• Journal of the Korea Concrete Institute
• /
• v.15 no.5
• /
• pp.679-688
• /
• 2003

For box girders in which the longitudinal tendon is profiled in the inclined webs, longitudinal prestressing force will induce transverse effects as well as longitudinal ones. In this paper, the method to estimate transverse effects induced by longitudinal prestressing is proposed. The concept of transverse equivalent loading which is calculated through longitudinal prestressing analysis is developed. The transverse stress in slabs of box girders due to longitudinal prestressing are investigated. The comparison of numerical results of the proposed method and those of folded plate method represents that the method is reasonable. Numerical analyses are carried out depending on the parameters such as web inclination and ratio of girder length to tendon eccentricity. Analysis results show that when only prestressing are considered the magnitude of transverse stress in slabs of box girder is not so large. However, if the other stresses due to dead and live load et al. are superposed on these stresses, it may be that the longitudinal prestressing effects are significant.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.3
• /
• pp.49-55
• /
• 2010

In this paper, the stability of cracked cantilever T-beams subjected to subtangential follower force is investigated. Also, the effect of subtangential coefficient and crack on the natural frequency of T-beams is presented. Based on the Euler-Bernoulli beam theory, the equation of motion is derived by the energy expressions using extended Hamilton's Principle. The crack is assumed to be in the first mode of fracture and to be always opened during the vibrations. The values of critical follower force and the stability maps of cantilever T-beams are obtained according to the subtangential coefficient and crack severity. The results of this study will contribute to the safety testing and the stability estimation of cracked T-beams subjected to follower force.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.12
• /
• pp.1327-1334
• /
• 2008

In this paper, the purpose is to investigate the stability of cracked Timoshenko cantilever beams subjected to subtangential follower force. In addition, an analysis of the instability(critical follower force of flutter and divergence) of a cracked beam as slenderness ratio and subtangential coefficient is investigated. The governing differential equations of a Timoshenko beam subjected to an end tangential follower force is derived via Hamilton's principle. The crack is assumed to be in the first mode of fracture and to be always opened during the vibrations. The results of this study will contribute to the safety test and stability estimation of structures of a cracked beam subjected to subtangential follower force.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.612-612
• /
• 2012

최근 GIS를 이용하여 수리 수문학적인 지형인자를 생성할 수 있는 Arc Hydro 등의 다양한 GIS 기반 툴들이 개발되어 왔다. 예를 들어 Arc Hydro는 격자형 고도자료인 수치표고모델(Digital Elevation Model)을 통해 수자원에서 필요로 하는 유로연장, 유역경사 등의 지형인자를 산정할 수 있는 기능을 제공해 주고 있다. 하지만 기존의 GIS 기반 툴에서는 Manning의 평균유속 공식 등 하천수리학에서 매우 중요한 인자인 하천경사를 하천망을 따라 산정하고 표출하는 기능이 부족하였다. 또한 하천경사 산정에 사용되는 여러 GIS 툴을 통해서 제공되는 셀 경사 등 지형인자들의 기계적인 적용으로 정확한 하천경사의 산정에 문제가 있어왔다. 본 논문은 이러한 지형인자들의 적용성을 평가하고 다양한 이론적 하천경사 산정법을 GIS 상에 적용하여 상호 비교하여 최적화된 하천경사 산정방법을 제시하고자 한다. 연구 대상유역으로는 제주도를 선정하였으며, 대상 하천은 Arc Hydro를 이용하여 산정된 하천망의 형태를 수자원관리정보시스템(WAMIS), 위성사진 등과 비교한 후 시범 하천(한천)을 선택하여 여러 하천경사 산정법을 적용해 보았다. 적용된 산정법은 총 4가지로 첫 번째 방법은 수치표고모델의 주변 표고를 고려하여 산정된 기울기를 Arc Hydro를 이용하여 산정된 하천을 따라 산술평균하는 방법이며, 나머지 3가지 방법은 하천망을 따라 흐름방향의 거리와 수치표고모델의 표고를 수집한 후에 단순경사방법, 등면적경사방법, 등가경사방법에 적용하는 방법이다. 산정된 하천경사를 상대비교를 하여 대상유역에 대한 비교검토를 실시하였다. 모든 과정은 프로그램 개발을 통해 자동화 시켜 향후 다른 유역의 적용과 변화 가능한 지형정보를 신속하고 효율적인 예측을 가능할 수 있도록 하였다. 또한 주어진 하천망의 두 지점 사이의 종방향 경사를 산정하여 표출하는 기능을 추가하여 하천 경사의 표출방식을 향상시켰다. GIS를 이용하여 산정되어진 하천경사의 적용성이 충분하다면 Manning의 평균유속 공식에 적용할 수 있을 뿐만 아니라 다양한 하천분석이 용이해 질 것으로 예상된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.236-236
• /
• 2018

