• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.4
• /
• pp.393-400
• /
• 2008

1,4-Dioxane($C_4H_8O_2$), which is used as a solvent stabilizer, could make harmful effects on ecosystem because of its higher solubility, toxicity and carcinogenic by US EPA. From 2011, its discharge limit to waterbody will be regulated at 5 mg/L by Ministry of Environment Republic of Korea. It was thus to investigate that the currently operating activated sludge in polyester manufacturing processes in Gumi can properly treat it to meet with the regulation standard. For that purpose, the removal rate of 1,4-dioxane and its microbial properties were assessed for a few companies(i.e. K, H and T). Its removal efficiency was the most highly recorded in H as 98% and then 77% for K, which met with the regulation standard. However, concentration of 1,4-dioxane of T was 23 mg/L in the effluent, which is more than the regulation standard. Aside from, microbial degradation test was done for 100 ppm of 1,4-dioxane in BSM (Basal salt medium) inoculated with each of activated sludge. After 7 days, 1,4-dioxane was completely removed in the test bottle inoculated with H sludge, 67% in T and 52% in K, which could confirm that the given activated sludge might have different biodegradability against the amount of 1,4-dioxane. Therefore, microbial diversity in each company was investigated by 16s rDNA cloning methods where a species, e.g. Methylibium petroleiphilum PM1, was the greatest observed from H and in lesser from K, but it was not detected from T. Methylibium petroleiphilum PM1 is known to efficiently degrade ether like methyl tertiary-butyl ether(MTBE). It is concluded that the activated sludge in H can be most effectively adopted for a biodegradation of 1,4-dioxane in the concern of industrial sector.

