• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.200-211
• /
• 2022

The celadon stools with an openwork ring design which consist of four items as one collection were excavated from Gaeseong, Gyeonggi-do Province. The celadon stools were designated and managed as treasures due to their high arthistorical value in the form of demonstrating the excellence of celadon manufacturing techniques and the fanciful lifestyles during the Goryeo Dynasty. However, one of the items, which appeared to have been repaired and restored in the past, suffered a decline in aesthetic value due to the aging of the treatment materials and the lack of skill on the part of the conservator, raising the need for re-treatment as a result of structural instability. An examination of the conservation condition prior to conservation treatment found structural vulnerabilities because physical damage had been artificially inflicted throughout the area that was rendered defective at the time of manufacturing. The bonded surfaces for the cracked areas and detached fragments did not fit, and these areas and fragments had deteriorated because the adhesive trickled down onto the celadon surface or secondary contaminants, such as dust, were on the adhesive surface. The study identified the position, scope, and conditions of the bonded areas at the cracks UV rays and microscopy in order to investigate the condition of repair and restoration. By conducting Fourier-transform infrared spectroscopy(FT-IR) and portable x-ray fluorescence spectroscopy on the materials used for the former conservation treatment, the study confirmed the use of cellulose resins and epoxy resins as adhesives. Furthermore, the analysis revealed the addition of gypsum(CaSO₄·2H₂O) and bone meal(Ca₁₀ (PO₄)₆(OH)₂) to the adhesive to increase the bonding strength of some of the bonded areas that sustained force. Based on the results of the investigation, the conservation treatment for the artifact would focus on completely dismantling the existing bonded areas and then consolidating vulnerable areas through bonding and restoration. After removing and dismantling the prior adhesive used, the celadon stool was separated into 6 large fragments including the top and bottom, the curved legs, and some of the ring design. After dismantling, the remaining adhesive and contaminants were chemically and physically removed, and a steam cleaner was used to clean the fractured surfaces to increase the bonding efficacy of the re-bonding. The bonding of the artifact involved applying the adhesive differently depending on the bonding area and size. The cyanoacrylate resin Loctite 401 was used on the bonding area that held the positions of the fragments, while the acrylic resin Paraloid B-72 20%(in xylene) was treated on cross sections for reversibility in the areas that provided structural stability before bonding the fragments using the epoxy resin Epo-tek 301-2. For areas that would sustain force, as in the top and bottom, kaolin was added to Epo-tek 301-2 in order to reinforce the bonding strength. For the missing parts of the ring design where a continuous pattern could be assumed, a frame was made using SN-sheets, and the ring design was then modeled and restored by connecting the damaged cross section with Wood epos. Other restoration areas that occurred during bonding were treated by being filled with Wood epos for aesthetic and structural stabilization. Restored and filled areas were color-matched to avoid the feeling of disharmony from differences of texture in case of exhibitions in the future. The investigation and treatment process involving a variety of scientific technology was systematically documented so as to be utilized as basic data for the conservation and maintenance.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.2
• /
• pp.110-114
• /
• 2012

