• Title/Summary/Keyword: 주기적 가열

Search Result 41, Processing Time 0.026 seconds

Heat Transfer Analysis of the Opaque Solid Heated by Pulsed Laser (Pulsed Laser에 의하여 가열되는 불투명 고체의 열전달 해석)

  • 전민호;이은호;유재석
    • Journal of Energy Engineering
    • /
    • v.8 no.1
    • /
    • pp.181-188
    • /
    • 1999
  • 재료의 표면을 pulsed laser로 가열할 때, 유한한 두께를 가지는 반무한 평판의 온도분포를 해석하여 열확산계수, 재료의 두께, 열원의 주기, 그리고 열원의 반경이 온도분포에 미치는 영향을 알아보았다. Pulsed laser에 의하여 가열되는 불투명 고체의 시간에 따른 온도는 전체적으로 증가하지만 열원의 주기와 동일한 주기를 가지고 일정한 온도차를 가지는 전체온도와 평균온도의 차, Tac가 존재한다. 열확산계수가 증가하면 재료 내부로 에너지의 확산이 활발하기 때문에 Tac는 커진다. 재료의 두께가 열확산길이보다 얇은 경우에는 두께변화에 따라서 온도가 민감하게 변하지만, 열확산길이보다 재료의 두께가 두꺼울 때는 두께의 변화에 관계없이 거의 일정한 온도가 나타난다. 열원의 단속주파수가 증가하면 한 주기당 에너지가 작아지므로 Tac의 크기는 작아진다. 열원의 반경이 커지면 단위면적당 에너지가 감소하므로 Tac의 크기는 삼각파, 싸인파, 사각파 순으로 크게 나타난다. 따라서 열원의 파형을 측정하여 이를 적용하는 것이 바람직하다.

  • PDF

Model-Based Scheduling Optimization of Hot Press Forging Process for Energy Efficiency (열간 자유 단조 공정의 에너지 효율화를 위한 모형 기반 작업 계획 최적화)

  • Lee, Jeongmi;Kim, Seyoung;Ryu, Kwang Ryel
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2018.10a
    • /
    • pp.641-644
    • /
    • 2018
  • 열간 자유 단조는 고온으로 가열한 강피에 압력을 가하여 원하는 형상을 빚는 공정이다. 가열로에서 여러 개의 강피를 동시에 가열하며 목표 온도에 도달하면 꺼내어 다음 공정을 진행한다. 이때 가열로에 투입하는 소재의 조합과 후단 공정을 위해 소재를 꺼내는 순서가 가열로의 에너지 효율에 영향을 끼친다. 본 논문에서는 열간 자유 단조의 에너지 효율을 높이기 위한 비용 예측 모형 기반 작업 계획 최적화 방안을 제안한다. 유전 알고리즘을 이용하여 가열로 강피 조합을 최적화하며 각 설비별 작업 할당 규칙에 따라 전체 작업 계획을 수립한다. 시뮬레이션 기반으로 후보 작업 계획을 평가하여 계획을 최적화 하며 이를 위해 각 설비별 공정 소요 시간 및 에너지 사용량 예측 모형을 이용한다. 예측 모형은 공정 데이터를 기반으로 기계 학습 알고리즘을 적용하여 학습한다. 또한 주기적인 재계획을 통해 예측의 불확실성으로 인해 작업의 진행이 계획대로 이루어지지 않는 문제점을 해결하고자 한다.

A Characteristics of Smoke Layer Formation Affected Periodicity of Fire Plumes (Plume의 주기성이 연층형성에 미치는 영향)

  • 한용식;김명배;오광철;신현동
    • Fire Science and Engineering
    • /
    • v.16 no.2
    • /
    • pp.38-42
    • /
    • 2002
  • This experiment is to understand a characteristics of smoke layer formation affected periodicity of fire plumes. The ON-OFF jet was used to constitute the oscillating flow, which was formed by a mixture of nitrogen gas with kerosene particles. The instantaneous images was obtained by digital video camera using laser sheet technique. The results were confirmed that the smoke layer in the near fire source comprise vortices which are formed by impingement from the periodicity of fire plume. The periodic impinging of plumes were thickened the smoke layer and produced the back-flow.