• Food Industry
• /
• s.180
• /
• pp.27-64
• /
• 2004

국내 제조업 전체에서 식음료품은 $6.31\%$를 차지하고 있다. 2000년을 기준으로 식품산업의 총매출실적을 보면 32조 3,463억원을 기록하고 있는데, 이 중 식료품은 26조 921억원, 알콜올음료를 포함한 음료품은 6조 2,516억원을 차지하고 있다. 2001년, 음료시장의 규모는 약 2조 7,900억원 정도였다. 빠르게 성장하던 전체 음료시장의 매출은 IMF 이후 약간 주춤하는 경향을 보였지만 지속적으로 매출액이 상승하여 2002년에는 3조 4천억원의 매출을 기록하였다. 이것은 사이다, 후레바, 정통주스, 냉장주스, 스포츠 음료, 두유 및 기능성음료 등이 성장을 주도하였다. 2003년 상반기, 1조 6,500억원으로 전년 동기대비 $3\%$ 감소하였지만 2003년 전체 실적은 대략 지난해와 비슷한 3조 5,000억원 규모로 전망된다. 내수량의 경우 탄산음료와 과즙음료가 감소하는 경향을 나타냈지만, 전체적으로는 증가하였다. 다류시장의 규모는 약 650억원, 캔커피시장의 규모는 2,400억원 정도로 나타났다. 이처럼 음료$\cdot$다류 시장은 전체적으로 약 4조원의 거대시장규모를 형성하고 있으며 내수가 지속적으로 증가되고 있어, 점차 시장규모도 증가할 것으로 전망되고 있다. 최근에는 기능성 음료 및 다류의 시장규모가 전체의 $20\%$에 달할 정도로 신장하였으며, 기능성음료 및 다류의 특허출원도 지속적으로 증가하고 있는 실정이다. 이는 비단 국내에서 뿐만 아니라 세계적인 현상이며 이러한 추세는 앞으로 지속될 것으로 전망되고 있다. 이처럼 기능성음료 및 다류의 성장이 두드러지고 있는 것은 시대가 변하면서 현대인들의 생활방식과 식생활 변화, 질병형태 다양화 등 여러 사회적 여건이 변화되고 있는데 기인하며, 현대인의 건강에 대한 관심의 증대는 음료시장의 쾌속성장과 틈새수요를 지속적으로 창출하고 있다. 현재 세계 건강기능성 식품의 시장 규모는 약 160조원이며, 국내의 경우 약 1조원에 이르는 실정이다. 이 중 기능성음료 시장은 국내에서 약 4천억원 규모로 기능성식품 시장의 $40\%$를 차지하고 있다. 이처럼 기능성음료 시장은 최근 연간 $7\%$ 정도의 빠른 성장률을 보이고 있으며 향후에도 $6.7\%$의 실질 연간 성장률을 지속할 것으로 전망되고 있다. 전해질(이온)음료나 식이섬유를 포함하는 다이어트음료에서 출발한 기능성음료는 숙취해소, 성인병 예방, 스트레스 해소에 이르기까지 각종 질병의 치료 및 예방으로 확대되고 있다. 앞으로는 BT 및 나노 기술 등을 이용한 신기능 소재들에 대한 다각적인 효능의 규명에 따른 음료$\cdot$다류 소재의 개발과 더불어 체질개선, 다이어트, 숙취해소 등의 특정한 기능성과 관련한 음료$\cdot$다류의 특허출원이 계속될 것으로 전망된다. 복잡한 한약의 제조과정을 단순화하여 티백이나 캔 형태로 만든 맛과 기능이 조화된 음료$\cdot$다류 분야의 연구개발이 지속될 것으로 보이며, 시장 규모의 확대와 더불어 기능성과 간편성을 동시에 추구하는 신세대 소비자들의 성향을 겨냥하여 기존의 음료$\cdot$다류 전문 업체 외에도 제약회사 등의 비음료 업체도 다양한 형태의 음료$\cdot$다류 기술개발을 지속할 것으로 예상되고 있다. 특히 새로운 신기능성 소재를 개발하는 것은 고부가가치 기술로써 BT, NT 등의 최첨단 기술의 발전과 도입으로 인해 그동안 수입에 의존하던 기능성 소재들도 국내 기업들의 축전된 기반기술을 통하여 대거 참입할 것으로 보인다. 하지만, 여러 업체의 음료$\cdot$다류시장 진출에 따라 야기될 수 있는 비위생이고 효능이 불확실한 식품의 유통, 업체간의 과열경쟁에 따른 유통질서 문란 등은 모처럼 활기를 되찾은 음료$\cdot$다류 분야의 기술개발을 위축시킬 수도 있으므로 정부차원에서 체계적이고 효율적인 관리가 조속히 이루어져야 할 것이며 이를 제도적으로 뒷받침하기 위한 정책이 수립되고 시행되어야 할 것으로 보인다. 특히, 원료적인 측면에서의 무역 불균형은 반드시 해소되어야 할 부분이다. 대부분이 수입 기능성 원료에 의존하고 있는 현실에서 국내의 BT 기술 확충에 더욱 많은 투자와 노력이 집중되어야 할 것이다. 세계적으로 경쟁이 될 수 있는 기능성 소재의 개발과 이를 통한 신기능 음료의 개발은 단순한 수학적 계산을 넘어서 국가의 기술력을 홍보할수 있는 좋은 계기가 되기 때문이다. 바야흐로 음료$\cdot$다류 분야에 대한 열기가 식품시장을 주도하면서, 시장이 안정적으로 확대되기 위해서는 지속적인 기술개발이 이루어져야 한다는 것은 재론의 여지가 없다고 하겠다.

