• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.11
• /
• pp.2573-2584
• /
• 1997

In this paper, Ca, Sn substitute YIC(Yttrium Iron Garnet) ceramics were fabricated with Al substitutions in Fe sites. The strip-line circulator was designed and the properties of fabricated ciculator were measured. When the electric, magnetic and microwave properties were measured in Ca, Sn substituted YIG with Al subsititions, the relative permittivity and perfmeability in microwave frequencies were 15.623 and 0.972, repectively. For $Y_{2.4}Ca_{0.3}Sn_{0.3}Fe_{5-x}Al_xO_{12}$ garnet ceramics sintered at $1450^{\circ}C$, the ferrimagnetic resonance line width $\Delta{H}$) of 42 Oe and the saturation magnetization of 487 G were measured at 10 GHz. The strip-line circulator was simulated with 3-D FEM(Finite Element Method) software and designed to have insertion loss of 0.8dB, return loss of 25dB, isolation of 35dB at the center frequency of 1.9GHz. The fabricated strition loss of 0.8B, reture loss of 25dB, isolation of 35dB at the center frequency of 1.9GHz. The fabricated strip-line junction circulator using above YIG ceramics had insertion loss of 0.869dB, return loss of 26.955dB, isolation of 44.409dB at the center frequency of 1.9GHz.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.532-542
• /
• 2018

Because maglev trains have a propulsion and absorption force without contact with the rails, they can drive safely at high-speed with little oscillation. Recently, test model of a maglev propulsion train was produced and operated, and has since been chosen as a national growth industry in South Korea; there have been many studies and considerable investment in these fields. This study examined the dynamic responses due to bridge-maglev train interaction and basic material to design bridges for maglev trains travelling at high-speed. Depending on the major factors affecting the dynamic effects, the scope of this study was restricted to the relationship between dynamic responses. A concrete box girder was chosen as a bridge model and injured train and rail types in domestic production were selected as the moving train load and guideway analysis model, respectively. From the analysis results, the natural frequency of a bridge for a maglev train, which has a deflection limit L/2000, was higher than those of bridges for general trains. The dynamic responses of the girder of the bridge for a maglev train showed a substantial increase in proportion to the velocities of the moving train like other general bridge cases. Maximum dynamic response of the girder is shown at a moving velocity of 240km/h and increased with increasing moving velocity of train. These results can be used to design a bridge for maglev propulsion trains and provide the basic data to confirm the validity and verification of the design code.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2006.05a
• /
• pp.211-216
• /
• 2006

교통주제도는 건설교통부와 한국교통연구원이 ${\ulcorner}$국가교통DB구축사업${\lrcorner}$의 일환으로 제작한 것으로, 국토지리정보원의 NGIS 수치지도(축척 1:5,000)를 기반으로 하여 현장조사 및 문헌조사를 통해 갱신, 보완하여 교통 분야의 활용에 적합하도록 구축한 GIS 수치지도이다. 교통주제도는 현장조사와 문헌조사를 통해 수집된 자료를 기반으로 구축되며 이중 교통시설물조사는 문헌자료(준공도로현황 등)를 참고하여 산정된 조사대상에 대하여 GPS 조사시스템을 활용, 도형 및 속성정보를 취득하는 것을 말한다. 조사항목은 도형정보(노드, 링크) 및 속성정보(차선수, 도로번호 등)이며 GPS 조사시스템과 조사원장(도면)을 이용하여 조사한다. 교통시설물조사와 문헌자료조사를 통해 수집된 자료는 단위도엽(1:5,000기준)별로 교통주제도에 반영되며 최종적으로 전국단위의 통합자료로 구축된다 교통주제도는 사용목적과 축척기준에 따라 단순화되며 이를 교통주제도 레벨이라 한다. 교통주제도의 레벨은 총 4단계로 구분되며 현재 레벨2에서 레벨4까지 구축되고 있다. 교통분석용 네트워크는 교통시설투자계획, 수요분석, 타당성 평가와 같은 교통분야의 연구를 수행하기 위해 반드시 필요한 자료이다. 교통분석용 네트워크는 교통주제도보다 더 단순화된 도로망 모델로서 구성요소는 노드(시점, 종점, 죤 센트로이드)와 링크(도로망, 센트로이드 커넥터)이며 도로의 기하구조보다는 논리적 구조(방향성, 노드/링크 연결성 등)에 중점을 둔 데이터이다 교통분석용 네트워크는 교통주제도의 도형과 속성정보를 기반으로 하며 각종 통계자료(도로교통량통계연보 등)를 활용, 구축된다. 교통분석용 네트워크는 구축시점에 따라 현재 및 장래 네트워크로 구분되며 장래 네트워크는 기준년도부터 2031년까지 5년 단위로 계획된 장래도로를 반영하여 구축된다. 교통주제도 및 교통분석용 네트워크는 국가교통DB구축사업을 통해 구축된 자료로서 교통체계효율화법 제9조의4에 따라 공공기관이 교통정책 및 계획수립 등에 활용할 수 있도록 제공하고 있다. 건설교통부의 승인절차를 거쳐 제공하며 활용 후에는 갱신자료 및 활용결과를 통보하는 과정을 거치도록 되어있다. 교통주제도는 국가의 교통정책결정과 관련분야의 기초자료로서 다양하게 활용되고 있으며, 특히 ITS 노드/링크 기본지도로 활용되는 등 교통 분야의 중요한 지리정보로서 구축되고 있다.

