microscopy (SEM). Also, we measured a water contact angle to determine the surface wettability of the nanofibers. The average diameter of the nanofibers decreased as the value of TTD, MC contents, and voltages increased in comparison with that of pristine PLCL nanofiber. In contrast, the diameter of the nanofibers increased as the flow rate and inner diameter of nozzle increased in comparison with that of pristine PLCL. In addition, the hydrophilicity of the nanofiber and attachment of MG-63 cells on the sheets increased as incorporated collagen contents increased. Therefore, the marine collagen would be a potential material to enhance cellular interactivity of synthetic materials by mimicking the natural tissue.

• Culinary science and hospitality research
• /
• v.20 no.1
• /
• pp.27-37
• /
• 2014

This study examines the quality characteristics of the muffins made by adding 3%, 6%, and 9% of beet powder, comparing with the reference group. The result showed that there has been no significant difference in the ash content from the groups added with 3% and 9% of beet powder. The height of muffins appeared to be 4.7~5.0 cm, which didn't show any significant difference among the samples. The volume of beet muffins has shown significant difference among the samples (p<0.001). From the measurement result by scanning electron microscope (SEM), the samples had thick cellular walls and coarse pores because there was less gluten content with increased beet powder. From the chromaticity measurement result, L value and b-value decreased, while a-value increased with increased beet powder. From the texture measurement result, hardness increased with increased beet powder. Adhesiveness appeared to be getting lower with increased beet powder. Also, there was significant difference among the samples for cohesiveness (p<0.001). Gumminess got higher in the samples added with 3% and 6% of beet powder, and the highest chewiness was shown in the sample group added with 3% of beet powder. From the sensory evaluation result, overall acceptance has appeared in order of 6% > 9% > 3% > 0%.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.2
• /
• pp.216-224
• /
• 2008

The purpose of this study was to evaluate the effectiveness of fissurotomy and double application time of acidic primer of self-etching adhesive system of acid treatment on enamel surfaces for prevention of microleakage of pit and fissure sealants. The microleakage of pit and fissure sealants was evaluated by measuring the penetration depth of methylene blue solution. Specimens were divided by 4 groups according to the method of treatment. Group I: 35% phosphoric acid etching, 20 seconds. Group II: Priming with self-etching primer, 20 seconds. Group III: Priming with self-etching primer, 40 seconds. Group IV: Priming with self-etching primer, 20 seconds, after fissurotomy. The etched pattern produced on enamel was observed using a scanning electron microscope. Obtained data were analysed statistically using Kruscal-Wallis test followed by Mann-Whitney test for comparison of groups. The results are as follows: 1. Microleakage scores of group IV priming with self-etching primer 20 seconds after fissurotomy was the lowest. 2. Microleakage scores between group II and group III were not shown significant difference. 3. Enamel for 20 seconds etching with 35% phosphoric acid was observed the most effective etching pattern. And the etching pattern on the fissure enamel with self-etching adhesive 20 seconds after fissurotomy was more prominent than group II, III only using self-etching primer.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.3
• /
• pp.185-193
• /
• 2013

Mineral trioxide aggregate (MTA) has recently been used as a pulpotomy medicament for primary molars. The aim of this study was to evaluate and compare the proliferation and differentiation potential of dental pulp stromal cells of permanent teeth and deciduous teeth cultured on MTA-coated surface. Human dental pulp stromal cells were obtained from human permanent premolars and deciduous teeth and cultured on MTA-coated culture plates. The cells were subjected to proliferation assay and cell cycle analysis. Their differentiation potential was evaluated by analysing changes in the mRNA expressions of runt-related transcriptional factor 2 (Runx2) and alkaline phosphatase (ALP). Morphological changes of cells in direct contact with MTA were observed using scanning electron microscopy (SEM). The proliferation rates, distribution of cell cycles and mRNA expression patterns of Runx2 and ALP were similar in both types of pulpal cells. SEM observations revealed that both types changed into more dendrite-like cells. On the surface of MTA, human dental pulp stromal cells from deciduous and permanent teeth were able to both proliferate and differentiate into cells that induce mineralization. MTA is suitable as a biocompatible pulpotomy medicament for primary teeth.

• Journal of Veterinary Clinics
• /
• v.27 no.3
• /
• pp.252-256
• /
• 2010

Bovine mastitis, defined as an inflammation of the mammary gland, is usually associated with bacterial infection. Thus, treatment and control of mastitis relies primarily on antimicrobial therapy. This study investigated the bactericidal actions of silver ion against causing various bovine mastitis pathogens. Minimal inhibitory concentrations (MICs), minimum bactericidal concentrations (MBCs) and bactericidal activity times and concentrations of silver ion against pathogens were determined. The effect of silver ion on bacterial morphology was studied by scanning electron microscopy (SEM). The MICs and MBCs of silver ion for various bacteria strains ranged from 1.9-15.6 ${\mu}g$/ml. SEM images indicated formation of a pit, distortion and disruption of cell walls in silver treated Staphylococcus aureus and Escherichia coli. The results demonstrate that silver ion has a bactericidal capacity against causing various pathogens of bovine mastitis and suggest that silver ions may be exploitable as a therapeutic/preventative tool of bovine mastitis.