• Journal of Korea Port Economic Association
• /
• v.36 no.2
• /
• pp.19-36
• /
• 2020

The bidding phase for logistics outsourcing services is critical for both shippers and logistics companies. According to the logistics bidding phase, the shipper should provide logistics operation information to logistics companies to resolve uncertainty. In addition, the logistics company can win the contract volume that was placed in the bid by expressing their experience and know-how, and proposing to share the risks and benefits of the shipper's logistics operation. Therefore, it is necessary to examine the factors that can be identified during the bidding phase for logistics outsourcing and how these factors affect the satisfaction of logistics outsourcing services. Based on the factors identified in the preceding studies on logistics outsourcing partnership factors and those on logistics outsourcing determinants, a survey was conducted on experts engaged in logistics companies, performing logistics for domestic shippers and analyzed using Smart-PLS. This study presents the following implications. First, in the logistics bidding phase, the shipper should provide its logistics operation information to logistics firms to resolve uncertainties. Details An in-depth explanation of the operation details will be presented via the bidding presentation, and on-site tours of manufacturing plants and logistics centers should also be carried out if necessary. Second, in the bidding phase, logistics companies should appeal through proposals to their competitiveness, such as experience and knowledge of the logistics of the shipper, and also consider alliances with other logistics companies to supplement their insufficient logistics services. Third, logistics companies should make proposals to share profits and risks through logistics outsourcing during the bidding phase, propose accepting risks from environmental uncertainties of the shipper within its capacity to an acceptable extent, and share the benefits of carrying out the shipper's logistics.

• Journal of Preventive Medicine and Public Health
• /
• v.25 no.4 s.40
• /
• pp.374-385
• /
• 1992

Some circadian rhythms can become disorgnized due to rotating shift work. This lack of organization, termed desynchronization, can produce a group of symptoms such as insomnia, GI disturbance and fatigue among many rotating shift workers. The magnitude of these symptoms are influenced by personal and environmental factors and the patterns of shift work. This study was carried out to investigate the subjective symptoms related to rotational schedules of shift work after personal and environmental factors adjusted. 182 male workers in rapidly rotating shift system and 86 male workers in weekly rotating shift system were conducted the questionnaire on personal factors and subjective sleep, GI and fatigue symptoms. Major findings obtained from this study are as follows: 1. The symptoms of 'feeling tired at work' and 'being irritable' were more frequent in weekly rotating shift workers (P<0.05), and the mean of symptom score was significantly higher in weekly rotating shift workers(P<0.01). 2. According to 6 hours of sleeping which is a definite elevation point of fatigue, there was not a significant difference between two groups in sleeping hours. Among workers in rapidly rotating shift system, the mean of symptom score was significatly higher in workers of less than 6 hours of sleeping(P<0.05), but it was not different among weekly rotating shift workers. 3. The symptoms of GI disturbance were more frequent in weekly rotating shift workers but statistically not significant. 4. The positive rate of mental and physical fatigue symptoms were significantly higher in weekly rotating shift workers(P<0.01) and mental and physical fatigue symptoms were more frequent in them (P<0.01). 5. After the effect of the factors that were significantly different between two groups by $X^2-test$ were controlled, the mean score of sleep disturbance was significantly higher in weekly rotating shift workers (P<0.01) and mental physical fatigue symptoms were more frequent in them (P<0.01). Based on these study results, subjective symptoms were more common in the weekly rotating shift workers. In future, medical examination and laboratory test will be also administered to evaluate a more accurate health outcomes and the review of current shift schedules will be required.

• Journal of Animal Science and Technology
• /
• v.47 no.5
• /
• pp.867-876
• /
• 2005

The microbial contamination of ice cream product commercially available in Korea was determined using ice bar, ice cream, ice milk and non-milk fat ice cream. Irradiation effect on enhancement of microbiological safety was also investigated at doses of 1, 3, and 5 kGy. In all products, yeast and molds were not detected, however, total aerobic and coliform bacteria were detected at 1-2 and 1-1.5 Log CFU/g level, respectively. According to the different flavor used in ice cream, total aerobic bacteria were detected as 2.30, 2.90, and 3.32 Log CFU/g level in vanilla, chocolate, and strawberry ice cream, respectively. Yeast and mold was not detected in vanilla ice cream but 2.30 and 2.70 Log CFU/g in chocolate and strawberry ice cream, respectively. Coliforms were also detected 1-2 Log CFU/g in the ice cream with different flavors. Listeria inocua and Escherichia coli were detected from 3 commercial samples but Salmonella spp. was not detected using API kit. Gamma irradiation significantly reduced the level of the contaminated total aerobic bacteria, yeast and molds and coliform population in the ice creams. These results indicated that irradiation(5kGy or less) is effective to ensure safety of ice cream.

