• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.689-692
• /
• 2011

본 논문에서는 해양작업 상태의 하중조건을 고려한 부유식 원유생산 저장 하역 장치에 설치된 라이져 보강구조의 강도설계에 관련하여 다양한 근사화 기법 기반 설계 최적화 및 그 성능을 비교하고자 한다. 설계 최적화 문제는 하중조건별 구조강도의 제한조건 하에서 중량을 최소화하여 설계변수인 구조 부재치수가 결정되도록 정식화 된다. 비교 연구를 위해 사용된 근사화 기법은 반응표면법 기반 순차적 근사최적화(RBSAO), 크리깅 기반 순차적 근사최적화(KBSAO), 그리고 개선된 이동최소자승법(MLSM) 기반 근사최적화 기법인 CF-MLSM와 Post-MLSM이다. 본 연구에 적용한 MLSM 기반 근사최적화 기법들은 제한조건의 가용성을 보장할 수 있도록 새롭게 개발되었다. 다양한 근사화 모델 기반 설계 최적화 기법에 의한 결과는 설계 해의 개선 및 수렴속도 등의 수치적 성능을 기준으로 실제 비근사 설계최적화 결과와 비교검토 하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.5
• /
• pp.543-551
• /
• 2011

The paper deals with the comparative study of design optimization based on various approximation techniques in strength design of riser support structure installed on floating production storage and offloading unit(FPSO) using offshore operation loading conditions. The design optimization problem is formulated such that structural member sizing variables are determined by minimizing the weight of riser support structure subject to the constraints of structural strength in terms of loading conditions. The approximation techniques used in the comparative study are response surface method based sequential approximate optimization(RBSAO), Kriging based sequential approximate optimization(KBSAO), and the enhanced moving least squares method(MLSM) based approximate optimization such as CF(constraint feasible)-MLSM and Post-MLSM. Commercial process integration and design optimization(PIDO) tools are employed for the applications of RBSAO and KBSAO. The enhanced MLSM based approximate optimization techniques are newly developed to ensure the constraint feasibility. In the context of numerical performances such as design solution and computational cost, the solution results from approximate techniques based design optimization are compared to actual non-approximate design optimization.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.851-854
• /
• 2015

수중음파통신은 물속에서 지상과는 달리 음파를 사용하여 통신한다. 또한 제한된 전력과 자원을 사용하기 때문에 최소한의 연산으로 본래의 목적을 수행해야만 하는 조건이 따른다. 따라서 수중음파통신에 보안을 적용하기 위해서는 기밀성과 안전성도 중요하지만 무엇보다 가용성을 고려한 보안설계가 중요하다. 본 논문은 제한된 전력과 자원 환경에서 동작하는 수중음파통신용 MAC 프로토콜에 가용성이 부각할 수 있는 LEA 블록암호알고리즘의 적용방안을 논하고자 한다. 또한 기존의 AES(Advanced Encryption Standard)와 ARIA(Academy, Research Institute, Agency) 블록암호알고리즘과의 성능분석을 통해 LEA의 우수성과 수중음파통신에 적합성을 보이고자 한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1603-1611
• /
• 2010

The comparative study of regression-model-based approximate optimization techniques used in the strength design of an automotive knuckle component that will be under bump and brake loading conditions is carried out. The design problem is formulated such that the cross-sectional sizing variables are determined by minimizing the weight of the knuckle component that is subjected to stresses, deformations, and vibration frequency constraints. The techniques used in the comparative study are sequential approximate optimization (SAO), sequential two-point diagonal quadratic approximate optimization (STDQAO), and approximate optimization based on enhanced moving least squares method (MLSM), such as CF (constraint feasible)-MLSM and Post-MLSM. Commercial process integration and design optimization (PIDO) tools are utilized for the application of SAO and STDQAO. The enhanced MLSM-based approximate optimization techniques are newly developed to ensure constraint feasibility. The results of the approximate optimization techniques are compared with those of actual non-approximate optimization to evaluate their numerical performances.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.7
• /
• pp.651-657
• /
• 2008

A new approach for maximizing torque capability of low efficient reaction wheel assembly is addressed in this paper. At first, to find out a solution in constrainted field, weighted pseudo-inverse and momentum minimized allocation are suggested instead of a general control allocation called pseudo-inverse. The second method is a structural manner to enlarge torque capability of specific axis by changing installed skew angle of wheels. Two proposed methods are applied to large angle maneuvers of satellite. Improvement of control performance and feasibility for applying to commercial satellite attitude control are demonstrated by numeric simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4C
• /
• pp.550-558
• /
• 2004