Numerical Analysis on 3-dimensional Heat transfer of Heating Surface with Periodically Arrayed Injectors (분사기가 주기적으로 배열된 가열면의 3차원 열전달 수치해석 연구)

  • Cho, Won-Kook;Kim, Young-Mog
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.30 no.8
    • /
    • pp.112-119
    • /
    • 2002
  • Three dimensional numerical heat transfer analysis was carried out against periodically arranged fuel injectors of the liquid rocket engine. A finite volume method based on SIMPLE algorithm was adapted which gave a good agreement with the published results of the heat transfer problem of a backward facing step. The Nusselt number and pressure drop increased as the distance between the injector elements decreased. When the Reynolds number increased, the Nusselt number increased but nondimensionalized pressure drop decreased slightly.

Experimental investigation on the heat transfer characteristics of an oscillatory pipe flow (원관 내 왕복유동에 따른 열전달특성의 실험적 연구)

  • Park, Sang-Jin;Lee, Dae-Yeong;No, Seung-Tak
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.20 no.6
    • /
    • pp.1959-1970
    • /
    • 1996
  • Effects of oscillatory flow upon heat transfer characteristics have been studied experimentally for oscillating flow in a circular tube. The experimental apparatus was designed to simulate the heat exchangers of the Stirling or Vuilleumier cycle machines and the test section consists of heater and cooler. Measurements were presented of heat flux, axial wall temperature distribution, and radial temperature profile of the working fluid for several cases of oscillation frequency and swept distance ratio. The influences of two main parameters, frequency and tidal displacement of the oscillation were investigated. Then the heat transfer coefficient at the heater is obtained. The carried by the authors with a assumption of oscillatory laminar slug flow.

URANS Computations for Flow Mixing of Heated Dual Jets (URANS를 이용한 가열된 이중제트의 유동혼합 특성에 대한 수치해석)

  • Park, Tae Seon
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.23 no.3
    • /
    • pp.18-27
    • /
    • 2019
  • The flow mixing characteristics for the heated dual jets were numerically studied by using URANS (unsteady Reynolds-averaged Navier-Stokes). The increased turbulent diffusion was obtained for the compressible flow, and the thermal diffusion of incompressible flow increased more than that of compressible flow. From the results of FFT and phase portraits, periodic and quasi-periodic states were observed as the jet spacing increased. It was observed that linear variations of merging points and combined points were different because unsteady flow determined the flow mixing characteristics for a large jet spacing.

Analysis of Hyperbolic Heat Conduction in a Thin Film (박막에서 쌍곡선형 열전도 방정식에 의한 열전도 해석)

  • 정우남;이용호;조창주
    • Journal of Energy Engineering
    • /
    • v.8 no.4
    • /
    • pp.540-545
    • /
    • 1999
  • The classical Fourier heat conduction equation is invalid at temperatures near absolute zero or at very early times in highly transient heat transfer processes. In such situations, a hyperbolic equation model for heat conduction based on the modified Fourier law is introduced because the wave nature of heat propagation becomes dominant. The Fourier model and the hyperbolic model for heat conduction are analyzed by using the Green's function technique together with the integral transform. Analytical expressions for the heat flux and temperature distributions in a finite slab subjected to a periodic surface heating at one of its surfaces are presented and the results obtained from each model are compared with each other. The thermal wave implied b the hyperbolic model is shown to travel through a medium and to reflect back toward the origin at the other insulated surface. On the other hand, the heat by the Fourier model propagates at an infinite speed instantaneously after a thermal disturbance is felt throughout the medium.

