• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.06a
• /
• pp.503-509
• /
• 2008

현재 동경측지계로부터 세계측지계로의 좌표변환을 하기 위하여 고시된 국가좌표변환계수는 우리나라 전 지역에 대하여 산출된 값으로서 지역마다 정확도에서 어느 정도의 오차를 포함하고 있다. 이에 따라 호남고속철도와 같이 대형국책 사업 수행시 좌표변환 오차로 인하여 문제가 발생하는 경우 경제적이나 사회적으로 많은 영향을 미치게 된다. 본 연구 에서는 호남고속철도 사업구간 오송$\sim$광주 180km구간(철도기준점 231점)을 사용하여 전 구간180km을 3구역으로 나누어 각 구역별(60km)의 지역좌표변환계수와 전구간180km 전체에 대한 지역좌표변환계수 산정하여 지역에 따른 좌표변환 시 적용 가능성에 대하여 살펴보았다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.3
• /
• pp.79-85
• /
• 2008

This study aims to derive a practical coordinate transformation method for the existing geographic information database. After analyzing the status and problems of existing 1/1,000 digital base map and GIS application database, the transformation parameters are estimated and the accuracy of the transformation is determined based on the transformed coordinates. We analyzed the accuracy of a transformation using the published national transformation coefficients as well as the estimated local transformation coefficients using national and urban control points in a study area. In addition, the 1/1,000 digital base map from aerial triangulation is compared with respect to the coordinates of urban control points. Based on the comparison, the biases on the national control points which were used at the time of digital map generation was analyzed. Then, the accuracy of transformed coordinates based on the world geodetic system using local transformation coefficients estimated from urban control points are determined. We also analyzed the transformation accuracy of underground infrastructure database using the same transformation method as the case of 1/1,000 digital base map. Through this study, it was found that the estimation of transformation coefficients by Molodensky-Badekas using urban control points was suitable for a local government. Furthermore, it was obvious that the accuracy of a 2-dimensional affine transformation was comparable to that of 7 parameter transformation for a local area. Applying the coordinate transformation and bias correction, we could transform GIS application database which was built by an offset surveying based on digital base map within the transformation accuracy of 10 cm. Therefore, it was judged that there will not be a big problem on the transformation of the GIS DB to the world geodetic system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.6_2
• /
• pp.613-623
• /
• 2007

The main purpose of this study is to investigate the coordinate transformation based on two different systems between local geodetic datum(tokyo datum) and international geocentric datum(new Korea geodetic datum). For this purpose, three methods were used to determine seven parameters as follows: Bursa-Wolf model, Molodensky-Badekas model, and Veis model. Also, we adopted multiple regression equation method to convert from Tokyo datum to KTRF. We used 935 control points as a common points and applied gross error analysis for detecting the outlier among those control points. The coordinate transformation was carried out using similarity transformation applied the obtained seven parameters and the precision of transformed coordinate was evaluated about 9,917 third or forth order control points. From these results, it was found that Bursa-Wolf model and Molodensky-Badekas model are more suitable than other for the determination of transformation parameters in Korea. And, transforming accuracy using MRE is lower than other similarity transformation model.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.06a
• /
• pp.405-410
• /
• 2008

세계적으로 세계측지좌표계의 도입이 확대됨에 따라 우리나라도 2001년 측량법의 개정을 통해 현재의 지리정보 좌표계변환을 위한 노력을 시행하고 있다. 이러한 측면에서 본 연구에서는 세계측지좌표계 변환방법론, 변환사례 등을 검토 후 한국토지정보시스템 데이터를 대상으로 시범지역을 선정하여 변환실험을 실시하였다. 그 결과 변환 후의 데이터는 국가GIS활용 및 업무지원을 위한 참조적 데이터로서 충분히 이용이 가능한 수준으로 도출되었다. 하지만 한국토지정보시스템 데이터의 세계측지좌표계로의 변환을 위해서는 각 지역별 변환계수를 산정할 필요가 있으며, 지적데이터가 가지고 있는 다양한 원점을 통일원점으로 변환되어야 할 것으로 판단된다. 또한 마지막으로, 기존의 지적데이터가 가지는 다양한 문제점을 그대로 내포하는 수준으로 변환되었다. 따라서 한국토지정보시스템의 세계측지좌표계 변환을 위해서는 본 연구의 결과를 기초로 하여, 더 많은 대상지역에 대한 변환을 통해 오차와 오류의 유형별 원인 분석 후 한국토지정보시스템의 세계측지좌표계 변환의 체계적이고 계획적인 전략을 수립할 필요가 있다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.2 no.2 s.4
• /
• pp.143-151
• /
• 1994