• Food Science of Animal Resources
• /
• v.25 no.3
• /
• pp.350-356
• /
• 2005

We examined the enhancement of thermotolerance for storage conferred on Lactobacillus acidophilus 30SC by adaptation to different stresses. The viable cells of Lactobacillus acidophilus 30SC were compared with their viability prior to heating at $45,\;55^{\circ}C\;and\;60^{\circ}C$. Heat-adapted ($45^{\circ}C$ for 15 min) L. acidophilus 30SC in MRS broth exhibited higher survivability at lethal temperature of $55^{\circ}C$ than control. Cellular protein profiles of L. acidophilus 30SC during heat adaptation were examined with SDS-PAGE, and scanning electron microscopy. When L. acidophilus 30SC was heat-adapted at $55^{\circ}C$ for 15min, 5 new protein spots of ca $8\~45\;kDa$ size were observed on 2D SDS-PAGE. It was presumed that new proteins of L. acidophilus 30SC were produced to adapt to the environment of higher growth temperature.

• Journal of Periodontal and Implant Science
• /
• v.35 no.3
• /
• pp.549-561
• /
• 2005

이 연구의 목적은 새로이 제작된 chitosan-poly(L-lactic acid)(PLLA) 다층 다공성 차폐막의 생체적합성 및 골세포활성도 및 골재생능을 평가하는 것이다. 제작된 차폐막을 24 well에 넣고 clonal osteoblast-like cell line(MC3T3-E1)을 접종한 군을 실험군으로, 차폐막을 사용하지 않은 대조군으로 하였다. 배양 1일, 7일 및 14일째에 각 well에서 세포수를 측정하였다. 주사전자현미경을 이용하여 차폐막에 부착된 세포의 형태관찰을 시행하였다. RNA 추출 및 RT-PCR을 실시한 후, agarose gel상에서 전기영동하여 조골세포 표식자인 collagen type I(COL), osteopontin(OP) 및 osteocalcin(OC) mRNA의 발현을 관찰하였다. 제작된 매트릭스의 생체적합성 및 골재생능을 관찰하기 위하여 백서의 두개골에 직경 8mm의 원형 결손부를 형성한 후 차폐막을 이식한 군을 실험군으로, 아무 것도 넣지 않은 군을 대조군으로 하여 4주 경과 후 실험동물을 희생시킨 후 조직학적관찰을 시행하였다. 시간경과에 따른 부착세포수 관찰결과, 배양 14일까지 조골세포의 수가 지속적으로 증가하였고, 주사전자현미경으로 세포의 형태 관찰결과, 배양된 세포들은 중층의 형태로 성장하면서 시간경과에 따라 세포가 응집되는 양상을 나타내었다. 관찰 기간동안 COL, OP, 및 OC mRNA의 발현이 관찰되어 배양 전 기간동안 조골세포의 형질이 잘 유지되고 있음을 알 수 있었다. 백서 두개골 결손부에 이식된 차폐막은 염증반응 없이 주위 조직과 우수한 생체적합성을 나타내었으며, 차폐막을 이식하지 하지 않은 대조군에 비해 높은 신생골 형성을 나타내었다. 이상의 관찰결과로 새로이 제작된 chitosan-PLLA 차폐막은 우수한 생체적합성 및 골재생능을 나타냄을 알 수 있었으며, 향후 이를 골조직 재생 및 치주조직유도재생 분야에 응용될 수 있을 것으로 생각된다.

• Journal of dental hygiene science
• /
• v.9 no.5
• /
• pp.525-530
• /
• 2009

The purpose of this study was to evaluate color change and enamel surface changes using the plasma arc light source during tooth bleaching treatments. Twenty-four extracted bovine incisors were selected and embedded in the resin blocks. All the specimens were highly polished and discolored with commercial $COCK^{(R)}$. High concentration carbamide peroxide with and without plasma arc were used for bleaching. Specimens were bleached for 1 hour per week during 3 weeks. Color and enamel surface changes were determined with colorimeter (TC-8600A), microhardness tester(MXT-a7), scanning electron microscope(S-4200). All the collected data analyzed with paired t-test, t-test and one-way ANOVA. After the bleaching, both groups showed the color changes(${\Delta}E^*$). Microhardness of two group decreased after tooth bleaching. The SEM evaluation of enamel surface of both group showed a similar morphology of decalcification after tooth bleaching. Office bleaching using the plasma arc application with 35% carbamide peroxide can increase the color change. Office bleaching using the high concentration of carbamide peroxide and plasma arc also detract the outer surface of enamel. It is recommended that careful procedures are needed during office bleaching with high concentration of carbamide peroxide and light source.