  • PDF

대기압 유전격벽방전의 구동주파수 변화에 따른 전자가열 양상 변환에 대한 시뮬레이션 연구

  • Lee, Jeong-Yeol;Bae, Hyo-Won;Sim, Seung-Bo;Lee, Ho-Jun;Lee, Hae-Jun
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2014.02a
    • /
    • pp.251.2-251.2
    • /
    • 2014
  • 현재 의료 및 표면처리 분야에 많이 이용되고 있는 상온 대기압 플라즈마 중에서 유전체 격벽 방전(DBD) 장치는 비교적 간단한 구조를 가지며 sub-millimeters 사이즈에서도 매우 높은 플라즈마 밀도의 발생 및 유지가 가능하다. 그러나, 현재로선 이러한 Micro DBD의 특성을 실험적으로 분석하는 것은 장비의 한계가 있으므로, Particle-In-Cell 시뮬레이션을 이용하여 중요 플라즈마 변수들을 관찰하였다. 여기서 사용된 중요변수로는 13.56 MHz~600 MHz사이의 인가 주파수를 두었으며, 유전체 표면에서 양이온에 대한 이차전자 방출계수를 고려하였다, 또한 중성기체는 헬륨가스와 아르곤가스의 2가지 중성기체인 경우를 살펴보았다. 이러한 시뮬레이션을 통해 인가전압의 주기 대비 Ion transit time의 비율이 달라짐에 따라 플라즈마 쉬스의 특성변화와 함께 전자 에너지 확률함수(EEPF)의 특성이 달라진다는 것을 확인하고, 이러한 전자 가열 양상의 변화 원리에 대해서 분석하였다. 또한 주파수 비율 조정을 통한 전자온도, 파워, 효율 등을 조절하는 방법의 공학적 가치에 대해 의견을 제시하였다.

  • PDF

The Effect of Particle Contamination on the Plasma Properties in a Capacitively Coupled RF Plasma Reactor (RF 용량결합 플라즈마 발생장치에서 입자오염이 플라즈마 물성에 미치는 영향)

  • 연충규;양일동;황기웅
    • Journal of the Korean Vacuum Society
    • /
    • v.3 no.2
    • /
    • pp.179-185
    • /
    • 1994
  • 음극에 DLC 필름이 놓여져 있는 용량결합형의 RF 플라즈마 장치에서 Ar가스에 의한 방전에서 발생된 입자의 분포를 레이져 산란에 의하여 관측하였다. 발생된 입자들은 플라즈마와 sheath의 경계면 에서 높은 밀도의 구름을 이루었으며 시간에 따라 주기적인 분포의 변화가 반복되었다, 입자 구름의 발 생은 플라즈마 물성의 변화를 야기하였으며 그 결과로 심한 self-bias 전위의 감소현상이 관측되었다. 입자 구름분포의 시간에 따른 변화와 같은 주기의 self-bias 플라즈마전위의 진동현상이 가열된 fast-scanning langmuir 탐침에 의하여 관측되었다. 이결과는 입자 표면에로의 음전하 누적에 따른 전체 음전하의 이동도 감소에 의한 것으로 해석된다. 또한 방출 분광법에 의하여 입자오염상태의 Ar 플라즈 마와 정상상태의 Ar 플라즈마의 방출 선세기의 변화를 관측하였는데 입자구름 오염시의 2차전자 차폐 현상에 의해 높은 문턱 에너지를 가진 Ar II 선의 세기 감소현상이 나타났다.

  • PDF

지구관측위성 단열재 밀폐붕괴시 히터 임무주기변화에 대한 연구

  • Jang, Su-Yeong;Lee, Deok-Gyu;Lee, Eung-Sik;Lee, Seung-Hun
    • Bulletin of the Korean Space Science Society
    • /
    • 2009.10a
    • /
    • pp.50.3-50.3
    • /
    • 2009
  • 지구관측용 광학탑재체를 탑재한 저궤도위성은 내부부품보호를 위해 표면처리와 같은 수동적 기법과 히터동작과 같은 능동적 기법을 함께 사용을 한다. 내부열손실을 막기 위해 위성외부의 거의 모든 부분을 단열재(MLI)로 감싸게 되며, 각 단열재는 견고하게 고정이 된다. 광학탑재체는 구성품의 보호와 최적성능의 영상획득을 위해 다수의 히터가 장착되는데, 각 히터는 가열대상물의 온도를 실시간으로 측정하여 미리 설정된 On/Off 온도를 기준으로 제어가 된다. 궤도상에서 탑재체가 겪게 되는 다양한 궤도열환경 시나리오에 대한 열해석결과를 이용하여 히터의 위치, 용량 및 제어온도가 결정된다. 궤도상 운용 중, 위성을 보호하는 단열재 사이에 미세한 틈이 발생한 가상적인 상황을 가정하여, 탑재체 히터의 임무주기변화와 탑재체 운용에의 영향을 분석한다.

  • PDF