• Bulletin of the Society of Naval Architects of Korea
• /
• v.21 no.4
• /
• pp.40-48
• /
• 1984

The computer program DASH(Direct Analysis of Ship's Hull), based on the direct calculating procedure as proposed at the 4th ISSC(1970), was developed. The DASH program is designed by the following calculation procedure: 1) Derivation of the design wave loads through the ship motion analysis based on the strip theory. 2) Stress analysis of the hull girder based on the 7-degree of the freedom beam theory including the warping torsion effect. 3) Long-term prediction of the stresses based on the statistical approach using sea-spectrums and ocean wave data in the ship's route. An example calculation was performed for the purpose of a demonstration of the present approach on the 16,200 DWT Oil Tanker. The results are discussed and compared with the conventional method.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.2
• /
• pp.83-93
• /
• 1998

The twin aims of the present study are to develop a PC program for the statistical analysis of the measured cohesion data and to suggest a probabilistic corrosion rate estimation model for longitudinal members of tanker structures. A data analysis for the corrosion rate statistics(i.e., mean, standard deviation) as a function of the corrosion parameters is established for various structural member categories/locations of interest. Development of the computer program is focused on possible operation together with future addition of more corrosion data as they become available. To investigate the influence of the corrosion protection scheme a series of the corrosion analysis varying the life of coating are carried out and several different corrosion models as a function of time are suggested depending on the coating life.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1991.07a
• /
• pp.89-92
• /
• 1991

선형파 이론 자체로서는 쇄파대내에서의 파고를 직접 계산할 수 없으므로 쇄파가 발생하기 전까지만 계산할 수 있다. 그리고 쇄파대내에서의 파고는 수심에 대하여 일정한 비율로 감소시켜 해석해 왔다. 그러나 쇄파가 발생한 후의 파고는 선형적으로 감소하지 않고 해저경사에 따라서 그 감소경향이 다르게 나타남을 여러문헌에서 알 수 있다.(중략)

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.2
• /
• pp.94-103
• /
• 1998

Recently, many researches are carried for high-speed and light craft. In this study, the optimum structural design procedure and the computer program are developed to minimize the hull weight of SES(Surface Effect Ship) built of composite materials. Three types of composite materials-Sandwich, Single Skin and Hybrid type- are considered and the efficiency of each type is investigated. In design process, the optimum design of main members is performed at first considering longitudinal strength. And then, the transverse member design is performed considering torsional strength SSDP(Structural Synthesis Design program) of U.S. Navy is adopted for design algorithm and DnV classification nile for design loads and strength criteria. For optimum structural design, ES 1+1 optimization technique is used.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.1
• /
• pp.118-126
• /
• 2000

An optimum structural design system for double hull oil tankers is developed based on the generalized slope deflection method which was previously proposed by the authors. For the optimization technique, the Hooke & Jeeves direct search method is applied to the minimum weight design problems with discrete design variables. A minimum weight design program is developed for the longitudinal members by the classification rules and for the transverse frames and the bulkhead members by the generalized slope deflection method. By this program, a minimum hull weight design of double hull oil tankers considering tank arrangement is performed and the design results are compared with existing ship. It is possible to find optimum tank arrangement and efficient types of hull structures for the minimum weight design of double hull oil tankers.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.30 no.2
• /
• pp.31-43
• /
• 1993

