• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.534-546
• /
• 1990

In this work, an optimum shape synthesis for rolling contact components was done to minimize contact forces considering dynamic characteristics of the system. Even this method was applied to an OHC type cam follower system, it can be expanded to general rolling contact shape design problems which are strictly forced to follow predetermined motion. First, the follower optimum angular motion was derived to minimize the valve peak acceleration while satisfying all the constraints of valve motion. Then the cam and follower contact shape were synthesized to give the proposed follower motion. Theoretically, two components shape to generate a predetermined motion can not be uniquely determined. So the cam shape was syntehsized with parametric synthesis method to minimize the peak contact force between cam and follower when the follower shape is assumed as a circle or an ellipse.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.4
• /
• pp.184-192
• /
• 2001

Cam/tappet wear is one of the critical concerns in valve train deign. Maximum contact stress and minimum oil film thickness between the cam and tappet are usually checked for the estimation of wear characteristics. If the two extreme cases arise simultaneously, there is a strong possibility of cam/tappet wear. In this paper, effects of valve train layout on the wear characteristics were studied. Especially for swinging arm type valve trains, initial geometric layout must be very carefully defined to avoid wear problems. The study was performed fur an end pivot type OHC valve train, which had severe wear problems. Analysis results show that some geometric parameter affect very sensitively on the wear characteristics. Experiments were also performed for the original and modified valve trains, which strongly support the analysis results.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.11
• /
• pp.2049-2058
• /
• 1992

In this work, a 6 degree of freedom lumped mass model is constructed for an OHC-type cam valve train analysis, and the model is verified experimentally. Using the verified model, an optimum cam profile is designed to minimize the maximum contact force between cam and follower under the constraints such as cam lift and cam event angle. The designed cam was carefully machined and tested experimentally. As operating the designed cam shaft on the test rig, the valve motion was precisely measured with laser displacement meter and the contact force was indirectly monitored by measuring strain at a certain point of the finger follower. Judging from the model simulation and experiment results, the maximum contact force can be reduced as much as more than 16.7 percent under maintaining the original valve flow area by adopting the optimum cam profile.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.05a
• /
• pp.189-190
• /
• 2001

대농갱이, Leiocassis ussuliertsis는 분류학상 메기목(Order Sluriformes), 동자개과 (Family Bagridae)에 속하는 종으로 전장이 50 cm에 이르는 대형 종이며 한강과 금강 등 우리 나라의 각종 하천에 서식하며 북한과 중국, 러시아에도 분포한다(In and Kim, 1990). 본 종은 매운탕으로 기호도가 높은 중요 식용어이나 근래 자연 자원의 감소와 수요의 증가로 양식의 필요성이 점차 요구되고 있다. (중략)

• Korean Journal of Ichthyology
• /
• v.13 no.2
• /
• pp.93-99
• /
• 2001

Skin mucous cells in the three regions of the body in Pseudobagrus fulvidaraco and Leiocassius nitidus were investigated using three histochemical methods (PAS, AB-PAS and HID). In the two species, components of mucous cell were not distinguished in each region, but presented a differences in position and type, size, and count in all regions. Mucous cells of P. fulvidraco were located in two layers, a superficial epithelial cell and the space within alarm substance cells (ASCs). Mucous cells of L. nitidus were situated only in the superficial epithelial cell layer. The size of mucous cells in the ASC layer were larger than those of the superficial epithelial cells for all measured values: diameter, length, width, and area. In the superficial epithelial cell layer, the average number of mucous cells within the three regions did not differ significantly between species by unpaired T-test, but the average number of those within two cell layers of P. fulvidraco had a similarity at each region by paired T-test. The dismilarity in dorsal and ventral regions in average number of ASCs between P. fulvidraco and L. niditus was confirmed by unpaired T-test.

• Korean Journal of Ecology and Environment
• /
• v.33 no.4 s.92
• /
• pp.405-412
• /
• 2000

The fine structure of spermatozoa of Leiocassis ussuriensis was examined with scanning and transmission electron microscopies. The spermatozoon of L. ussuriensis is approximately $68.8\;{\mu}m$ in length and a relatively simple cell with a spherical nucleus, a short midpiece and a tail. The ultrastructure of spermatozoa of L. ussuriensis is characterized by the following features. The nuclear fossa, the length of which is about two-thirds of the nuclear diameter, contains two centrioles. The centrioles are orientated approximately $180^{\circ}$ to each other. The mitochondria are arranged in two layers and their number is 12 or more. The axoneme is the 9+2microtubular pattern and has inner but no outer dynein arms as in other bagrids. The two axonemal fins are in the same plane with the two central microtubules, the doublets 3 and 8. The axonemal fins and the inner dynein arm are shared in Bagridae and the deep nuclear fossa is shared in Siluriformes. The axonemal finsobse observed in Bagridae and Amblycipitidae of Siluriformes might be the apomorphic character in Ostariophysi. They are not reported in Cyprinidae and Characiformes.