Purpose : PET/CT is widely used for early checking up of cancer and following up of pre and post operation. Image reconstruction method is advanced with mechanical function. We want to evaluate image quality of each reconstruction program based on time of flight (TOF). Materials and Methods : After acquiring phantom images during 2 minutes with Gemini TF (Philips, USA), Biograph mCT (Siemens, USA) and Discovery 690 (GE, USA), we reconstructed image applied to Astonish TF (Philips, USA), ultraHD PET (Siemens, USA), Sharp IR (GE, USA) and not applied. inside of Flangeless Esser PET phantom (Data Spectrum corp., USA) was filled with $^{18}F$-FDG 1.11 kBq/ml (30 Ci/ml) and 4 hot inserts (8. 12. 16. 25 mm) were filled with 8.88 kBq/ml (240 ${\mu}Ci/ml$) the ratio of background activity and hot inserts activity was 1 : 8. Inside of triple line phantom (Data Spectrum corp., USA) was filled with $^{18}F$-FDG 37 MBq/ml (1 mCi). Three of lines were filled with 0.37 MBq (100 ${\mu}Ci$). Contrast ratio and background variability were acquired from reconstruction image used Flangeless Esser PET phantom and resolution was acquired from reconstruction image used triple line phantom. Results : The contrast ratio of image which was not applied to Astonish TF was 8.69, 12.28, 19.31, 25.80% in phantom lid of which size was 8, 12, 16, 25 mm and it which was applied to Astonish TF was 6.24, 13.24, 19.55, 27.60%. It which was not applied to ultraHD PET was 4.94, 12.68, 22.09, 30.14%, it which was applied to ultraHD PET was 4.76, 13.23, 23.72, 31.65%. It which was not applied to SharpIR was 13.18, 17.44, 28.76, 34.67%, it which was applied to SharpIR was 13.15, 18.32, 30.33, 35.73%. The background variability of image which was not applied to Astonish TF was 5.51, 5.42, 7.13, 6.28%. it which was applied to Astonish TF was 7.81, 7.94, 6.40 6.28%. It which was not applied to ultraHD PET was 6.46, 6.63, 5.33, 5.21%, it which was applied to ultraHD PET was 6.08, 6.08, 4.45, 4.58%. It which was not applied to SharpIR was 5.93, 4.82, 4.45, 5.09%, it which was applied to SharpIR was 4.80, 3.92, 3.63, 4.50%. The resolution of phantom line of which location was upper, center, right, which was not applied to Astonish TF was 10.77, 11.54, 9.34 mm it which was applied to Astonish TF was 9.54, 8.90, 8.88 mm. It which was not applied to ultraHD PET was 7.84, 6.95, 8.32 mm, it which was applied to ultraHD PET was 7.51, 6.66, 8.27 mm. It which was not applied to SharpIR was 9.35, 8.69, 8.99, it which was applied to SharpIR was 9.88, 9.18, 9.00 mm. Conclusion : Image quality was advanced generally while reconstruction program which is based on time of flight was used. Futhermore difference of result compared each manufacture reconstruction program showed up, however this is caused by specification of instrument of each manufacture and difference of reconstruction algorithm. Therefore we need further examination to find out appropriate reconstruction condition while using reconstruction program used for advance of image quality.

• KSBB Journal
• /
• v.23 no.4
• /
• pp.329-334
• /
• 2008

The antioxidant activity and the qualitative analysis of Acanthopanax sessiliflorum Seeman were studied by partially purified extract using various methods: extraction by using ethanol solutions and temperatures, and absorption to Diaion HP20 column chromatography using 10%, 20%, 40%, 60% ethanol solutions. Major constituents, chlorogenic acid, caffeic acid, eleutheroside E, was determinated by HPLC method in Acanthopanax sessiliflorum S. 10% and 20% ethanol solutions contain chlorogenic acid (3.020$\pm$0.080%, 20.500$\pm$1.150%, respectively). 40% ethanol solution contains caffeic acid and eleutheroside E (12.270$\pm$0.360%, 1.670$\pm$0.140%, respectively). Diaion HP20 fractions (10%, 20%, 40%, 60% ethanol solutions) showed the scavenging activity of radicals and reactive oxygen species with the $IC_{50}$ values of $81.534{\pm}0.992{\mu}g/ml$, $1.748{\pm}0.098{\mu}g/ml$, $11.487{\pm}1.768{\mu}g/ml$, $21.960{\pm}0.547{\mu}g/ml$ against 1,1-diphenyl-2-picrylhydrazly radical and $1713.548{\pm}34.565{\mu}g/ml$, $131.419{\pm}2.235{\mu}g/ml$, $200.681{\pm}2.444{\mu}g/ml$, $757.897{\pm}6.868{\mu}g/ml$ against superoxide radicals in the xanthine/xanthine oxidase system, respectively. Especially, 20% and 40% ethanol fractions showed more antioxidant activity than dl-$\alpha$-tocopherol. These results suggest that Acanthopanax sessiliflorum S. extract and Diaion HP20 fractions may be useful as a potential source of nutraceutical and cosmetic products.

• Horticultural Science & Technology
• /
• v.33 no.3
• /
• pp.409-419
• /
• 2015

This study was conducted to establish an efficient screening method for watermelon plants resistant to Fusarium wilt (FW), which is caused by Fusarium oxysporum f. sp. niveum (Fon). An HA isolate was prepared from a wilted watermelon plant in Haman-gun and identified as F. oxysporum f. sp. niveum based on morphological characteristics, molecular analyses of ITS (internal transcribed spacer) and TEF (translation elongation factor $1{\alpha}$) sequences, and host specificity on cucurbits including watermelon, melon, oriental melon, and cucumber. The assay for disease response of watermelon differentials indicated that the HA isolate was race 0. Among seven liquid media tested, the highest amount of Fon spores was produced from V8-juice broth, which was selected as a medium for mass production of Fon. The disease assay for 21 watermelon and 11 watermelon-rootstock cultivars demonstrated that 20 watermelon cultivars except for 'Soknoranggul' were susceptible; 'Soknoranggul' was moderately resistant. All the tested rootstock cultivars were highly resistant to the HA isolate. The evaluation of disease development depending on various conditions suggested that an efficient screening method for FW resistance in watermelon plants is to dip the roots of 10-day-old seedlings in spore suspension of $1.0{\times}10^5-1.0{\times}10^6conidia{\cdot}mL^{-1}$ for 30 min., to transplant the seedlings to plastic pots with a fertilized soil, and then to cultivate the plants at $25^{\circ}C$ for 3 weeks.

