• 전기의세계
• /
• v.26 no.4
• /
• pp.8-11
• /
• 1977

공업기술의 발전에 따라 전동기의 용도도 다양화되고 기계의 기진 정상 정전에서 역전으로 바꾸는것을 기계적 방법보다 전동기의 기동제동 plugging운전방법으로 이송할 때 기계의 고효율화, 기구의 간소화가 된다. 그러나 이러한 다송운전이 빈번할 때 일반전동기로서는 신뢰도가 문제가 되므로, 이 용도에 적합한 특성을 가지는 운동기를 개정함으로서 신뢰도가 높도록 해야 한다. 이런 종류의 용도로 사용되는 용형전동기로서는 특성상 기동 Torque, 가속 Torque가 크고 단시간에 기동하며 Plugging에 적합하고 Dynamic Brake에도 지장이 없어야 하며, 온도상승의 점에서는 기동중에 1차동손이 적고 2차고저항인것이 요구된다. 또 구조상에서는 Inertia가 작으며 급속한 기동이 제일 먼저 요구된다. 만약 기동중에 발열하는 부분의 열용량이 크며 부하 Inertia도 커서 기동시간이 수10초를 걸린다면 국부적으로 대단히 높은 온도상승을 하게 되고, 가혹한 Plugging운전을 하는 경우는 열적 및 기계적으로 고도의 신뢰성이 요구된다. 이에 적합한 Cycle Starting Motor를 시작하여 본 결과를 경험을 토대로 다목적으로 연구검토하여 여기에 소개하고자 한다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.5
• /
• pp.507-511
• /
• 2019

The use of regenerative energy in AC drive systems has been an issue since the system became an industry standard in the 1990s. According to the quantity of the regenerative energy, the braking resistor in the case of low capacity was common. However the use of such low amount of energy is actively discussed, and the method of mounting the regenerative converter is becoming popular. In this paper, an isolated regenerative converter for reducing the circulating current which is mentioned as the biggest disadvantage of the conventional power regenerative converter system is proposed. In order to save energy, employing a power regenerative converter system for utilizing regenerative energy in an AC drive system is common. However due to the structure of the system, a circulating current is generated, which inevitably causes a decrease in efficiency. In this paper, an isolated regenerative power converter system is proposed to solve the circulating current and computer simulation to verify the possibility. The simulation results show that 20% of the circulating current of the conventional system does not appear in the proposed system, and the validity of the proposed system is confirmed.

• Journal of Navigation and Port Research
• /
• v.38 no.6
• /
• pp.585-591
• /
• 2014

The primary objective of the current work is to predict speed performance of the medium patrol boat over $F_N=0.5$ employing experimental materials based on the CFD before model tests. In other words, the predicted brake powers according to ship speeds are assessed satisfying the main engine capacity. The subject ships are selected the two different stern hull forms. The flow computation are conducted considering free surface and dynamic trim using a commercial CFD code(STAR-CCM+). The resistances of the bare-hull are obtained from CFD. Wave patterns, pressures and limiting streamlines on the hull and velocity distribution in the propeller plane for the two hull forms are compared using CFD. The effective powers of the object ships are assessed based on CFD. Resistance increase according to the attached appendages and quasi-propulsive efficiency are employed the experimental datas. Speed performance prediction method concerning high speed vessels like a medium patrol boat is developed employing CFD and experimental data.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.5
• /
• pp.552-557
• /
• 2014

The objective of the This study is to access the speed performance employing the sea trial test and CFD with the our own designed and manufactured one-man boat. The overall design process including hull form design was explained. The sea trial was carried out with a manufactured boat in the clam sea. Brake power at the design speed of a boat through the sea trial was measured as 1680 W. The flow computation was conducted considering free surface and dynamic trim using a commercial CFD code(STAR-CCM+). The result of computation provided the information that residual resistance is bigger than fraction's at design speed. The total efficiency were predicted based on the sea trial and CFD. The Total efficiency was divided into shaft efficiency and quasi-propulsive efficiency. By using quasi-propulsive efficiency, it becomes possible to predict speed performance of boat in future. The results can provide information regarding hull form design, performance analysis and development of a boat in future.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.5
• /
• pp.627-633
• /
• 2019

This study aimed to predict the resistance and propulsion performance of a ship using computational fluid dynamics (CFD) and a database as well as establish an assessment method for the energy efficiency design index (EEDI) using the results. First, the total resistance of the studied ship is obtained using CFD. A flow analysis is conducted with the free surface and trim and sinkage using a commercial CFD code (STAR-CCM+). The effective power of the ship is assessed based on the CFD results. The quasi-propulsive efficiency is calculated from an empirical prediction equation using experimental data and similar material. Finally, a general calculation program for the EEDI is established based on the hydrodynamic results, ship information for principal particulars, conversion factor of $CO_2$ for fuels, and fuel consumption.