• Korean Journal of Agricultural Science
• /
• v.22 no.2
• /
• pp.188-196
• /
• 1995

To obtain useful mould strain in soybean fermentation industry, we collected conventional Meju all over the Korea and tested existance of aflatoxin in Meju collected. Also, we measured distribution of microorganism and enzyme activity of Meju and isolated Aspergillus oryzae O4-5 as a industrially useful mould. The results obtained were summarized as follows: 1. Aflatoxin was not detected by EZ-Screen Test Kit and HPLC analysis in various Meju sample collected all over the Korea from 1994.12 to 1995.2. 2. Colony forming units(CFU) of mould, yeasts, aerobe, and anaerobe were $1.3{\times}10^4-2.8{\times}10^6$, $1{\times}10^2-1.5{\times}0^6$, $2.0{\times}10^7-8.0{\times}10^8$ and $3.0{\times}10^6-7.3{\times}10^8$ per gram of Meju, respectively, indicating that CFU inter Meju samples were varied with big difference. 3. The activities of ${\alpha}$-amylase and gluco-amylase were 5-80 units and 2-34 units per g of Meju, respectively. It was shown that enzyme activity was varied depending on where the Meju was collected. 4. The activities of acidic, neutral and alkaline protease were 5-33 units, 5-302 units and 5-363 units per g of Meju, respectively. Acidic protease of Improved Meju made by D-Company was higher than that of conventional Meju as 66 units per g of Meju. 5. CNU O4-5 strain selected as a noble strain could produce amylase and protease in high level, and identified as a strain that belongs to Aspergillus oryzae. 6. The activities of acidic and neutral protease of Aspergillus oryzae CNU O4-5 strain isolated were about 10% higher than those of Aspergillus oryzae JM which has been used in soybean fermentation industry. Amylase activity of CNU O4-5 strain was similar to Aspergillus oryzae JM.

• Tuberculosis and Respiratory Diseases
• /
• v.64 no.3
• /
• pp.210-214
• /
• 2008

Chemical pneumonitis is an occupational lung disease that's caused by the inhalation of chemical substances. Its severity depends on the characteristics of the substances, the exposure time and the susceptibility of the patients. Hydrogen sulfide is not only emitted naturally, but it also frequently found in industrial settings where it is either used as a reactant or it is a by-product of manufacturing or industrial processes. Inhalation of hydrogen sulfide causes various respiratory reactions from cough to acute respiratory failure, depending on the severity. Two pharmaceutical factory workers were admitted after being rescued from a waste water disposal site that contained hydrogen sulfide. In spite that they recovered their consciousness, they had excessive cough and mild dyspnea. The simple chest radiographs and high resolution computed tomography showed diffuse interstitial infiltrates, and hypoxemia was present. They were diagnosed as suffering from chemical pneumonitis caused by hydrogen sulfide. After conservative management that included oxygen therapy, their symptoms, hypoxemia and radiographic abnormalities were improved.