한국농어촌공사 농어촌연구원에 구축되고 있는 대형 수리모형 실험시설은 수공구조물에 대한 수리모형실험 수행, 설계기준 제 개정, 호안 검인증제도 지원 등 국가의 정책지원과 개방 공유를 통한 국내 건설기업의 하천분야 신기술 개발 및 국가 경쟁력 확보, 하천 관련 원천기술 확보 등 다양한 목적을 가지고 진행되고 있는 대규모 분산공유형 실험시설에 해당한다. 본 사업의 일환으로 현재 구축 진행되고 있는 7종의 실험수로는 장기하상변동, 토석류, 실규모 호안블록, 감세공 수리특성, 신형어도개발 등 다양한 수리특성에 대한 계측 및 분석이 가능한 대형 실험시설에 해당한다. 7종의 실험수로는 PIV시스템의 연계 계측이 가능한 1) 고정식개수로, 2) PIV실험수로와 1/5의 역경사 재현이 가능한 3) 가변식경사수로, 호안블록 및 사석의 소류력 측정이 가능한 4) 고정식급경사수로, 토석류흐름 측정이 가능한 5) 가변식하도실험수로, 장기하상변동 분석을 위한 6) 대형유사순환수로, 부유사의 침 퇴적 양상 재현을 위한 7) 소형유사순환수로로 구성되어진다. 7종의 실험수로는 '18년 2월에 착공하여 현재 실시설계도서를 검토 중에 있으며, 18년 9월에 준공될 예정이다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.11 s.104
• /
• pp.1287-1294
• /
• 2005

The purpose of this paper is to investigate free vibrations and critical loads of the Beck's columns with a tip spring, which carry a tip mass. The ordinary differential equation governing free vibrations of Beck's column subjected to a follower force is derived based on the Bernoulli-Euler beam theory Both the divergence and flutter critical loads are calculated from the load-frequency corves that are obtained by solving the differential equation numerically. The critical loads are presented in the figures as functions of various non-dimensional system parameters such as the subtangential parameter, mass ratio and spring parameter.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.4
• /
• pp.377-386
• /
• 2021

In dense cities, which are covered by many impermeable areas, rainwater flows quickly along the roads and collects in certain areas. The surface runoff that fails to get intercepted by the roadside rain gutters results in a wider flow of water along the sides, which in turn increases the amount of water on the road and causes traffic congestion as well as accidents due to slippage. Based on these issues, this study was carried out in order to propose an intercepted flow calculation formula. To this end, the maximum longitudinal slopes of arterial roads and expressways were reflected to depict a road condition of 2~10 %, while a general traverse slope of 2 % was selected for the traverse slope on the side. As for the road lane condition, two, three, and four lanes were chosen for the area from the centerline to the sidewalk. As for the experimental flow rate, the rainwater runoffs at the actual design frequency of 5, 10, 20, and 30 years for road conditions were converted into experimental flow rates, and as a result, flow rates ranging from 1.36 l/s to 3.96 l/s were divided into ten flow rates for a hydraulic experiment. Also, an equation taking into consideration the inflow velocity and flow width along the roadsides was proposed. The results of the experiment showed an increase in flow width and a decrease in interception rate. Also, the inflow velocity at a traverse slope of 2 % was measured, while increasing the longitudinal slope. Accordingly, an equation for calculating the flow intercepted by rain gutters at a flow width reflecting the longitudinal slope of the road and rainwater runoff, according to the design frequency, was derived by performing a regression analysis using IBM SPSS Statistics 24. It is deemed that the equation derived in this study will be useful in designing rain gutters for roads.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2B
• /
• pp.179-186
• /
• 2006

Effective interception area of street grate inlets was decreased by clogging with trash, debris, and sand. It also decreased the interception capability of grate inlets and increased the inundation area in street. Therefore, it is necessary to analyze the clogging characteristics and interception capability change by clogging for appropriate design and management of grate inlets. Hydraulic experimental apparatus which can be changed the gutter transverse slopes, longitudinal slopes of street and clogging condition of grate inlet ($40{\times}50cm$) was installed for this study. 81 total experiments were conducted with 8 different clogging condition. The interception capacities of grate inlets clogged curb direction are smaller than those of clogged flow direction. As the longitudinal slopes of street increase, the interception capacity of grate inlet decreases due to splash-over phenomena. This is also observed at grate inlets which has no clogging condition. In general, 50% of clogging factor was selected in design of grate inlet in foreign country. The clogging factor for same clogging condition are suggested 0.25~0.65 in domestic urban area.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.6 s.79
• /
• pp.699-705
• /
• 2005

This paper investigates critical loads of tapered cantilever columns with a tip mass, subjected to a follower force. The linearly tapered solid rectangular cross-sections are adopted as the column taper. The differential equation governing free vibrations of such columns, also called Beck's columns, is derived using the Bernoulli-Euler beam theory. Both divergence and flutter critical loads are calculated from the load-frequency curves that are obtained by solving the differential equation. The critical loads are presented as functions of various non-dimensional system parameters, namely, the taper type, the subtangential parameter, and the mass ratio.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.4
• /
• pp.230-240
• /
• 2020

The aim of this study was to investigate the manoeuvrability of a ship in different Center of Gravity (CG) conditions. Free Running Model Tests (FRMT), such as 35°turning circle tests, 20/20 zigzag manoeuvring tests, and 10/10 zigzag manoeuvring tests, were conducted in three GM and three trim conditions with 1/65.83 scaled KRISO Container Ship (KCS). The test results indicated that KCS in the lower GM condition and the trim by bow condition showed reduced advance and tactical diameter in turning circle tests and increased overshoot angles in zigzag tests, and those manoeuvring indices were strongly related with roll angle. In addition, sensitivity indices for three-axis CG position were suggested with prior research, and it showed that y-axis CG position significantly affected manoeuvrability of KCS due to the low GM. Therefore, in the case of KCS, it is evident that the roll angle during manoeuvre is closely related with manoeuvring indices.