• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.5
• /
• pp.523-530
• /
• 2010

Recently more gravity data is being obtained due to the increased demands from the fields of geodesy, geophysics, and military. In general, the observed gravity values are corrected for the effect of tide, instrument drift, and instrument height to generate the absolute gravity values at a point. Until yet, the models for tide and drift corrections and those procedures are not determined in Korea which led to the inconsistent data processing for different data sets. Therefore, in this study, the models for tide and drift are analyzed to select the appropriate models. Based on the analysis, it was found that there is not much difference between Longman and Tamura tide models for celestial objects. Earth tide, however, should be considered in tide correction procedure. In drift corrections, the difference between the model considering only the common points and that considering all points appears significantly large up to 0.04mGal. In this case, the model with all points should be used as it the correct one according to the adjustment theory and it generates estimates with better precision.

• Journal of Astronomy and Space Sciences
• /
• v.10 no.2
• /
• pp.189-196
• /
• 1993

Satellite laser ranging observation of LAGEOS II has been performed using the SLR System at Sheshan Laser Ranging Station, Shanghai Observatory. And we obtained 1,838 observational points. The observed range data is corrected by means of system delay correction using ground target observation, atmospheric refraction delay correction, offset correction, general relativistic correction and tide correction including solid tide, polar tide and ocean tide. As a result, the determined range delay mean value is 19.12m and the mean internal accuracy by means of polynomial fitting and least square method is $\pm$7cm. Corrected observational points are 1,340 and noise ratio to total observational points is 27.1%.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.31-34
• /
• 2010

The rover positioning is performed by estimating the baseline vector components in doubledifference positioning mode. This means that relative displacement due to the tide effects can be neglected when the distance between the reference and rover station is relatively short. However, the tide effects should be carefully modeled and removed as the baseline length gets longer. In this study, the relative displacement over the Korean Peninsula due to tide effects are examined through the numerical analysis. The results show that the tide modeling is required for the precise GPS positioning at cm-level accuracy.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.659-664
• /
• 2012

2010년 내부공간구상이 변화됨에 따라 토지이용과 새만금호 수면적이 변하여 수리현상에 대한 규명이 필요하여 수리모형을 구축하고 상류유량공급, 모형조도, 배수갑문 통과유량, 조석재현에 대한 검보정 실험을 실시하였다. 상류유량공급에 검정 실험결과를 보면 유입유량 제어계측시스템을 통해서 유입되는 유량은 평균적으로 목표유량의 ${\pm}5%$ 범위 내에서 오차를 두고 목표유량의 추세를 따라가고 있다(그림 1). 그리고 유입유량이 $3{\ell}/s$ 미만일 경우와 변곡구간에서 비교적 오차가 크게 난다. 하지만 실험기간동안 누적유량값의 오차는 5% 미만이기 때문에 실험 결과에 미치는 영향은 크지 않다고 판단된다. 조석재현 검정실험을 한 결과는 목표값과 측정값의 큰 차이가 없다. 실험초기에는 목표값과 측정값의 차이가 크게 나타나지만 실험 5분 이후부터는 최대 EL. 0.2m가 차이가 났는데, 조위가 변곡되는 구간에서 나타났다. 실제 실험에서 조위값은 배수갑문의 운영과 관련되어 변곡구간의 조위값보다 상승 하강구간의 조위값(EL. -1.5m~EL. 0.5m)이 실험에 영향을 미치기 때문에 조석발생위어의 조석 재현성은 정밀하다고 판단된다. 모형조도보정 실험은 수치해석 결과와 수리모형실험을 비교하여 실험을 실시하여 해석식과 실험결과값을 근거로 한 조도재료량을 계산하고 이를 배치하여 검보정 실험을 실시하여 조도를 보정하였다. 배수갑문의 통과유량은 현장 관측자료가 부족하여 검 보정이 어려움이 존재한다. 따라서 이에 대한 추후 연구가 필요하다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.10 no.3
• /
• pp.109-119
• /
• 1998

