• Journal of Oral Medicine and Pain
• /
• v.26 no.3
• /
• pp.301-308
• /
• 2001

지금까지 여러 가지 형태의 기기를 이용하여 보고된 사람의 교합력은 그 최대치가 매우 다양하다. 본 연구에서는, 교합력을 측정하기 위하여 새로운 측정기기를 개발하였다. 본 기기를 이용하여 전치부 교합력 측정 시에는 대칭적으로 최대한 물도록 하악을 유도하여 최대 교합력을 측정하였고, 구치부는 편측으로 물도록 하악을 유도하여 최대 교합력을 측정하였다. 교합 시 치아간 수직고경은 15.1mm 였다. 측정기기 내 strain gauge를 사용하여 전기저항의 변화를 힘으로 전환하였다. 마이크로 프로세서가 수치를 계산하면 액정화면에 수치가 표시된다. 실험실 내 기기교정 검사에서는 50kg과 100kg의 부하를 가하였다. 개발된 교합력 측정기기의 임상적 신뢰도를 시험하기 위해 건강한 치과대학 재학생 10명을 대상으로 최대 교합력을 측정 하였다. 이 새로운 측정기기로 측정된 교합력은 이전연구에서 기록되었던 것보다 더 높은 수치가 나왔다. 또한 제1대구치와 전치부에서 최대 교합력을 측정한 경우 실험자 내와 실험자 간에 통계적으로 유의한 신뢰성을 얻을 수 있었다. 본 기기는 안정적이고 조작성이 쉽다고 판명되었다. 그러므로, 본 기기는 더 큰 연구 집단의 선별검사에 매우 유용하게 사용할 수 있을 것이며, 또한 치주질환이 있는 치아나 임플란트, 악관절 장애를 가진 환자의 교합력 측정과 같이 특정된 경우의 교합력 측정에도 유용할 것이다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.6
• /
• pp.923-934
• /
• 1987

A flexible one-link robotic manipulator is modelled as a rotating cantilever beam with a hub and tip mass. An active control law is developed with consideration of the distributed flexibility of the arm. Equation of motion is derived by Hamilton's principle and, for modal control, represented as state variable form using Galerkin's mode summation method. Feedback coefficients are chosen to minimize the linear quadratic performance index(PI). To reconstruct the complete state vector from the measurements, an observer is proposed. In order to suppress vibration of the manipulator arm to desirable extent and to obtain accuracy of the positioning, weighting factor of input in PI is adjusted. Spillover effect due to the controller which controls several important modes is examined. Experiment is also performed to validate the theoretical analysis.

• Journal of Korea Water Resources Association
• /
• v.31 no.1
• /
• pp.27-34
• /
• 1998

Groundwater simulation model suing GIS and Arc/Info Gridfunctions were used to delineate wellhead protection areas. Groundwater simulation model was developed within Arcview GIS. The model. which integrates the data input and manipulation. Process simulation. and display of the results . was developed by considering time variations of the parameters. The model was applied to the EPA data. The hydraulic distributions from the EPA data and those calculated from groundwater simulation model agree well and zone of influence from EPA data and that calculated suing GRID functions seem to be consistent. The developed model may be an efficient tool to delineate WHPA because it integrates all the processes inside the GIS.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.11
• /
• pp.29-32
• /
• 1996

기존의 안과 진단 및 치료 기기의 안구 고정장치는 진단 및 치료에 있어서 피검사자와 검사자에 사이에 충분한 협조가 되지 않을 경우 진단의 비효율성과 치료의 안정성등의 문제가 발생하고있다. 따라서 이러한 문제를 보완하기 위하여 SLO의 전면 세극등을 소형의 반사경으로 대치하고 표시등을 후면의 먼거리에 수직으로 배열시켜서 피검사자에게 적당한 높이의 고정등을 선택하게하여 수직방향의 안구 위치를 고정시키고 SLO(Scanning Laser Ophthalmoscope)의 좌우 회전기능으로 표적의 수평방향을 근절시킨 후에 검사자의 조작으로 원격조정되는 서보장치를 이용하여 다시 반사경을 전방향으로 미세하게 회전되게하여 정확한 위치로 안구를 이동시키게 하는 원격조정 표적 추적장치를 개발하였다. 이에 따라 피검사자는 거울에 비친 먼거리의 허상을 보게 되어 세극등을 이용한 근접주사방식의 단점인 안구의 축동, 폭주등으로 인한 환자의 눈의 피로를 최소화하면서 피검사자의 안구를 검사자가 원하는 위치로 고정시킬 수 있게 함으로써 임상실험에서 안과 진단의 정확성과 관리도를 높이고 치료의 효율성과 안전성을 증가시킬 수 있는 원격조정 추적장치로써의 성능을 확인하였다.