• Journal of the Korean Geographical Society
• /
• v.30 no.4
• /
• pp.364-388
• /
• 1995

Even though rarely recognized as a separate approach, the institutional approach in geography is defined as an attempt to seek an explanation of the phenomena of geographical interest through focusing on the effects of institutional structure and actions. It can provide interdisciplinary links with other works and can offer complementary explanations for geographical interests. The concerns for institutions in geography can be found in early studies, the study of the state, the managerial approach, and the regulation approach. The Korean financial systems can provide good examples to apply institutional concepts into creating spatial outcomes, as it has been regarded as a useful tool to promote Korean economic development. Behind the current spatial pattern of financial systems, four different stages of institutional changes are identified in Korea. Each stage has different institutional features reflecting unique spatial implication.

• Journal of the HCI Society of Korea
• /
• v.12 no.2
• /
• pp.21-29
• /
• 2017

While the second and the third industrial revolutions made it possible a few standardized designs to be extracted and produced in large quantities, the recent development of the 3D printing technology allowed many individuals to reflect their unique personal characteristics on their creative works and produce them in large quantities-i.e., personally customized designs and mass production of various designs. However, for the customized designs and the mass production of various designs through the 3D printing technology, the individuals should use a 3D modeling software and the supporting features of the software can significantly affect the type and shape of a creative work. In this study, we surveyed the individuals who design the creative works using 3D printers about the type of software that they use and the type of creative works that they design using the software, to propose a possible direction of new software that supports their activities. To do this, we first surveyed sixty members of the OpenCreators, which is the largest 3D printing creator community in South Korea, about the 3D modelling Software that they use for their 3D printing creations, the best 3D modelling software for the 3D printing, and the type of frequently printing creation using the best 3D modelling software. We then analysed the response results. As a result, we found that most of 3D printing creators in South Korea use Rhino and 123D Design. More specifically, the Rhino was being widely used by the people in the 3D printing industry to print prototypes, samples, and mock-ups, while the 123D Design was being mainly used for general purposes such as educational tools, accessories, and home interior accessories. Therefore, we believe it is necessary to develop the software in two separated categories, i.e. for the business, like the Rhino, and for the beginners, and educational and personal purposes, like the 123D Design. Finally, we stressed and proposed the necessity to support individual creators by developing an industry-specific 3D modeling software.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.8 no.2
• /
• pp.75-82
• /
• 2013

This study was carried out to contribute to the self-help and sustainability of grassroots business in Gangwon-do. To achieve this, after setting up the concept of community business, understanding the current designating status of community business and analyzing the business content and the business promotion system, I tried to analyze the continuing factors of businesses and shops, which are more than hundred years old, in Japan and seek a solution to the sustainability of community business in the province. The community business in the province, which is designated and operated, is like this; 86 preliminary social businesses, 62 town businesses, 38 social businesses. The total comes to 186. The preliminary social businesses and the social businesses are assigned more in urban area and the manufacturing sector and educational field have a lot of business contents. When it comes to the business promotion system, there are many incorporated companies and limited companies. While the town businesses are assigned more in county area, the agricultural food field and cultural world have a lot of business contents. When it comes to the main participant of business, the agricultural corporations took the first place overwhelmingly. Especially, I found out that the main participants of community business consist of 38 voluntary associations, which is 20.4 %, and we need to make up for the specialty deficiency in business management. In order to keep the continuity of community business in the province, we could achieve the results of manpower development through the case analysis research, securing good materials which can give the consumers confidence, increasing the quality of the products, maintaining high technical skills, keeping up the tradition of business and demanding forecasting. I think a successive research efforts will be required for securing good materials and increasing the quality of the products in tandem with the local community. And also we need to establish a supporting & operating system through the liaison between the business & academic world, business & administration, and business & business for securing a management specialty as an industrialist.