• Spatial Information Research
• /
• v.12 no.3
• /
• pp.285-298
• /
• 2004

Transportation digital map has built based on NGIS (national geography institute's 1 :5000 digital database) which derived from the aerial photo materials. Transportation digital map is a part of National Transportation Database Building Project carried out by the Korea Transport Institute and Ministry of Construction and Transportation. Transportation digital map for the purpose of transportation plan and investment has been updated and corrected the NGIS database especially for road network. Transportation digital map database is essential basic data fully applied for transportation policy and planning. The database must be reliable and objective to be applied for national transportation policy decision and transportation analysis. In addition, it needs accuracy and currentness to reflect the road network for the survey year. To satisfy the purpose of the database, following steps are necessary first, data Production and building has to be done by guideline of survey and database building. Secondly, geometric and logical errors which can occur during the survey and database building should be carefully detected. Thirdly, sectional guideline for database examination and procedure needs to be set up systematically and coherently This study is about examination guidelines for section and procedure on nodes and links which are essential object in transportation digital map database. According to the type of error, consistent and systematic error examination can lead to quality guarantee for objective and reliable database.

• The Journal of Society for e-Business Studies
• /
• v.22 no.1
• /
• pp.1-13
• /
• 2017

Though digital imaging devices such as smart phones, digital cameras and office scanners have improved significantly over the past years, they are seldom used for industrial application. This may be attributable to high level of quality and performance requirement for industrial application, but there lacks a test or an objective evaluation whether the upgraded performance of entry-level device is sufficiently enough to replace existing industrial equipments or not. If there exists an industrial application area where the applicability of entry-level equipment is proved by some objective tests, then companies will be able to reduce investment on expensive industrial equipment. In this study, applicability of entry-level digital devices for color difference discrimination of PVC (Polyvinyl chloride) color sheet is tested. By testing smart phone, digital camera, and office scanner for color difference discrimination, authors have found that office scanner shows consistent result with less measurement error. Additional experiment on comparing office scanner with industrial spectrophotometer has confirmed that there exists high correlation between the two devices' results. Based on this result, office scanner may be applicable to discriminate the color difference of PVC sheet instead of expensive industrial spectrophotometer if proper management criteria are established.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.251-258
• /
• 2016

This article reports current status of micro fuel cell-combined heat and power (${\mu}FC$-CHP) systems which utilize both power and heat generated by fuel cells. There are several options for constructing CHP systems and among them, fuel cells are the most useful and their total energy efficiency combining heat and power can reach up to about 90%. Fuel cells are classified as five types based on the electrolyte, but the most suitable fuel cell types for the ${\mu}FC$-CHP system are proton exchange membrane fuel cells (PEMFCs) and solid oxide fuel cells (SOFCs). ${\mu}FC$-CHP systems have several advantages such as decrease of the transmission-distribution loss, reduced costs of electricity due to distributed power generation, and environmental-friendliness owing to zero emission. The main drawback of the ${\mu}FC$-CHP systems is the high initial investment, however, it keeps decreasing as the technology development reduces production costs. Currently, Japan is the most leading country of the ${\mu}FC$-CHP market, however, Korea tries to expand the market by planning the deployment of 1 million units of ${\mu}FC$-CHP systems and governmental subsidiary supporting of half of the install price. In this report, integration technologies for connecting FC and CHP, and technology trends of leading countries are presented as well.

