• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.12
• /
• pp.1229-1235
• /
• 2015

Scaffold fabrication technology using a 3D printer was developed for damaged bone tissue regeneration. A scaffold for bone tissue regeneration application should be biocompatible, biodegradable, and have an adequate mechanical strength. Moreover, the scaffold should have pores of satisfactory quantity and interconnection. In this study, we used the polymer deposition system (PDS) based on fused deposition modeling (FDM) to fabricate a 3D scaffold. The materials used were polycaprolactone (PCL) and alginic acid sodium salt (sodium alginate, SA). The salt-leaching method was used to fabricate dual pores on the 3D scaffold. The 3D scaffold with dual pores was observed using SEM-EDS (scanning electron microscope-energy dispersive spectroscopy) and evaluated through in-vitro tests using MG63 cells.

• Journal of Biomedical Engineering Research
• /
• v.25 no.3
• /
• pp.201-206
• /
• 2004

The bone formation and re-formation are regulated by two factors that are the synthesis of bone matrix by osteoblast and reabsorption by osteoclast. Recently, there are many studies about regeneration and healing of bone tissue by activation of osteoblast. In general, it is known that the activation of osteoblast is influenced by not only biological stimulus but physical stimulus. In this study, we verified that ostoeblast activation was influenced by low intensity ultrasound. Various ultrasonic properties were used to find out the most appropriate condition on cell activation. From this study, we could confirm that 0.3W/$\textrm{cm}^2$ intensity of ultrasound was the most appropriate to tell activation over whole duty cycles and the increasing rate of tell was the highest at 50％ duty cycle. Thus, it is expected that optimal ultrasonic characteristics on regeneration of bone matrix may be applied to fracture and osteoporosis healing.

• Journal of Plant Biotechnology
• /
• v.35 no.1
• /
• pp.47-53
• /
• 2008

Effects of growth regulators and culture conditions on seed germination, haustorium development, and callus formation of Korean mistletoe (Viscum album var. coloratum (Kom.) Ohwi) were described. Histological examination showed that seed of V. album contained one or two zygotic embryos with rod shape, and actively dividing cells were mainly distributed in radicle region rather than cotyledon of zygotic embryo. The most significant factor for seed germination and haustorium development of V. album was the requirement of the light. Various growth regulators examined in this study failed to substitute the effect of the light on seed germination. The frequency of callus formation was highest at 27.3% when flower buds were cultured onto B5 medium containing $0.1\;mgl^{-1}$ IAA. Explants from other organs were recalcitrant in forming calluses. Culture conditions described in this study could be applied for production of useful metabolites and multiplication of V. album in future.

• Journal of Plant Biotechnology
• /
• v.30 no.4
• /
• pp.315-321
• /
• 2003

Freezing and drought tolerances in plants are very important for survival in the desert. In an effort to reduce desertifcation in Gobi, a molecular breeding of Artemisia adamsii using the CLP (chitinase like protein, antifreeze protein) and Dhn5 (dehydrin5) genes from barley is performed by introducing them into Artemisia adamsii via Agrobacteria. We had found an optimal combinatorial concentration of hormones at 0.05mg/L of NAA and 0.5mg/L of BA for growth of callus in Artemisia adamsii. In addition, the higher rate of callus induction using hypocotyl as explant was observed comparing to explants of stem and leaf. There were some variations in the level of the proteins expressed among the transgenic lines such that the lines of CLP(CS1-5, 1-7,4-4) and Dhn5(DS2-2, 2-3) lines produce the protein to higher levels. The transgenic lines showing a higher level of Dhn5 exhibited better growth than nontransgenic callus in presence of 10 and 20％ PEG. In case of the CLP tansgenic lines, both CS1-5 and CS1-7 showed a higher level of freezing tolerance determined by ion leakage test.