A horizontal tow-dimensional version of POM (Princeton Ocean Model) was modified in representing the bottom friction and the open boundary conditions. To simulate the flooding and drying of intertidal flats, a wetting-and-drying scheme was incorporated into the model. The model then was applied to the Chunsu Bay and its adjacent coastal water. Only the water movement due to tides, the dominant forcing in the study area, was considered. This presents the procedure and the results of model calibration and verification for the Chunsu Bay system. The model was calibrated, using the average tidal characteristics in Tide Tables, for the amplitudes and the phases of tidal waves throughout the modeling domain. Calibration results showed that the model gave a good reproduction of tidal waves. The calibrated model was verified using the time-series measurements of surface elevation and current velocity in the summer of 1995. The model reproduced the tides currents very well. calibration and verification results demonstrated that the model is capable of reproducing the tidal dynamics in the Chunsu Bay system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.3
• /
• pp.299-308
• /
• 2016

Various space geodetic techniques have been developed for highly precise and cost-efficient positioning solutions. By correcting the physical phenomena near the earth’s surface, the positioning accuracy can be further improved. In this study, the vertical crustal deformation induced by the ocean tide loading was accurately estimated through GNSS absolute and relative positioning, respectively, and the tidal constituents of the results were then analyzed. In order to validate the processing accuracy, we calculated the amplitude of eight major tidal constituents from the results and compared them to the global ocean tide loading model FES2004. The experimental results showed that absolute positioning and positioning done every hour during the observation time of 2 hours, which yielded an outcome similar to the reference ocean tide loading model, were better approaches for extracting tide constituents than relative positioning. As a future study, a long-term GNSS data processing will be required in order to conduct more comprehensive analysis including an extended tidal component analysis.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.11 no.1
• /
• pp.31-36
• /
• 2006

A study on estimation of the datum level is carried out by combining observed and simulated harmonic constants of 4 major tides ($M_2$tide, $S_2$tide, $K_2$tide, and $O_1$tide). In the coastal zone, the datum level can be estimated by using observed tide harmonic constants at tide station. The observed tide harmonic constants, however, cannot be used to calculate the datum level of the sea because of the lack of tide station. In order to estimate the datum level of the sea, it is necessary to adopt the simulated harmonic constants instead of the observed ones. In this study, the datum level is calculated by using the simulated harmonic constants which is modified by tuning coefficient based on relationship between observed and simulated harmonic constants at tide station. Tuning coefficient of sea is interpolated on TIN (Triangulated Irregular Network) which has node points at tide stations.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2009.04a
• /
• pp.49-53
• /
• 2009

In this study, point gravity was measured to achieve terrestrid gravity data and the gravity is important element in precise geoid modelling. Surveys the relative gravity of 56 stations on 1st level route. In addition, it calculates gravity values, analysis gravity survey results using tidal correction, drift correction, datum-free adjustment. These point gravity data could be contribute in development of precise geoid model.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.1
• /
• pp.94-108
• /
• 1994

As satellite altimetry is being progressed to apply with higher precision to maginal seas. it is necessary to improve correction procedures for tidal signals in altimetry with more accurate tidal model than the well-known model of Schwiderski for studying marginal sea dynamics. As a first step, tidal regime of semidiurnal tides (M$_2$, S$_2$, $N_2$, $K_2$) and diurnal tides (K$_1$, $O_1$, P$_1$, Q$_1$) were computed with finer details of formulation of tidal model over the East Asian Marginal Seas covering the Okhotsk Sea and South China Sea and part of Northwest Pacific Ocean with mesh resolutions of 1/6$^{\circ}$. Computed results were discussed with observations, previous tidal charts and Schwiderski's tidal map of the region.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.3
• /
• pp.290-297
• /
• 1994

As satellite altimetry is being progressed to apply with higher precision to marginal seas, it is necessary to improve correction procedures fer tidal signals in altimetry with more accurate tidal model than the well-known model of Schwiderski. The Bay of Bengal renders many conspicuous coastal oceanographic issues including tide and storm surge interactions along the upper Bangladesh coast. As a first step. tidal regime of semidiurmal tides (M$_2$, S$_2$, $N_2$, $K_2$) and diurnal tides (K$_1$, $O_1$, P$_1$) are computed with a model having a mesh resolution of 1/4 degree over the whole Bay of Bengal. Computed results are discussed with observation and previous Schwideski's tidal map of the region.