• Mineral and Industry
• /
• v.18 no.1
• /
• pp.1-17
• /
• 2005

국내의 납석 광상은 대부분 백악기의 화산암류들이 열수변질되어 형성된 광상으로서, 주로 전남 및 경남 지역에 밀집되어 분포한다. 납석은 지질 여건상 주로 경상분지 내에 국제적인 규모의 풍부한 부존자원이 있지만, 그 동안의 개발에 의해서 고품위 황석들은 상당히 채진된 상황이다. 현재 개발되고 있는 광체들은 몇 곳의 광산을 제외하고는 대부분 저품위 광상을 이루고 있기 때문에, 새로운 광체의 탐광이 이루어지지 않는다면 앞으로 고품위 광석에 관한 한 국내의 수요를 충당하기 어려운 상황에 이를 것으로 예견된다. 현재 국내에서 납석으로 개발되고 있는 광석의 상당수(대략 $40\%$ 정도)가 엄밀한 의미에서는 사실상 납석이 아닌 고령토나 견운모 광석인 것으로 밝혀졌다. 엽납석을 함유하는 정상적인 형태의 납석들은 그수반 점토광물상에 의거하여 (l) 엽납석질, (2) 딕카이트질. (3) 일라이트질 및 (4) 딕카이트-일라이트질 유형으로 구분될 수 있다. 고령토 광물로는 대부분 딕카이트가 수반되고 외국에서는 흔히 수반되는 것으로 알려져 있는 고령석은 거의 함유되지 않는 것이 특징이다. 석영은 납석에서 점토광물 못지않게 그 용도를 가름하는 주요 성분으로서 대부분의 광석 유형에서 수반되지만 특히 일라이트질 납석에서 흔히 그리고 보다 많이 수반되는 양상을 보인다. X-선회절 정랑분석법은 납석의 품위를 산정하는데 유력한 수단이 될 수 있다. 특히 납석 이외의 점토광물들의 조성, 특히 일라이트의 함유 정도는 납석의 용도별 품위와 품질을 가름하는 주요 사항이다. 화학분석에 의한 납석의 평가 방식은 특히 납석의 백색 도기류와 같은 각종 세라믹스 제조 용도에서의 품질 평가에 결정적인 단서를 제공하는 유력한 평가수단이다. 특히 착색유발 성분인 철분의 존재와 그 함량을 정하고 요업용도에서 중요한 $Al_3O_3$와 알칼리 성분 함량을 검증하는데 필수적인 평가 방법이다. 이외에 주사전자현미경 관찰을 통해서 납석의 주요 품질 기준이 되는 극미립상 엽납석의 결정형, 조직 및 미시적 산출상태를 보다 정밀하게 평가할 수 있는 방안을 제공한다. 현행 광업법상의 납석을 비롯한 관련 광종들의 광물분류 체계가 모호하게 설정되어 있고 관련 인허가 부서에서의 전문성 및 지도력 부족으로 관련 산업계에 심각한 비효율성과 오류가 야기되고 있는 실정이다. 이를 개선하기 위해서는 납석의 광석평가 방식이 그 품위와 품질 개념 하에서 응용광물학적으로 적용되어야 할 것이다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.74.1-74.1
• /
• 2010

단결정 실리콘 태양전지 공정에서 이방성 습식 식각 용액을 이용하여 기판 표면에 피라미드 구조를 형성하는 것을 텍스쳐링이라고 한다. 실리콘 기판의 표면을 식각하여 요철구조를 만들어줌으로써 셀 내부로 입사되는 광량을 증가시켜 태양전지의 단락 전류 및 효율 향상 효과를 얻을 수 있다. 일반적인 태양전지 공정에서는 요철구조를 형성할 시 따로 마스크를 사용하지 않으며, 태양전지 급 웨이퍼를 절삭손상층 식각 한 후, 강염기성 용액과 알코올의 혼합용액에 담가서 이방성 식각을 실시하여 요철 구조를 형성한다. 본 연구는 기존의 텍스쳐링 공정에서 사용되는 대표적인 용액인 수산화칼륨(potassium hydroxide, KOH)과 알코올의 혼합용액과 사메틸수산화암모늄(Tetramethylammonium Hydroxide, TMAH)과 알코올의 혼합용액에 Triton X-100 계면활성제를 각각 첨가하여 실험을 진행하였다. 식각된 태양전지용 실리콘 기판의 표면은 주사전자현미경(Scanning Electron Microscope)을 통하여 관찰하였고, 분광광도계(UV/VIS/NIR Spectrophotometer)로 반사도 값을 측정하여 기판의 특성을 평가하였다.