• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.407-410
• /
• 2011

본 연구에서는 탑승객의 안전과 국내 환경에 적합한 제동거리 확보를 위해 새로운 개념의 스프링을 사용한 제동장치를 설계하고자 한다. 새로운 제동장치에 사용되는 스프링은 변위에 따라 감쇠 성능 특성을변화시키는 Multi-Rate 변위 감응형 스프링을 최적화하여 적용하였다. 이를 위한 최적화 기법으로는 비선형 최적화 기법인 순차적 2차계획법(Sequential Quadratic Programming, SQP)을 사용하였으며 먼저 Ziprider의 운동을 제동거리와 제동시 발생하는 회전각의 관계로 표현 가능한 수치모델을 개발하였다. 또한 개발된 수치모델은 Matlab을 이용하여 코드화하고 그 결과를 RecurDyn과 비교 분석하였다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1995.06b
• /
• pp.7-13
• /
• 1995

현재 교통인구 비중에 큰 비중을 차지하고 있는 철도 차량은 기술의 발전으로 인한 고속화에 성공하여 300km/h대의 속도를 달성하기에 이르렀다. 열차가 고속화됨으로 인하여 열차 주행시 운동에너지가 더욱 커졌고 이를 소산하기 위한 제동 역시 더욱 중요하게 되었다. 열차의 제동시 중요한 점은 wheel의 skidding을 방지함으로 wheel의 편마멸을 줄이는 것이며 이를 위해선 제동장치의 설계시 wheel과 rail간의 점착현상의 이해가 필수적이다. 제동력이 점착력보다 클 경우는 skidding이 발생하며 제동력이 점착력보다 작은 경우는 충분한 제덩을 하지 못한다는 것을 의미한다. 그러므로 열차의 제동장치를 설계함에 있어서 점착계수는 필수적인 요소가 되었으며 미국, 일본, 독일 등의 선진 각국에서는 점착계수를 측정하여 그 특성을 파악하려는 실험이 실험실 및 실차 차원에서 많이 행하여졌다. 각각 다른 접척조건, 속도 등에 따른 실험이 진행되어 왔으나 각 연구의 결과는 조금씩 다른 결향을 나타내었고, 점착현상에 관한 물리적인 설명은 못하고 있는 실정이다. 본 연구에서는 wheel과 rail의 접촉인 경우에 있어 점착현상의 변화를 속도, 하중, 접촉조건에 따른다고 보고 점착현상의 특성을 각각 sliding, pure rolling실험을 통해 파악하고 기타 참고문헌에서 발표된 점착계수와 비교하여 물리적으로 이해하고자 하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1307-1308
• /
• 2011

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.4
• /
• pp.29-36
• /
• 1998

In this paper, two-stage braking method of 3-phase induction motrois proposed. This brake involves tow stages. The first stage is capacitor self-excitation braking, and the second stage is three-phase magnetic braking. In several applicatons, a low cost and effective brake is required for three-phase induction motor. A mechanical friction brake, typical braking method for induction motor requires external energy sources which is not safe, expensive and requires maintenance. Static and dynamic analyses of the proposed brake scheme are along with analytical result, simulated waveforms and experimental waveforms are compared. The experimental results shows good agreement with the simulated results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.199-207
• /
• 2021

This study aimed to improve the performance of the KTX (Korea Train Express) brake system. To develop a braking disc-hub for the high-speed rail, the model performance was analyzed by finite element analysis, and the analysis results were verified using the braking test results. In addition, heat transfer analysis, thermal stress analysis, natural frequency analysis, and static analysis were conducted to examine the mechanical performance of the braking system. By deriving the design factors and conducting parametric analyses according to the shape of the hub, this study derived the optimal specifications that could improve heat dissipation and reduce weight. The cooling efficiency and structural performance of the optimization model were improved during braking compared to the existing model. It is expected that the design verification will be carried out through analyses of the optimal specifications so that it can be used in the development of brakes in railway vehicles and motor vehicles.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.83-86
• /
• 2011

최근 에너지/환경의 문제로 HEV(Hybrid Electric Vehicle)이 대두되고 있는데, HEV를 위한 대표적인 기술로서 제동시 에너지로 발전하여 전기를 회수하는 회생제동이 있다. 회생제동기술은 HEV 뿐만 아니라 건설기기, 하이브리드 버스, 전철, 엘리베이터 등에 폭넓게 활용이 가능하다. 회생제동용 에너지 저장원으로서는 고출력 및 환경특성이 우수한 슈퍼캐패시터가 적합하며, 단일 셀이 아닌 수십 ~ 수백 개의 셀이 모듈로 사용되는 만큼, 모듈화 설계 기술이 필요 하다. 수백 개의 셀을 모듈화하기 위해서 개별 셀의 전압을 모니터링 하는 기술과 충방전 시 밸렌싱 하는 기술, 사용환경에 따라 열 관리 기술이 필요하며, 이들 기능을 수행할 수 있는 통합 시스템을 구비하여 안정성과 성능 향상을 하고자 한다.

• Journal of Korean Society of Transportation
• /
• v.29 no.3
• /
• pp.115-122
• /
• 2011

This paper investigates the accuracy of the vehicle pre-braking speed estimated based upon measured skidding distance. Driver ordinarily takes sudden braking when urgent situation is developed in the front or when the driver is involved in an unexpected situation, and the driver may be inflicted upon an accident depending on the required stopping distance. Among factors influencing the stopping distance of vehicle such as recognition response time of driver, performance of vehicle's braking device, and state of road surface etc, pre-braking speed is seemingly the most important influencing factor. Currently, in the investigating section of traffic accidents, the state of overspeed is determined by the pre-skidding speed calculated based on the length of skid mark. In order to identify the accurate cause of the accident, it is strongly recommended that estimation of pre-braking speed should be estimated taking into account speed reduction during transient time. In this study, we propose a method for estimating more accurate exact speed information of vehicle at the time of traffic accident. The outcomes from this study potentially help better understanding of the characteristics of vehicle for traffic safety in the future.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.7
• /
• pp.653-660
• /
• 2009

A helicopter rotor brake system stops or reduces the speed of the rotor by transforming the kinetic energy into the heat energy. The frictionally generated heat has a considerable effect on the frictional property of material itself and causes the change of the friction coefficient which may affect the breaking time significantly. In this paper, to take into account the effect of change of friction coefficient according to temperature on braking time, thermo-mechanically coupled analysis is carried out by commercial software ABAQUS. Further, simple theoretical equation is derived considering thermo-mechanical behaviors. The predicted braking times both from theoretical and numerical methods are compared and validity of proposed theoretical equation is investigated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1555-1556
• /
• 2011

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.25 no.2
• /
• pp.18-24
• /
• 2017

Results of the experimental research are described in this thesis, which are about braking characteristics of aircraft ABS brake system with different ground conditions. Dynamo-tests were conducted with the state of the application aircraft condition and with two different ground conditions. The Braking characteristics on each ground condition were drawn from the results of occurrence of skid, braking distance and deceleration. The braking performance of the application aircraft could be anticipated and the efficient range of braking operation could be set with those results.