• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.3 s.303
• /
• pp.81-90
• /
• 2005

When we transmit signals, which are quantized by the vector quantizer (VQ), through noisy channels, the overall performance of the coding system is very dependent on the employed quantization scheme and the channel error effect. In order to design an optimal coding system, the source and channel coding scheme should be jointly optimized as in the channel-optimized VQ. As a suboptimal approach, we may consider the robust VQ (RVQ). In RVQ, we consider developing an index assignment function for mapping the output of quantizers to channel symbols so that the effect of the channel errors is minimized. Recently, a VQ, which can reduce the encoding complexity and is called the sample-adaptive product quantizer (SAPQ), has been proposed. SAPQ has very similar quantizer structure as to the product quantizer (PQ). However, the quantization performance can be better than PQ. Further, the encoding complexity and the memory requirement for the codebooks are lower than the regular full-search VQ case. In this paper, SAPQ is employed in order to design an RVQ to channel errors by reducing the vector dimension. Discussions on the codebook structure of SAPQ and experiments are introduced in an aspect of robustness to noisy channels.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.9
• /
• pp.54-62
• /
• 2015

Although NAND flash-based SSD (Solid-State Drive) provides superior performance in comparison to HDD (Hard Disk Drive), it has a major drawback in write endurance. As a result, the lifetime of SSD is determined by the workload and thus it becomes a big challenge in current technology trend of such as the shifting from SLC (Single Level Cell) to MLC (Multi Level cell) and even TLC (Triple Level Cell). Most previous studies have dealt with wear-leveling or improving SSD lifetime regarding hardware architecture. In this paper, we propose the optimal configuration of host I/O stack focusing on file system, I/O scheduler, and link power management using JEDEC enterprise workloads in terms of WAF (Write Amplification Factor) which represents the efficiency perspective of SSD life time especially for host write processing into flash memory. Experimental analysis shows that the optimum configuration of I/O stack for the perspective of SSD lifetime is MinPower-Dead-XFS which prolongs the lifetime of SSD approximately 2.6 times in comparison with MaxPower-Cfq-Ext4, the best performance combination. Though the performance was reduced by 13%, this contributions demonstrates a considerable aspect of SSD lifetime in relation to I/O stack optimization.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.602-608
• /
• 2020

Development of Internet technology and the spread of various smart devices provide a convenient computing environment for people, which is becoming common thanks to the Internet of Things (IoT). However, attacks by hackers have caused various problems, such as leaking personal information or violating privacy. In the IoT environment, various smart devices are connected, and network attacks that are used in the PC environment are occurring frequently in the IoT. In fact, security incidents such as conducting DDoS attacks by hacking IP cameras, leaking personal information, and monitoring unspecified numbers of personal files without consent are occurring. Although attacks in the existing Internet environment are PC-oriented, we can now confirm that smart devices such as IP cameras and tablets can be targets of network attacks. Through performance evaluation, the proposed protocol shows 11% more energy efficiency on servers than RSA, eight times greater energy efficiency on clients than Kerberos, and increased efficiency as the number of devices increases. In addition, it is possible to respond to a variety of security threats that might occur against the network. It is expected that efficient operations will be possible if the proposed protocol is applied to the IoT environment.

• Journal of Broadcast Engineering
• /
• v.18 no.2
• /
• pp.178-184
• /
• 2013

In this paper, we propose an efficient parallelization technique of PU-level motion estimation (ME) in the next generation video coding standard, high efficiency video coding (HEVC) to reduce the time complexity of video encoding. It is difficult to encode video in real-time because ME has significant complexity (i.e., 80 percent at the encoder). In order to solve this problem, various techniques have been studied, and among them is the parallelization, which is carefully concerned in algorithm-level ME design. In this regard, merge estimation method using merge estimation region (MER) that enables ME to be designed in parallel has been proposed; but, parallel ME based on MER has still unconsidered problems to be implemented ideally in HEVC test model (HM). Therefore, we propose two strategies to implement stable parallel ME using MER in HM. Through experimental results, the excellence of our proposed methods is shown; the encoding time using the proposed method is reduced by 25.64 percent on average of that of HM which uses sequential ME.

• Journal of KIISE:Computing Practices and Letters
• /
• v.11 no.1
• /
• pp.36-49
• /
• 2005

Recently, many researchers have given high attention to the semantic web services based on the semantic web technology While existing web services use the XML-based web service description language, WSDL, semantic web services are utilizing web service description languages such as DAML-S in ontology languages. The researchers of semantic web services are generally focused on web service discovery, web service invocation, web service selection and composition, and web service execution monitoring. Especially, the semantic web service discovery as the basis to accomplish the ultimate semantic web service environment has some different properties from previous information discovery areas. Hence, it is necessary to develop the storage system and discovery mechanism appropriate to the semantic well description languages. Even though some related systems have been developed, they are not appropriate for the embedded system environment, such as intelligent robotics, in which there are some limitations on memory disk space, and computing power In this regard, we in the embedded system environment have developed the document management system which efficiently manages the web service documents described by DAML-S for the purpose of the semantic web service discovery, In addition, we address the distinguishing characteristics of the system developed in this paper, compared with the related researches.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1170-1181
• /
• 2012