• Archives of design research
• /
• v.18 no.2 s.60
• /
• pp.155-164
• /
• 2005

Home-service robots need to have sufficient spatial information about the surroundings for interacting with human intelligently and performing services efficiently. It is very important to investigate the efficient interaction style that supports map building task through human-robot collaboration. We first analyzed map building task with a cleaning robot and drew 4 design factors and tentative solutions, including map building procedure (task-preferred procedure/space- preferred procedure), LCD display installation (robot/robot+remote control), navigation method (push type/pull type), feedback modality(GUI/GUI+TTS). The design factors and tentative solutions were defined as independent variables and levels. This research investigated how those variables affect to the human task performance and behavior in map building tast. 8 kinds of experiment prototypes were built and usability test among 16 house wives was conducted for acquiring empirical data. As the experiment result, in terms of map building procedure, space-preferred procedure indicated better task performance than task-proffered procedure as we expected. For the LCD display installation factor, remote control with LCD display indicated higher task performance and subjective satisfaction. In robot navigation method, it was very difficult to find a significant difference between push type and pull type which contrary to our expectation. In fact, push type indicated higher subjective satisfaction. Also in feedback modality, we have acquired negative feedback an additional TTS operation guidance. It seems that robot's autonomy before achieving spatial information is rudiment condition which means users are just interacting with a mobile appliance. Thus they prefer remote-control-based interaction style in robot map building process as they used in traditional appliance control.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1930-1936
• /
• 2007

Electronic Navigational Charts(ENCs) are official nautical charts which are equivalent to paper charts with supplementary information. Although their main purpose is to be used for the safe navigation of ships, they also contain much information on coasts and seas which may be interesting to ordinary people. However, there is no easy way to access them because of their specialized data format, access method and visualization. This paper proposes m implementation of SVG for the access and services of ENCs. SVG(Scalable Vector Graphic) makes it possible to make use of Vector graphics for map services in basic internet browsing environment. Implementation of SVG for ENC applications by this research is free of special server side GIS mapping system and client side extra technology. The Implementation of SVG for ENC Applications can be summarized as follows: Firstly, SVG provides spatial information to possess searching engine to embody SVG map. Secondly SVG can provide high-quality vector map graphics and interactive facility without special Internet GIS system. It makes it possible to use services with very low cost. Thirdly, SVG information service targeting on maritime transportation can be used as template, so it can be used dynamically any other purpose such as traffic management and vessel monitoring. Many good characteristics of SVG in mapping at computer screen and reusability of SVG document provide new era of visualization of marine geographic information.

• Journal of the Korean School Mathematics Society
• /
• v.21 no.4
• /
• pp.303-326
• /
• 2018

Fraction has difficulties in learning because of the diversity of meanings, the ways of presenting contents and teaching methods in elementary school mathematics. Therefore, the various strategies of teaching of fraction concept is proposed as an alternative. The problem of equal sharing problem is that children can experience the concept of fractions naturally in the context of everyday distribution. Even before learning formal fractions, children can solve them in various ways based on their own experiences. The purpose of this study is to investigate the degree of problem solving and problem solving strategies for children in 2nd, 4th, and 6th grades in elementary school. As a result of the research, the percentage of correct answers increased as the grade increased, but the grade levels showed a difference depending on the numbers given to the problems. Also, there were differences in the problem solving strategies according to the grade levels. Also, according to the numbers presented in the problem, the percentage of correct answers was high in items that were easy to divide, and the percentage of correct answers was low in items that were difficult to divide. When children solved the problems, they were affected by the strategies they could use immediately according to the number presented in the problem, and their learning experiences were also affected.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.18 no.1
• /
• pp.101-112
• /
• 2016

Monitoring and control of the greenhouse environment play a decisive role in greenhouse crop production processes. The network system for greenhouse control was developed by using recent technologies of networking and wireless communications. In this paper, a remote monitoring and control system for greenhouse using a smartphone and a computer with internet has been developed. The system provides real-time remote greenhouse integrated management service which collects greenhouse environment information and controls greenhouse facilities based on sensors and equipments network. Graphical user interface for an integrated management system was designed with bases on the HMI and the experimental results showed that a sensor data and device status were collected by integrated management in real-time. Because the sensor data and device status can be displayed on a web page, transmitted using the server program to remote computer and mobile smartphone at the same time. The monitored-data can be downloaded, analyzed and saved from server program in real-time via mobile phone or internet at a remote place. Performance test results of the greenhouse control system has confirmed that all work successfully in accordance with the operating conditions. And data collections and display conditions, event actions, crops and equipments monitoring showed reliable results.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.3_4
• /
• pp.152-159
• /
• 2004

The Grid system is an emerging computing infrastructure that will substitute for existing distributed systems. However end users have a difficulty in using the Grid because of its complicated usage, which is an inherent characteristic from the heterogeneous mechanism of the Grid. In this paper, we present the JCML(Job Control Markup Language) and its GUI-based editor, which not only provide users with ease of use, improved working environment, but assist users to execute their jobs efficiently The JCML is a job control language that improves the RSL of Globus, which defines global services in Grid. The JCML is designed to support flexibility among various Grid services using standard XML. And it makes use of a graph representation method, GXL(Graph eXchange Language), to specify detailed job properties and dependencies among jobs using nodes and edges. The JCML editor provides users with GUI-based interface. With the JCML editor, a complicated job order can be easily completed using very simple manipulations with a mouse, such as a drag-and-drop.

• Journal of Digital Convergence
• /
• v.12 no.12
• /
• pp.181-188
• /
• 2014

This study has examined the influence of VAT frame(VAT included vs. VAT excluded) on the consumer's attitude. Additionally, it has also examined the moderating effect of thinking style(holistic vs. analytic). The experiment stimuli were operated in 4 types[(product: utilitarian/hedonic)x(VAT: included vs. excluded)]. The results of this study can be summarized as follows. 1) The consumers preferred the VAT included frame to the VAT excluded frame. 2) The moderating effect of thinking style appeared. There is no meaningful difference between the VAT included frame and the VAT excluded one to analytic thinkers. But the holistic thinkers preferred the latter to the former. It is expected that this will be helpful to the person in charge of marketing for the company to establish an effective marketing strategy by considering these results.