• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.4 s.142
• /
• pp.315-321
• /
• 2005

The effect of water depth on the wave making resistance performance is great where Froude number based on the water depth is close to one. The increase of wave making resistance due to the shallow water effect is evaluated by a numerical analysis in the present study. Three-dimensional Navier-Stokes and continuity equations are employed for the present study and the equations are discretized by finite difference method. The interface between water and air is determined by the level set method. In order to validate the numerical method, the change of resistance performance for Wigley hull according to the water depth is evaluated and the computed resistance coefficient is compared with measured one. The present numerical method is applied for the simulation of wave phenomena around a Ro-Pax hull form and the computed results are discussed in the resistance performance point of view.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.4
• /
• pp.14-26
• /
• 1989

This paper describes the method of statistical analysis and its programs for predicting the ship's powering performance. The equation for the wavemaking resistance coefficient is derived as the sectional area coefficients by using the wavemaking resistance theory and its regression coefficients are determined from the regression analysis of the model test results. The equations for the form factor, wake franction and thrust deduction fraction are derived by purely regression analysis of the principal dimensions, sectional area coefficients and model test results. The statistical analyses are performed using the various descriptive statistic and stepwise regression analysis techniques. The powering performance prognosis program is developed to cover the prediction of resistance coefficients, propulsive coefficients, propeller open-water efficiency and various scale effect corrections.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.4
• /
• pp.296-308
• /
• 2001

A fully nonlinear Boussinesq equation of Wei et al. is finite differenced by Adams predictor-corrector method. A spatially distributed source function and sponge layers are used to reduce the reflected waves in the domain and wale breaking mechanism is included in the equation. The generated waves are found to be good and the corresponding wale heights are very close to the target values. The shoaling of solitary wave and transformation of regular wave over submerged shelf were simulated successfully. The characteristics of breaking mechanism was identified through the numerical experiment and the results of two dimensional wave propagation test over the spherical shoal showed the importance of nonlinear wave model.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.1
• /
• pp.35-41
• /
• 2008

Overtopping wave energy convertor is an offshore wave energy convertor for collecting the overtopping waves converting the water pressure head into electric power through the hydro turbines. This paper presents a numerical wave tank based on the commercial CFD code Fluent. The Reynolds Averaged Naiver-Stokes and VOF model is utilized to generate the 2D numerical linear propagating waves, which has been validated by the analytical solutions. Several incident wave conditions and shape parameters are calculated in the optimal designing investigation of the overtopping characteristics and discharge for the overtopping wave energy convertor.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.6 s.73
• /
• pp.67-74
• /
• 2006

A high-order spectral/boundary-element method is newly adapted as an efficient numerical tool. This method is one of the most efficient numerical methods by which the nonlinear gravity waves can be simulated and hydrodynamic forces also can be calculated in time-domain. In this method, the velocity potential is expressed as the sum of surface potential and body potential. Then, surface potential is solved by using the high-order spectral method and body potential is solved by using the high-order boundary element method. By the combination of these two methods, the wave-making problems by a submerged sphere oscillating with large amplitude under the free~surface are solved in time-domain. Through the example calculations, nonlinear effects on free-surface profiles and hydrodynamic forces are shown and discussed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.477-477
• /
• 2011

본 연구에서는 연안내 오염물질 이동 및 확산 특성을 파악하기 위하여 실내조파모형장치를 제작하고 Nacl을 이용한 염료실험을 실시하였다. 제작된 실내조파모형장치를 이용하여 재현된 조석파는 주기 2초, 파고 3cm의 일정한 주기와 파고를 형성하는 규칙파로 재현하였다. 또한 반사파의 영향을 최소화하기 위하여 상류단에 감쇄역을 설치하였으며 유속의 변화에 따른 염료의 이동 확산특성을 분석하기 위하여 동일조건에서 유속변화를 달리하여 2회 실험하였다. 또한 추적자로 사용된 Nacl은 실험전 일정한 농도로 희석하여 사용하였으며 추적자의 실시간 농도관측을 위하여 세창인스트루먼트 제품 CPC-401(휴대형 다항목 측정장치)을 방출지점에서 일정한 간격으로 4개 지점에 설치하여 1초간격의 농도데이터를 수집하였다. 수집된 CPC-401의 농도데이터 분석결과 염료의 이동 방향은 방출지점에서 하류단 지점으로 이동하였으며 유속의 변화에 따른 최대농도 값의 변화는 적었으나 염료의 지속시간 변화는 뚜렸하게 나타났다. 이는 난류확산 보다는 유속 변화로 인한 이류가 크게 작용함을 알 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.90.1-90.1
• /
• 2011

This technology is applicable to Electrical vehicle that using Energy from Hydrogen Fueled Cell. Electricity & water is got from chemical reaction between H2 & O2 in stack. This technology is used when fault diagnosis of Fuel cell is needed. It is General method that measure each cell's voltage of stack for fault diagnosis. but, this technology is method of measuring entire voltage of stack. For this reason, fault diagnosis system is simplified and cost of system is lower than previous one. In normal stack condition, characteristic graph of voltage-current has linearity. In fault stack condition, it has non-linearity. we use this characteristic to diagnosis of stack fault. In this technology, Specific frequency current is injected into stack & Stack voltage is measured in response. After that, stack voltage difference is analyzed to diagnosis of stack fault. Presently, Development of current injection module & basic program of THDA is finished. in future we will develop the technology of precise measurement technology about entire stack voltage.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.4
• /
• pp.362-365
• /
• 1984

Application of phosphate and silicate at the seed bed stage of rice seedlings was investigated to improve nutritional condition and rooting capability at low temperature. The amounts of applied phosphate were 15kg/10a with or without 200 kg/10a of silicate, and 30 kg/10a without silicate. Seeding dates were March 31, April 9 and April 19. The dry weight of the seedlings seeded earlier date under low temperature was lower than that of the seedlings seeded later dates. The application of phosphate and silicate increased the dry weight of newly developed roots after trasplanting, and increased the number of tillers. Therefore, heavy application of phosphate and silicate is recommendable to improve the predisposition of the rice seedlings grown under the low temperature condition for early transplanting.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.19 no.2
• /
• pp.125-129
• /
• 1983

It is customary to assume that the resistance of a jull at uniform speed may be regarded as the sum of viscous and wavemaking component resistance, or C sub(i)=C sub(v)+C sub(w), where C sub(v) is regarded as a function of Reynolds Number R and C sub(w) a function of Froude Number F. Formulae have been obtained for ∂C sub(w)/∂R, ∂C sub(v)/∂F which may be relevant in seeking theoretical grounds for possible interaction between viscous and wavemaking component resistances. The values of ∂C sub(w)/∂R are small. In general they are smaller than corresponding values of ∂C sub(v)/∂R. But although these values are small it does not follow that they are entirely negligible. The Froude assumption that the rate of change of C sub(w) with R is zero must bel regarded as incorrect.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.2
• /
• pp.66-72
• /
• 1992

A computational method of the Michell integral for water of finite depth is developed and the method makes use of the expansion of the hull form by the Legendre polynomial in both the longitudinal and the vertical directions. The wave resistance coefficient is given as a quadruple summation of the product of the shape factor and the hydrodynamic factor. The shape factor depends only upon the geometry of the hull form, and the hydrodynamic factor upon the depth-based Froude number and the ratios of the water depth and the draft to the ship length. Example calculations are done for the Wigley parabolic hull and the Series 60 $C_B$ 0.6, and the comparison of our results with the existing experimental data is shown.