Wireless Sensor Networks(WSNs) are used in diverse applications. In general, sensor nodes that are easily deployed on specific areas have many resource constrains such as battery power, memory sizes, MCUs, RFs and so on. Hence, first of all, the efficient energy consumption is strongly required in WSNs. In terms of event states, event-driven deliverly model (i.e. surveillance and reconnaissance applications) has several characteristics. On the basis of such a model, clustering algorithms can be mostly used to manage sensor nodes' energy efficiently owing to the advantages of data aggregations. Since a specific node collects packets from its child nodes in a network topology and aggregates them into one packet to relay them once, amount of transmitted packets to a sink node can be reduced. However, most clustering algorithms have been designed without considering can be reduced. However, most clustering algorithms have been designed without considering characteristics of event-driven deliverly model, which results in some problems. In this paper, we propose enhanced clustering algorithms regarding with both targets' movement and energy efficiency in order for applications of surveillance and reconnaissance. These algorithms form some clusters to contend locally between nodes, which have already detected certain targets, by using a method which called CHEW (Cluster Head Election Window). Therefore, our proposed algorithms enable to reduce not only the cost of cluster maintenance, but also energy consumption. In conclusion, we analyze traces of the clusters' movements according to targets' locations, evaluate the traces' results and we compare our algorithms with others through simulations. Finally, we verify our algorithms use power energy efficiently.

• Journal of KIISE:Software and Applications
• /
• v.33 no.9
• /
• pp.776-786
• /
• 2006

This paper proposes XML based mobile information visualization system using rectangle layout to show effectively XML based information to user on mobile devices which do not have a rich display feature. We define XML schema that can describes information in graph with cycle as well as information in tree form. It suggests using rectangle layout method that is an improvement of the traditional method of the radial layout because the specificity of the mobile display should be considered when XML information is rendered on the screen. And then, it applies DOI of fisheye view algorithm to information on the rectangle layout to represent all and user interest information. And it also suggests an effective method considering capability of mobile devices to decrease user's confusion and improve awareness of user when a user Interest target selected. The proposed information visualization system in the form of focus+context supports an effective interface for information retrieval via mobile devices, such as PDA, cellular phone and smart phone, that usually have less power of CPU than that of PC and the constraints of display and memory. In this paper, it performs experiments and makes an evaluation comparing information visualization method between the traditional radial layout and the proposed rectangle layout.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.3
• /
• pp.156-162
• /
• 2007

The parallel beam SPECT system acquires projection data by using collimators in conjunction with photon detectors. The projection data of the parallel beam SPECT system is, however, blurred by the point response function of the collimator that is used to define the range of directions where photons can be detected. By increasing the number of parallel holes per unit area in collimator, one can reduce such blurring effect. This approach also, however, has the blurring problem if the distance between the object and the collimator becomes large. In this paper we consider correction methods for artifacts caused by non-circular orbit of parallel beam SPECT with many parallel holes per detector cell. To do so, we model the relationship between the object and its projection data as a linear system, and propose an iterative reconstruction method including artifacts correction. We compute the projector and the backprojector, which are required in iterative method, as a sum of convolutions with distance-dependent point response functions instead of matrix form, where those functions are analytically computed from a single function. By doing so, we dramatically reduce the computation time and memory required for the generation of the projector and the backprojector. We conducted several simulation studies to compare the performance of the proposed method with that of conventional Fourier method. The result shows that the proposed method outperforms Fourier methods objectively and subjectively.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.5
• /
• pp.169-176
• /
• 2020

Recently, deep neural networks (DNNs) have brought revolutions to many mobile and embedded devices by providing human-level machine intelligence for various applications. However, high inference accuracy of such DNNs comes at high computational costs, and, hence, there have been significant efforts to reduce computational overheads of DNNs either by compressing off-the-shelf models or by designing a new small footprint DNN architecture tailored to resource constrained devices. One notable recent paradigm in designing small footprint DNN models is sharing parameters in several layers. However, in previous approaches, the parameter-sharing techniques have been applied to large deep networks, such as ResNet, that are known to have high redundancy. In this paper, we propose a parameter-sharing method for already parameter-efficient small networks such as ShuffleNetV2. In our approach, small templates are combined with small layer-specific parameters to generate weights. Our experiment results on ImageNet and CIFAR100 datasets show that our approach can reduce the size of parameters by 15%-35% of ShuffleNetV2 while achieving smaller drops in accuracies compared to previous parameter-sharing and pruning approaches. We further show that the proposed approach is efficient in terms of latency and energy consumption on modern embedded devices.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.292-294
• /
• 2018

Recently, damage caused by natural disasters such as fire, earthquake, heavy rains and heavy snow is increasing. In addition, traffic accidents due to freezing, fog and fire in tunnels and bridges are frequently occurring. In such a disaster situation, it is very important to take prompt action by the person in charge of managing the facility and area.To this end, a disaster broadcasting system is used, but in the existing system, the broadcasting room and the speaker are connected by a wired connection. Also, the person in charge has to be in the broadcasting room to broadcast, which has a problem of delaying the time. In this paper, we design a disaster broadcasting system using LTE modem. The designed system enables a broadcasting person to make a call to a broadcasting system from anywhere using a cellular phone and a public telephone. Broadcasting via telephone is possible only with the telephone number pre-registered in the system and can be registered / deleted by the administrator. The registered telephone number, incoming voice file, and announcement voice for automatic broadcasting are stored in the system internal SD memory for convenient management. This disaster broadcasting system is expected to contribute to quick and convenient disaster broadcasting.