• Journal of Periodontal and Implant Science
• /
• v.28 no.2
• /
• pp.263-273
• /
• 1998

For histologic observation of the regenerated bone following guided tissue regeneration (GTR) using ePTFE membranes with calcium carbonate implant and autogenous bone graft, biopsies were collected from 2 patients during 5-year-postoperative surgical reentry. In both combined cases with guided tissue regeneration in conjunction with calcium carbonate implant and autogenous bone graft, significant bone fill and gain in probing attachment level was observed. In histologic examination, specimen in GTR case with calcium carbonate grafting was composed of a dense bone containing vascular channel with lamellar structure and viable bone cells in lacunae, however considerable calcium carbonate particles remained unresorbed and isolated from regenerated bone by the dense cellular and fibrous connective tissue. No formative cells could be seen in contact with remained calcium carbonate particles. In GTR case with autogenous bone grafting, specimen show was composed of a dense lamellar bone containing vascular channel, which showed normal alveolar bone architectures. The present observation indicate that guided tissue regeneration in conjunction with grafting, especially autogenous bone graft, has highly osteogenic potential, however resorbable calcium carbonate granules were not completely resorbed at 5 year postimplantation.

• Journal of Periodontal and Implant Science
• /
• v.30 no.1
• /
• pp.167-180
• /
• 2000

The present study evaluated the effects of guided tissue regeneration using biodegradable membrane, with and without calcium-phosphate thin film coated deproteinated bone powder in beagle dogs. Contralateral fenestration defects(6 × 4 mm) were created 4 mm apical to the buccal alveolar crest on maxillary canine teeth in 5 beagle dogs. Ca-P thin film coated deproteinated bone powder was implanted into one randomly selected fenestration defect(experimental group). Biodegradable membranes were used to provide bilateral GTR. Tissue blocks including defects with overlying membranes and soft tissues were harvested following a four- & eight-week healing interval and prepared for histologic analysis. The results of this study were as follows. 1.......The regeneration of new bone, new periodontal ligament, and new cementum was occurred in experimental group more than control group. 2.......The collapse of biodegradable membranes into defects were showed in control group and the space for regeneration was diminished. In experimental group, the space was maintained without collapse by graft materials. 3........In experimental group, the graft materials were resorbed at 4 weeks after surgery and regeneration of bone surrounding graft materials was occurred at 8 weeks after surgery. 4.......Biodegradable membranes were not resorbed at 4 weeks and partial resorption was occurred at 8 weeks but the framework and the shape of membranes were maintained. No inflammation was showed at resorption. In conclusion, the results of the present study suggest that Ca-P thin film coated deproteinated bone powder has adjunctive effect to GTR in periodontal fenestration defects. Because it has osteoconductive property and prohibit collapse of membrane into defect, can promote regeneration of much new attachment apparatus.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.1
• /
• pp.61-66
• /
• 1997

This study was carried out to investigate the toxicological effects of carbofuran on the histological and fine structures in the kidney, liver, and brain of rat and also to clarify compensatory effects of phenobarbital sodium (PB) and 3-methylcholanthrene(3-MC) on the carbofuran toxicity. SPF albino rats were treated with carbofuran(3.8mg/kg), PB(60mg/kg), 3-MC(60mg/kg), carbofuran+PB, carbofuran+3-MC and subjected to the light microscopic study. In the kidney of rat, hemorrhage and extremely atropic change of renal corpuscles were frequently observed at 48 hrs after carbofuran treatment. Combination treatment groups of carbofuran and PB or 3-MC showed atrophic changes were largely recovered at 6 hrs, and the tissue findings of the kidney became similar to those of control group at 48 hrs after treatment. In the liver of rat treated only carbofuran, the degenerative and necrotic changes of hepatic lobules were frequently observed at 48 hrs after carbofuran treatment. Combination treatment of carbofuran and PB or 3-MC showed the hepatic lobules were similar to those of control groups at 6 hrs after the combination treatment. In the brain of rat treated with carbofuran alone, degenerative changes and dilation of capillary vessel of cerebral cortexes were observed at 48hrs after treatment. Combination treatment of carbofuran and PB or carbofuran and 3-MC showed the cerebral cortexes were similar to those of control groups at 6 hrs after the treatment. These results suggest that PB and 3-MC could regenerate the toxicity of carbofuran to the tissue of kidney, liver and brain of rat.