• Journal of Dairy Science and Biotechnology
• /
• v.32 no.2
• /
• pp.93-100
• /
• 2014

In general, whey obtained from various cheese batches is being reused, so as to improve the texture and to increase the yield and the nutrient value of the various final milk-based products. In fact, re-usage of whey proteins, including whey cream, is a common and routine procedure. Unfortunately, most bacteriophages can survive heat treatments such as pasteurization. Hence, there is a high risk of an increase in the bacteriophage population during the cheese-making process. Whey samples contaminated with bacteriophages can cause serious problems in the cheese industry. In particular, the process of whey separation frequently leads to aerosol-borne bacteriophages and thus to a contaminated environment in the dairy production plant. In addition, whey proteins and whey cream reused in a cheese matrix can be infected by bacteriophages with thermal resistance. Therefore, to completely abolish the various risks of fermentation failure during re-usage of whey, a whey treatment that effectively decreases the bacteriophage population is urgently needed and indispensable. Hence, the purpose of this review is to introduce various newly developed methods and state-of-the-art technologies for removing bacteriophages from contaminated whey and whey products.

• Korean Journal of Materials Research
• /
• v.9 no.3
• /
• pp.274-281
• /
• 1999

Usually sputtering and electroless plating methods were used for manufacturing metal-alloy thin film magnetic memory devices. Since electroless plating method has many merits in mass production and product variety com­pared to sputtering method, many researches about electroless plating have been performed in the United State of America and Japan. However, electroless plating method has not been studied frequently in Korea. In these respects the purpose of this research is manufacturing Co-Mn-P alloy thin film on the corning glass 2948 by electroless plating method using sodium hypophosphite as a reductant, and analyzing deposition rate, alloy composition, microstructure, and magnetic characteristics at various pH's and temperatures. For Co-P alloy thin film, the reductive deposition reaction 0$\alpha$urred only in basic condition, not in acidic condition. The deposition rate increased as the pH and temperature increased, and the optimum condition was found at the pH of 10 and the temperature of $80^{\circ}C$. Also magnetic charac­teristics was found to be most excellent at the pH of 9 and the temperature of $70^{\circ}C$, resulting in the coercive force of 8700e and the squareness of 0.78. At this condition, the contents of P was 2.54% and the thickness of the film was $0.216\mu\textrm{m}$. For crystal orientation, we could not observe fcc for $\beta$-Co. On the other hand,(1010), (0002), (1011) orientation of hcp for a-Co was observed. We could confirm the formation of longitudinal magnetization from dominant (1010) and (1011) orientation of Co-P alloy. For Co-Mn-P alloy deposition, coercive force was about 1000e more than that of Co P alloy, but squareness had no difference. For crystal orientation, (l01O) and (lOll) orientation of $\alpha$-Co was dominant as same as that of Co- P alloy. Likewise we could confirm the formation of longitudinal magnetization.

• Journal of Mushroom
• /
• v.19 no.3
• /
• pp.200-209
• /
• 2021

In this study, a low-salt Lentinula edodes soybean paste (LSLESP) with improved palatability and storability relative to traditional Korean soybean paste was developed by utilizing low quality log cultivation of L. edodes. We also conducted quality characteristic analyses of spread jam made from low-salt L. edodes soybean paste (SJLLESP). The lowest salinity content and the highest L (brightness) value was found in LSLESP. According to proximate compositions analysis, crude protein, crude fat, and ash content were higher in commercial soybean paste than in LSLESP. Glucose, fructose, and maltose were the only free sugars detected in commercial soybean paste, whereas arabinose and fucose were additionally detected in LSLESP. Only two types of organic acid, were detected in common in commercially available soybean paste and LSLESP. Four types of organic acid, were detected in SJLLESP due to its added ingredients. The major free amino acids in commercially available soybean paste and LSLESP are histidine, glutamic acid, and arginine. Total amino acid, content was higher in LSLESP (54.81 mg%) than in commercial soybean paste (49.26 mg%). Total free amino acid, content in SJLLESP was 43.01 mg%. Ergosterol and β-glucan contents were highest in SJLLESP. The elevated ergosterol and β-glucan content in low-salt LSLESP relative to commercial soybean paste was significant. In conclusion, LSLESP and SJLLESP contain useful components from L. edodes, and offer the advantage of low salinity. LSLESP and SJLLESP could thus contribute to the development of health foods using L. edodes.