• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.2
• /
• pp.1-8
• /
• 2011

In this paper, we propose a haptic display system that can convert Braille and tactual map(braille map) to tactile information recognizable through sense of touch almost in real-time. The proposed system consists of a haptic display hardware device, which actually delivers tactile signal to visually impaired people, and a device control software program, which converts Braille and tactile information to tactile signal and transfers it to the hardware device. Experimental evaluations of the proposed system were performed with 10 visually impaired persons. Experimental results show that the proposed system can provide similar Braille recognition rate and speed to those of existing Braille information devices. In addition, the proposed system converts tactile information to tactile signal under maximum 1.1 seconds, so that it can provide graphic information in almost real-time which is not possible with existing tactile devices, such as Braille printer.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.5 s.335
• /
• pp.39-46
• /
• 2005

This paper introduces a new At-speed Interconnect Test Controller (ASITC) that can detect and diagnose dynamic as well as static defects in an SoC. SoC is comprised of IEEE 1149.1 and P1500 wrapped cores which can be operated by multiple system clocks. In other to test such a complicated SoC, we designed a interface module for P1500 wrapped cores and the ASITC that makes it possible to detect interconnect delay faults during 1 system clock from launching to capturing the transition signal. The ASITC proposed requires less area overhead than other approaches and the operation was verified through the FPGA implementation

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.5
• /
• pp.23-32
• /
• 2015

The advanced receiver which can manage inter-cell interference is required to cope with the explosively increasing mobile data traffic. 3rd Generation Partnership Project (3GPP) has discussed network assisted interference cancellation and suppression (NAICS) to improve signal-to-noise-plus-interference ratio (SINR) and receiver performance by suppression or cancellation of interference signal from inter-cells. In this paper, we propose the novel hybrid receiver Full Suppression Cancellation (FSC) to reduce the interference from neighbor cell in backhaul system. The proposed receiver can suppress and cancel the interference by combining Interference Rejection Combining (IRC) with Successive Interference Cancellation (SIC). We perform the system level simulation based on 20MHz bandwidth of 3GPP LTE-Advanced system. Simulation results show that the proposed receiver can improve error rate and throughput of conventional system.

• Journal of Broadcast Engineering
• /
• v.22 no.5
• /
• pp.560-569
• /
• 2017

Recently as the studies on the combined delivery over multiple transmission media are progressed, studies using MMT which is next-generation multimedia transport standard are underway. They are about transmitting video data layered by SHVC through broadcasting network and communication network based on MMT. However, it is difficult to serve synchronized UHD contents in heterogeneous network environment based on MMT, because MMT standard doesn't fully specify the information to indicate the relationship between media. Also, the service that we want to propose in this paper is a broadcasting-based service such as terrestrial broadcasting. Therefore the user must be able to watch various contents continuously. However, the MMT PI(Presentation Information) that controls the spatio-temporal layout of a content has been described as providing only one content. In this paper, we propose the structure of MXD document and MMT PI to provide continuous UHD contents service based on heterogeneous network.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.8
• /
• pp.472-483
• /
• 2002

This paper presents the design and implementation of a cache file system, umcFS, which is specifically designed to provide an efficient caching and transmission of streaming media. The proposed file system is based on the concept of file disk and implemented as an application level on top of a general-purpose file system. The file disk favors the continuity of cached media and provides an efficient I/O mechanism for cache server. umcFS statically allocates control blocks as well as media cache blocks. These blocks are referenced by the single-level indirect management structure. As the file system is designed as an application level, it is easy to develop and port to other systems. The performance of the implemented system shows that umcFS performs about 13% better than the native file system in randomly accessing the cache blocks of 1024KB.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.1
• /
• pp.35-41
• /
• 2002

It is extremely important to minimize network access time in constructing a high-performance PC cluster system For an SCI based PC cluster it is possilbe to reduce the network access time by maintaining network cache in each cluster node, This paper presents a CC-NUMA card that utilizes network cache for SCI based PC clustering The CC-NUMA card is directly plugged into the PCI solot of each node, and contains shared memory network cache, and interconnection modules. The network cache is maintained for the shared memory on the PCI bus of cluster nodes. The coherency mechanism between the network cache and the shared memory is based on the IEEE SCI standard. A CC-NUMA prototype card is developed to evaluate the performance of the system. According to the experiments. the cluster system with the CC-NUMA card showed considerable improvements compared with an SCI based clustser without network cache.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.2 s.344
• /
• pp.66-75
• /
• 2006

This paper addresses the implementation of FTTH system based on Ethernet PON technololy. This system consists of OLT and ONT. OLT supports the maximum 24 Gigabit Ethernet interfaces, and then has the flexibility and the scalability for supplying digital communication and broadcasting convergence service in the near future. OLT system consists of switch module, subscriber module, processor module, and E-PON link module, and has the operating system based on Linux. ONT is installed in customer premise to supply both IP-TV and Internet service. Also ONT has the dedicated interface for IP-TV to improve the transmission characteristics of IP-TV signal. We measure the performance of E-PON MAC through this system and then QoS control characteristics per franc in ONT by separating the virtual link for IP-TV from that for data.

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.466-472
• /
• 2003

In this paper, we proposed an optical true time-delay (TTD) feeder system for phased array antennas (PAAs). The system possesses high-speed beam scan capability since, in this scheme, different lengths of fiber delay-lines are selected by optical 2${\times}$2 MEMS switches at high speed. An optical TTD capable of beam scanning in one of eight different directions has been built for 10 GHz linear PAA systems. Experimental results on time delay measurements show that the maximum time delay error is less than 0.2 ps corresponding to a scan angle error of less than 0.84o. We have also designed a 10 GHz linear PAA composed of eight micro-strip patch antenna elements driven by the proposed TTD, and the radiation patterns of this PAA have been analyzed by simulation.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.1
• /
• pp.10-18
• /
• 2000

This paper proposes a fuzzy logic cross-coupled controller using a new contouring modeling for a two-axis servo system. The general decoupled control approach may result in degraded contouring performance due to such factors as mismatch of axial dynamics and axial loop gains. In practice, such systems contain many uncertainties. The cross-coupled controller utilizes all axis position error information simultaneously to produce accurate contours. However, the conventional cross-coupled controllers cannot overcome friction, backlash, and parameter variations. Also since, it is difficult to obtain an accurate mathematical model of multi-axis system, here we investigate a fuzzy logic cross-coupled controller of servo system. In addition, new contouring error vector computation method is presented. The experimental results are presented to illustrate the performance of the proposed algorithm.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.6
• /
• pp.49-56
• /
• 2007

In this paper, the development of excitation light source is proposed for excitation light of the photodynamic therapy of cancer. Since the selection of the wavelength band of excitation light has an interrelation with fluorescence generation according to the selection of a photosensitizer. This study aims at designing and evaluating light source that can stably generate light with various kinds of wavelengths in order to make possible photodynamic diagnosis using a photosensitizer and diagnosis using auto-fluorescence. The light source device was a Xenon lamp and filter wheel, composed of an optical output control through iris and filters with several wavelength bands. It also makes the inducement of auto-fluorescence possible because it is designed to generate a wavelength band of 380-420nm, 430-480nm, 480-560nm. The transmission part of the light source was developed to enhance the efficiency of light transmission. To evaluate this light source device by KFDA#s technical reference, the characteristics of the light output and wavelength band were found.