• Journal of Veterinary Clinics
• /
• v.26 no.6
• /
• pp.563-567
• /
• 2009

This study compared the instrument performance and tissue healing of a steel scalpel with a $CO_2$ laser in an animal uterine surgery model. Five Landrace and Yorkshire mixed breed pigs were used. Two symmetrical incisions were made in the uterine of each pig. One incision was made on the left side of the uterine horn using a steel scalpel, while the other incision was performed on the right side using a $CO_2$ laser with an 8W output power. Each instrument was evaluated clinically for speed, ease of incision, and extent of bleeding. An ovariohysterectomy was performed at 21 days after the surgical procedure for a histological examination. The scalpel was an easier instrument to use in the confines of the uterine tissue, compared with the laser. However, there is no significant difference between the two groups. The amount of bleeding was less in the laser group but the time of the incisions was shorter with the scalpel. Postoperative uterus adhesion in the $CO_2$ laser incisions was lower than the scalpel incisions. Scalpel incisions showed complete restoration of the epithelium and endometrial gland. On the other hand, the laser incisions showed incomplete restoration of the epithelium and endometrial gland. Although the scalpel produced less damage to the uterine tissue and was easier to handle than the $CO_2$ laser, it did not provide hemostasis that was helpful for use on highly vascular tissue. The $CO_2$ laser provided good hemostasis but delayed wound healing.

• Journal of Chest Surgery
• /
• v.41 no.2
• /
• pp.160-169
• /
• 2008

Bakcground: To treat anastomosis site stenosis and occlusion of the artificial vessels used in vascular surgery, tissue-engineered artificial vessels using autologous cells have been constructed. We developed artificial vessels using a polymer scaffold and autologous bone marrow cells and performed an in vivo evaluation. Material and Method: We manufactured a vascular scaffold using biodegradable PLCL (poly lactide-co-${\varepsilon}$-caprolactone) and PGA (poly glycolic acid) fibers. Then we seeded autologous bone marrow cells onto the scaffold. After implantation of the artificial vessel into the abdominal aorta, we performed an angiography 3 weeks after surgery. After the dogs were euthanized we retrieved the artificial vessels and performed histological analysis. Result: Among the six dogs, 2 dogs died of massive bleeding due to a crack in the vascular scaffold 10 days after the operation. The remaining four dogs lived for 3 weeks after the operation. In these dogs. the angiography revealed no stenosis or occlusion at 3 weeks after the operation. Gross examination revealed small thrombi on the inner surface of the vessels and the histological analysis showed three layers of vessel structure similar to the native vessel. Immunohistochemical analysis demonstrated regeneration of the endothelial and smooth muscle cell layers. Conclusion: A tissue engineered vascular graft was manufactured using a polymer scaffold and autologous bone marrow cells that had a structure similar to that of the native artery. Further research is needed to determine how to accommodate the aortic pressure.

• Polymer(Korea)
• /
• v.32 no.1
• /
• pp.26-30
• /
• 2008

This study was designed to investigate the effect of hybridization of synthetic/natural materials for annulus fibrosus (AF) tissue regeneration in vitro and in vivo. The synthetic/natural hybrid scaffolds were prepared using PLGA (poly (lactic-co-glycolic) acid), SIS (small intestinal submucosa) and DBP (demineralized bone particles). PLGA, PLGA/SIS(20%), PLGA/DBP(20%) and PLGA/SIS (10%)/DBP (10%) scaffold were manufactured by solvent casting/salt leaching method. Compressive strength was measured. Rabbit AF cells were isolated, cultured and seeded into experimental groups. Hydroxyproline production and DNA quantity of AP cells on each scaffold was measured at 2, 4 and 6 weeks after in vitro culture. Cell-scaffold composites were implanted subcutaneously into athymic mice. After 1,4 and 6 weeks postoperatively, specimens were taken and H&E, Safranin-O and type I collagen staining were carried out concerning formation of cartilagenous tissue. In vitro PLGA/SIS scaffold was evaluated for total collagen content (bydroryproline/DNA content) and PLGA scaffold was evaluated for compressive strength.