본 연구에서는 힁부재가 없는 AFRAMAX급 신구조 방식의 유조선을 개발하고자 하였다. 설계의 기본 개념은 1) 이중선체구조를 채용하여 해난사고 발생시 기름유출 방지를 피하고, 2) 힁부재가 없는 극히 단순한 선체구조를 채용하여 용접 로봇등을 활용한 자동건조 비율을 높임으로써 건조 생산성을 향상시키는데 주안점을 두고 있다. 설계 결과 얻어진 선체구조는 기존의 유조선 구 조와 매우 상이하다. 초기구조설계단계에서 구조 부재의 치수는 기존의 선급설계 지침을 활용 하여 결정하였으나, 기존의 유조선 구조와 비교하여 구조배치가 크게 바뀌어 졌기 때문에 기존의 선급설계지침을 만족했다고 해서 구성부재와 국부구조뿐만 아니라 구조 전체적으로도 충분한 구조안전성을 가지고 있는지는 확실치 않다. 따라서 직접구조해석에 의한 구조안전성 평가가 필수적으로 요구되며, 이를 위해 저자들은 선체구조의 최종 종강도(ultimate longitudinal strength), 최종 힁강도(ultimate transverse strength) 및 최종 국부강도(ultimate local strength )를 기준으로한 구조안전성 평가를 수행하였다. 본 논문에서는 이들 중에서 국부 구조부재에 대한 안전성평가 문제만을 다루었다. 결론적으로, 본 연구에서 개발한 선체구조는 건전상태(intact condition)하에서 뿐만 아니라 손상상태하에서도 구조부재는 좌굴 또는 붕괴하지 않고 전반적 으로 충분한 구조안전성을 가지고 있다는 결론을 내릴 수 있었다.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.2
• /
• pp.94-104
• /
• 1999

Plate buckling is very important design criteria when the ship is composed of high tensile steel plates. In general, the plate element contributes to inplane stiffness against the action of inplane load. If the inplane stiffness of the plating decreases due to buckling including the secondary buckling, the flexural rigidity of the cross section of a ship's hull also decreases. In these cases, the precise estimation of plate's behaviour after buckling is necessary, and geometric nonlinear behaviour of isolated plates is required for structural system analysis. In this connection, the author investigated the geometric nonlinear behaviour of simply supported rectangular plates under uniaxial compression in the longitudinal direction in which the principle of minimum potential energy method is employed. Based on the energy method, elastic large deflection analysis of isolated palate is performed and simple expression are derived to discuss the bifurcation paint type buckling and limit point type buckling.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.4
• /
• pp.255-261
• /
• 2013

This paper presents prediction of ultimate longitudinal strength of a VLCC, "Energy Concentration" for which many benchmark studies have been carried out, based on kinematic displacement method proposed by Tayyar and Bayraktarkatal (2012). Kinematic displacement theory provides semi-analytical solution of average compressive strengths for various kinds of stiffened panels. The accuracy of average compressive strengths obtained from formulas of CSR(common structural rules) for tankers and kinematic displacement method are discussed in the fore part of this paper. Hull girder ultimate strengths using Smith method are also compared for different average compressive strengths. By comparing them with other benchmark results, it is concluded that the new method provides lower bounds, because hull girder strengths under the sagging and hogging moment conditions approach nearly lower bounds.

• Korean Journal of Metals and Materials
• /
• v.50 no.6
• /
• pp.427-432
• /
• 2012

This paper presents the material properties of carbon steels for ships, and offshore structures (ASTM A131) are tested under a series of arctic and cryogenic temperature conditions. For material tension tests, among the ASTM 131 steels, Grades A and B of mild steel and Grade AH of high tensile steel have been used. The obtained mechanical properties of the materials from the material tension tests were applied in a 13,000TEU class container ship to define the effect of low temperature on the ultimate longitudinal strength of the target structure by using the ALPS/HULL intelligent supersize finite element method. The tensile coupon test results showed increased strength and nonuniform fracture strain behaviors within different grades and temperatures. Increasing the material strength resulted in increasing the ultimate longitudinal strength of the ship.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.11 no.2 s.23
• /
• pp.77-82
• /
• 2005

Previously sailing yachts or leisure yachts were mainly made from FRP(Fiber glass reinforced plastic) in the small shipbuilding, but recently there is a trend to replace it for steel or aluminum to substitute FRP for environmental friendly materials. Although It have to need a many checked item in case of hull girder strength and transverse strength normally evaluate base on calculation of class guideline so called direct calculation method. Otherwise. this method of initial structural design considered enough for safety margin on the structure. But, case of small craft must consider for evaluating local strength through rational method. In this paper, check the bow structure members for satisfying results base on allowable stress criterion of damaged bow structure by dynamic load due to slamming and bottom impact load due to pitching motion through finite element analysis. and investigate engine bed structure considering engine weight load and transverse wave load.