• Journal of Mushroom
• /
• v.8 no.3
• /
• pp.122-130
• /
• 2010

Common mushroom production per area has been decreased and are up to less than 50% of the 1980 production. To determine the main reasons for the decrement, we performed this study. Two main reasons, which are mushroom disease and the low compost quality because of mechanized compost making, were assessed. In mechanized mushroom farms, nitrogen concentration in compost was lower than recommended and total compost quantity was about 100-150 $kg/3.3m^2$, which was also lower than usual. Our study revealed that higher nitrogen concentration (about 1.5%) in compost gave better production. Also, use of large amount of compost appeared to increase the mushroom production, although more insects and disease problems were observed. The relationships between the presences of microorganisms and occurrence of diseases were assessed by monitoring the microorganism densities near the mushroom farms. Higher number of microorganisms were observed near the mushroom farm area, compared to control region, Daechon beach. Most contaminating molds were found in the circulating fans, tunnel and culture room floor. The bacterial isolates were collected from the air in mushroom culture room and killed with 0.005% Benzalkonium solution, indicating treatment of Benzalkonium are the effective methods to sanitize the mushroom culture room.

• Proceedings of the Korean DIstribution Association Conference
• /
• 2001.11b
• /
• pp.125-141
• /
• 2001

In this paper, the current problems of logistics industry in Korea and their possible solutions were discussed. With Korea Telecoms KT-Logis, the supplier and demander of logistics service would not have to invest large sum of money into their computer system. All they need is just a computer with internet connected. What KT-Logis influence on the logistics industry are the following; 1. Many logistics service supplier and demander can do the business on the web with one computer system. 2. This web based computer system does not only work on the office but also apply on the field worker such as delivery personnel or even the forwarder with mobile phone. 3. KT-Logis is an integrated system which cover the broad arrange of logistics management from truck management to customer relations management. 4. Finally, KT-Logis is web based systems which suits for current e-business and mobile environment. In future, more studies should be done to develop more progressive integrated logistics information systems with enterprise resource planning(ERP) and supply chain management(SCM).

• Journal of Dairy Science and Biotechnology
• /
• v.29 no.1
• /
• pp.23-31
• /
• 2011

Domestic dairy industry is now standing at the crossroad for planning next fifty years, mainly because economic and environmental situations surrounding Korean peninsula are fast changing. For the aspects of dairy consumption, fresh milk consumed less, while consumption of the other milk and dairy products is slightly increasing every year. In 2010, it is approximately estimated that 1,939,000 tons of raw milk was used and the supply would be short by about 35,000 tons, based on the amounts in the previous year. Currently, multilateral negotiations against US and EU are underway. When it will be in effect in the future, significant damage would be expected in the dairy and livestock sectors, leading to cut domestic milk supply. Quality of farm-gate milk is graded as 1A on average 90% or more, loaded with very low in microbial and somatic cell counts. Therefore, policy implications have to be placed toward switch currently the UHT processing method to Pasteurization or the LTLT technology, by which natural flavors and nutrients in milk mostly remain after heat treatment. Domestic cheese products comprise only 10% and the rest is occupied by the various kinds of imported natural products. The market size keeps increasing up to 65,423,000 tons last year. When it comes to vitalization of our natural cheese industry, cheese whey, which is a main by-product in cheese manufacture, is a critical issue to be solved and also "On-Farm Processing" would be combined with a growth of big dairy companies when few immediate issues among the relevant regulations will be eased and alleviated in the near future. Fermented milk market is recorded as a single area of gradual increase in the past 10 years, Korea. Fermented yogurts with health claims targeted stomach, liver, and intestine are popular and has grown fast in sales amounts. In this context, researches on beneficial probiotic lactic acid bacteria are one of the important projects for domestic milk and dairy industries. Labelling regulations on efficacy or health-promoting effects of functional dairy products, which is the most important issue facing domestic dairy processors, should be urgently examined toward commercial expression of the functionality by lawful means. Colostrum, a nutrition-rich yellowish fluid, is roaded with immune, growth and tissue repair factors. Bovine colostrum, a raw material for immune milk preparations and infant formula, can be used to treat or prevent infections of the gastrointestinal tract. Nanotechnology can be applied to develop new milk and dairy products such as micro-encapsulated lactase milk for consumers suffering lactose intolerance. Raw milk is suggested to be managed by its usage in the processing line because imbalance of supply and demand is structural problem in every country and thus the usage systems as in the advanced dairy countries is worth of bench-marking to stabilize milk supply and demand. Raw milk produced is desirable to divide into the three parts; domestic, import, and buffering purposes. It is strongly recommended that a domestic dairy control center as an institutional framework should be urgently established as is Dairy Board in New Zealand and Australia. Lastly, government policy should be directed to foster the highly-educated people who are majoring in Dairy Sciences or working in the dairy industry by means of financial support in studying and training abroad as well.