In order to design network node for guaranteeing availability against network based DoS attack, some restrictions such as the relationship analysis on upper and lower layer bandwidth, buffer capacity, attack resources, a number of attack session and loss probability are analyzed. And then, to make good use of network resource, the relationship between required resources for satisfying loss probability and cost is discussed. The results of this study are expected to be applied to the effective security node design against network DoS.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.12
• /
• pp.1119-1125
• /
• 2010

Most of the sludge pre-treatment methods to improve the anaerobic digestibility of sludge are not practied in the fields with low economical efficiency. The venturi cavitation system (VCS) adopting hydrodynamic cavitation is simple and requires low energy. This research was conducted to investigate the optimum design and operating conditions of the VCS. The experimental results indicated that the optimum number of venturi in series was three, and the suction mode operation of the pump yielded 1.6 times higher pre-treatment efficiency per unit energy consumption than the discharge mode. The combination of venturies with different throat sizes did not affect the pre-treatment efficiency. Also, the parallel installation of the three in series venture unit yielded 30% higher pre-treatment efficiency per unit energy consumption than the single unit. Under parallel conditions, the solubilization efficiency was 5.6 mg ${\Delta}SCOD/g$ TS/kWh, which is higher than the previously reported value.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.5
• /
• pp.73-78
• /
• 2007

It has been increasing that significant loss of life and property due to global wanning and extreme weather, and the climate and temperature changes in Korea Peninsula are now greater than the global averages. Climate information from regional climate models(RCM) at a finer resolution than that of global climate models(GCM) is required to predictclimate and weather variability, changes, and impacts. The new surface boundary conditions(SBCs) development is motivated by the limitations and inconsistencies of existing SBCs that have influence on model predictability. A critical prerequisite in constructing SBCs is that the raw data should be accurate with physical consistency across all relevant parameters and must be appropriately filled for missing data if any. The aim of this study is to construct appropriate SBCs for the RCM in Asia domain which will be used for the prevention of disasters due to climate changes. As all SBCs have constructed onto the 30km grid-mesh of the RCM suitable for Asia applications, they can be also used for other distributed models for climate and hydrologic studies.

• Food Science and Preservation
• /
• v.11 no.3
• /
• pp.304-312
• /
• 2004

Early harvested Satsuma mandarin (Citrus unshiu) was treated with hot air at 45$^{\circ}C$ for 2, 4, and 6 hours and stored at 5$^{\circ}C$ for 3 weeks and additional one week at 18$^{\circ}C$ (simulated shelf-life) in order to examine the effect of mild heat treatment on the storage quality of the citrus fruits. Quality attributes of the sample fruits evaluated during storage included the respiration rate, internal gas composition, pH, titratable acidity, soluble solids content, flesh weight loss, firmness, peel color, decay ratio, and sensory properties. The initial respiration rates, just after hot air treatment, were significantly higher in the heat-treated fruits compared to the untreated. However, during storage at 5$^{\circ}C$, the respiration rates showed a similar level in all treatments. Internal gas composition exhibited no significant difference between the heat-treated and untreated samples. Hot air treatment also exerted no significant effects on the pH, titratable acidity, soluble solid contents, flesh weight loss, firmness, and peel color of the fruits during the whole storage period. The decay ratio was manifestly lower in the heat-treated fruits than the untreated. For sensory attributes including visual and organoleptic quality, no significant difference was observed among sample fruits. Results suggested that mild heat treatment with hot air at 45$^{\circ}C$ for 4-6 hours could be used as an effective preconditioning method to keep the postharvest quality of Satsuma mandarin by reducing the decay incidence remarkably during storage.

• Microbiology and Biotechnology Letters
• /
• v.36 no.4
• /
• pp.260-267
• /
• 2008

The choice of expression vector is very important for industrial production of proteins. Therefore, the systematic mining of promoters over a wider range of genetic resource and/or host is required. We previously reported a novel bidirectional reporting system (pBGR) for the isolation of promoters from metagenome and screened useful promoters that functioned constitutively in E. coli under general culture conditions. Among them, three promoter sequences including each upstream region were amplified by PCR and used to construct new expression vectors. To facilitate subcloning, a multi-cloning site was incorporated into the downstream region of the revere primer sequence. At these sites, GFP, esterase and $\beta$-glucosidase were subcloned and analyzed the constitutive expression ability of new promoter in terms of protein solubility and expression level. As a result, these vectors expressed the proteins constitutively to a level of $2{\sim}3%$ of the total cell protein in soluble fraction (>80 %). This study suggested that excavation of metagenomic promoters for construction of expression vector in a certain strain could provide a way for the development of the expression systems.