3-D coordinates that result form GPS survey are not applied directly in korea because they are based on WGS 84 ellipsoid. Thus they must be transformed into longitude, latitude on the Bessel ellipsoid and orthometric height. Transformation parameters must be determined in order to perform the coordinate transformation. Also, coordinate transformation be preformed on longitude, latitude and ellipsoidal height. First estimation of Bessel geoidal height must be accomplished to acquire Bessel ellipsoidal height This paper suggests accuracy of coordinate transformation according to the estimation method of Bessel geoidal height. Also, This paper suggests that Bessel geoidal height have influence on the coordinates transformation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.149-158
• /
• 1998

The aim of this paper is to propose the technique of the two dimensional geodetic coordinates conversion between WGS84 and Bessel spheroids by the two-dimensional affine transformation modeling based on the UTM plane coordinates without the local geoid model which is essential to three dimensional coordinates conversion. Area of approximately $25\times{11}$ square km in the city of Inchon was selected as the test area. The transformation parameters were determined using the eleven triangulation control points in test area. And then, those paraneters were applied to the fifteen cadastral control points which selected as checking points for precision checking of transformation parameters. The average and standard deviations of the absolute values of the conversion residuals of checking points in latitude/longitude and N/E(UTM) and/or x/y(TM) are $\pm0.006"$$\pm0.013"$ and $\pm{17cm/}\pm{30cm}$ respectively. Also, coefficients for 7-parameters, 3-parameters and UTM model transformation computed according as sizes of transformed area, and then the transformed characteristics of checking points according to transformation methods analyzed synthetically.hetically.

• Journal of Cadastre & Land InformatiX
• /
• v.44 no.2
• /
• pp.139-153
• /
• 2014

The world geodetic system transformation of cadastral record have to minimize differences of boundary and area being in cadastral record according to transformation for that is direct connected with the land owner and property protection. However it is very difficult to accurately maintain the before and after transformation because coordinate transformation is generally using a mathematical conversion formula. At present, Helmert model by using 4-parameter is official coordinate transformation model for Cadastral Resurvey Project but scale factor is most sensitive to changes of area and relative position in the same parcel. In this study, it was proposed 3-parameter method using by scale factor fixing through the application of a Helmert in order to avoid changing the area difference and keeping the error within the tolerance range of the boundary which is related to the boundary point coordinate region.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.2
• /
• pp.141-148
• /
• 2007

With the use of world geodetic system, the UIS DB of WonJu City, which was established on Korea coordinate system becomes to face the need of coordinates transformation. However, the UIS DB of Wonju City is based on dualistic control points of Korea geodetic system, which means the coordinates system is not standardized. Therefore it is required to establish a plan for transformation into world geodetic system. For this purpose, we calculated coordinate transformation coefficients per control point data of Korea geodetic system and verified the accuracy of transformation coefficients. Through the process, we propose a plan for transforming the coordinate system of UIS DB in WonJu City, which has been based on dualistic control point data of Korea geodetic system, efficiently into the world geodetic system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.13 no.2
• /
• pp.153-162
• /
• 1995

The coordinate transformation both WGS84 and Bessel ellipsoids is essential to use of GPS in South Korea. Especially, for transformation considered the needed accuracy and the regional characteristics, the study about geoid modeling and the characteristics on the transformed area should be done. The aim of this study define the characteristics of the transformed coordinates according to transformation methods and the area measured by GPS. For this, large network that include South Korea, four regional network consist of large network, and local net-work include Incheon city designed. Geoid model based on Bessel suitable to South Korea selected from study about the effects of the assumed geoid height at the geodetic origin, and then coefficients computed according as transformed area and methods. Also, the transformed characteristics of the large coefficients, the regional coefficients, and the local coefficients according to methods compared, analyzed synthetically.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.281-288
• /
• 2009

In the paper, we try to develop the methodology for updating road networks of large-scale digital maps by using construction drawing data. For the purpose, it is pre-requite step to merge road networks detached in CAD drawing data. As such, tie points are identified in neighboring drawings and used for solving the parameters of 2D conformal transformation between drawings. Then, the merged road network in CAD data is transformed to the coordinate system of digital maps. In the process, IPs in the drawings are considered as control information and 2D affine transformation is selected for coordinate transformation. Through the experiments with real dataset, we can identify that the developed method is valid and generally applicable.