• Journal of Korean Home Economics Education Association
• /
• v.18 no.4 s.42
• /
• pp.103-126
• /
• 2006

This study was to develope and applicate the consumer education program with appropriate level for middle school students so that they could take systematic consumer education by using creative-discretionary activity. The procedure of this study was researching and analyzing the degree of learner's need and choosing the contents of education involved with the characteristics of adolescent consumers. This education program was performed at creative-discretionary activity class with the 3th grade of middle school. To evaluate the effect of education program, we compared with the difference of student's knowledge and attitude before and after this program was performed. Although there was no significant difference, student's knowledge and attitude was improved much better. And there marked a high satisfaction rate of 3.87 about the overall method of consumer education.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.5
• /
• pp.128-137
• /
• 2006

This paper is to develop curtain wall process life-cycle system in high-rise buildings in order to establish effective cooperation communication channels among the diverse constituents. This paper is to provide a base toward a curtain wall life-cycle management system to support decision making and the effective flow in light of information and materials. The four objectives of the research are 1) the analysis of the current curtain wall life-cycle process, 2) the analysis and development of the curtain wall design process As-Is model, and 3) the Muda analysis of the design process As-Is model and the suggestion of the improvements, 4) the development of curtain wall design To-Be model and comparative analysis of the improvement in terms of value streams. This research indicates the wastes decrease (or the values increase) from 6.7% up to 100% in different decision criteria through the improvement by the comparative analysis between the As-ls and To-Be curtain wall design process. This research suggests the potential improvement by VSM and a curtain wall life-cycle management system in curtain wall construction for diverse constituents be significant.

• Cartoon and Animation Studies
• /
• s.36
• /
• pp.511-551
• /
• 2014

This study has examined genre tastes of Hollywood movies in Korea. A concept of cultural discount suggests that Hollywood film in foreign countries would be received differently according to its specific attributes. Following the suggestion of cultural discount, this study examines how local reception of Hollywood movies is different in Korea, focusing on film genre, production budget, and U.S. box office. The results show that genres are useful variables for such analysis, indicating that certain film genres are indeed suffering from relatively high cultural discount at the level of Hollywood movie import/distribution. Comedy, specifically, constitutes the crucial particularistic movie genre. However, this study does not find out any significant effect of movie genres on the box office in Korea, controlling the effect of U.S. box office and production budget. As Hollywood studios have recently produced multi-genre movies rather than genre-specific movies to induce a variety of audience who have different movie tastes, the influences of cultural discount disappeared among imported Hollywood movies in Korea. This study also reveals that Hollywood movies of high production budget and of successful U.S. box office are more preferred in Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6274-6281
• /
• 2015

Radio-based train control system has driving headway shortening effect by real-time train interval control using two-way radio communication between onboard and wayside systems, and reduces facility investment because it does not require any track-circuit. Automatic train protection(ATP), the most significant part of the radio-based train control system, makes sure a safe distance between preceding and following trains, based on real-time train location tracing. In this paper, we propose the overall ATP train interval control algorithm to control the safe interval between trains, and preprocessing-based speed profile calculation algorithm to improve the processing speed of the ATP. The proposed speed profile calculation algorithm calculates the permanent speed limit for track and train in advance and uses as the most restrictive speed profile. If the temporary speed limit is generated for a particular track section, it reflects the temporary speed limit to pre-calculated speed profile and improves calculation performance by updating the speed profile for the corresponding track section. To evaluate the performance of the proposed speed profile calculation algorithm, we analyze the proposed algorithm with O-notation and we can find that it is possible to improve the time complexity than the existing one. To verify the proposed ATP train interval control algorithm, we build the train interval control simulator. The experimental results show the safe train interval control is carried out in a variety of operating conditions.