• Journal of Marine Life Science
• /
• v.8 no.2
• /
• pp.115-120
• /
• 2023

This study aims to find out a suitable extender and cryoprotective agent (CPA) for cryopreservation and its optimum concentration in order to conduct planned artificial seed production of Korean bullhead Pseudobagrus fulvidraco and to preserve superior sperm. Experiments were designed to investigate the effects of the different combinations of three extenders (I: 300 mM glycose, II: Kurokura extender, III: Li extender), four cryoprotectants (dimethyl sulfoxide, ethylene glycol, methanol and glycerol) and four concentrations (5, 10, 15, 20%) on the cryopreservation of Korean bullhead sperm. Postthawed sperm survival rate and sperm activity index (SAI) were detected to evaluate the effects of sperm cryopreservation. The optimal combination of extender and CPA for cryopreservation of Korean bullhead sperm was extender III + 10 and 15% methanol, resulting in a survival rate and SAI of 66.9 ± 8.7, 67.3 ± 13.1% and 2.6 ± 0.4, 2.6 ± 0.5 respectively, which was higher than had been achieved with other extenders and CPAs.

• Journal of fish pathology
• /
• v.8 no.2
• /
• pp.81-90
• /
• 1995

One new and one the first recording digenetic trematodes are described from Korean freshwater fishes : Orientocreadium koreanum sp. nov. from Liobagrus andersoni Regan (Korean torrent catfish) and O. psedobagri Yamaguti, 1934 from Pseudobagrus fulvidraco (Richardson) (Korean bullhead). The problems of the family Orientocreadiidae and the major identifying characters of O. koreanum are discussed.

• Korean Journal of Ichthyology
• /
• v.2 no.2
• /
• pp.117-137
• /
• 1990

The morphological characters of the family Bagridae living in the river systems flowing into the south and western seas of Korea were reviewed and a taxonomic revision was made. The family Bagridae was classified into two genera: Pseudobagrus and Leiocassis. Species corresponding to genus Pseudobagrus were P. fulvidraco, P. koreanus Uchida, sp. nov., P. brevicorpus, and genus Leiocassis were L. nitidus, L. ussuriensis, and L. longirostris. Among them Pseudobagrus koreanus Uchida, sp. nov. and P. brevicorpus are endemic species of Korea. As the intergeneric taxonomic characters, the outstanding morphological differences between genera Pseudobagrus and Leiocassis were distinguished in following characters; the serrated structure of pectoral spine, the length of barbels, the number of pectoral fin rays, the structure of cranial lateral line system and the fused state of 3-4 hypurals. Pelteobagrus fulvidraco and Coreobagrus brevicorpus recorded previously in Korea were classified as Pseudobagrus fulvidraco and P. brevicorpus, respectively. Pelteobagrus nitidus and Pseudobagrus ussuriensis are also changed to genus Leiocassis. The characters of interspecific classification belonging to genera Pseudobagrus and Leiocasis were the shape of caudal fin, the form of body, the length of body, the number of anal fin ray and the number of gill rakers. Pseudobagrus sp. was named into Pseudobagrus koreanus Uchida, sp. nov..

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.39 no.3
• /
• pp.56-64
• /
• 2021

Pavilion is an important landscape installation in the traditional landscaping and a representative facility that organizes space. To interpret and succeed the traditional landscape space, researches on the shape and structure of the traditional pavilion are also needed. However, researches on the style and structure of the traditional pavilion are difficult to be found. Accordingly this study aimed to identify the structural characteristics of roof part that occupied the largest portion in determining the shape of pavilion. Our research findings are as follows. As a result of analyzing 15 traditional Single-room square pavilions whose structure could be identified, it was found that the main building elements that distinguished the type of roof part in the Single-room square were crossbeam, ridge pole, and baluster. Depending on the presence of roofing members, pavilion was classified into five types: crossbeam, crossbeam+ridge pole, crossbeam+baluster, ridge pole, and baluster. In addition, as a result of analyzing the load and joint that worked on crossbeam based on the shape classification of roof part, it was found that in the traditional Single-room square pavilion, crossbeam was designed to play a balancing role between pillar and load. This study is significant in that it attempted to make a close interpretation of the shape of roof part in the pavilion and the role and function of building elements in terms of size, ratio, and load.