• Journal of the Korean Society for Railway
• /
• v.12 no.4
• /
• pp.582-589
• /
• 2009

The energy generated by braking vehicle would simply be converted into waste heat by its braking resistors if no other vehicle is accelerating at exactly the same time. Up to 45% of the tractive power of vehicles capable of returning energy to the power supply can be regenerated during braking and that this energy can be used to feed vehicles which are accelerating at the same time. Such synchronized braking and accelerating can not be coordinated, the ESS(energy storage system, here after) stores the energy generated during braking and discharges it again when a vehicle accelerates. The ESS is able to store and discharge energy extremely quickly, consequently enabling a complete exchange of energy between vehicles, even if they are not braking and accelerating at precisely the same time, as is most frequently the case in everyday service. The energy saving rate is related to the headway. If the headway is long/short, the energy saving goes up/down, When the headway is short, the ESS can not save much regenerative energy. The headway of SeoulMetro line 2 as the worst case is very short in Korea urban transit system. So, the energy saving rate will be very low. If the ESSs are applied to another railway system, we can expect that the effectiveness is better than the results of SeoulMetro line 2. This paper presents effects of energy saving obtained by applying the ESS to SeoulMetro line 2.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.6
• /
• pp.61-66
• /
• 2012

Conventional method to transform vehicle driving condition to engine operation mode is to use vehicle road load under neutral gear and mechanical efficiency of drivetrain. But this method requires additional measurement of efficiency of drivetrain on a test rig. And this measurement is normally done at fixed speed and thus estimated accuracy of engine operation mode is not considered to be high enough. This study suggests new method to calculate engine operation mode for prescribed driving mode such as NEDC using vehicle coastdown test under gear engaged condition without measurement of mechanical efficiency of drivetrain. Coastdown test was done under neutral and gear engaged condition for comparison and also trial to extract mechanical loss of drivetrain was carried out. Calculated engine torque by conventional and newly suggested method was compared with actually measured torque of a vehicle on a chassis dynamometer during NEDC. Newly suggested method showed slightly higher accuracy of accumulated brake work during NEDC.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.182-185
• /
• 2011

본 논문에서는 국내 고속철도 차량 즉, 경부고속철도를 운행하는 KTX, KTX산천 그리고 현재 개발중인 HEMU400x을 대상으로 운행속도 및 운행패턴에 따른 열차 소비전력을 분석하였다. 이를 위해, 선로조건을 고려한 차량의 운전속도 조건과 운행시간,소비전력 등을 예측하기 위한 TPS(Train Performance Simulation)프로그램을 이용하였다. 열차운행 시뮬레이션을 수행하기 위해선 차량, 선로, 속도의 기본 데이터를 필요로 한다. 차량에 대한 데이터는 차량의 최고속도, 제동성능, 견인력 등의 기본 성능과 열차편성에 따른 중량, 길이, 동력차량형식, 열차주행저항등에 대한 제원을 요한다. 선로데이터는 운행시간 예측을 대상으로 하는 선로에 대한 거리별 구배 및 선형, 정거장 위치 및 정차시간에 대한 데이터이다. 속도조건은 구배 및 곡선에 대한 선로제한속도로, 선로데이터와 연계하여 각 선로위치별 차량의 제한속도로 이용된다. 본 논문에서는 경부고속철도 구간에서 운행하는 고속차량 3가지를 대상으로 증속에 따른 전력소모량을 비교하였다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.1
• /
• pp.11-22
• /
• 2018

The safety of tunnels is quantified by quantitative risk assessment when planning the disaster prevention facilities of railway tunnels, and it is decided whether they are appropriate. The purpose of this study is to estimate the probability of the train stopping in the tunnels at train fire, which has a significant effect on the results of quantitative risk assessment for tunnel fires. For this purpose, a model was developed to calculate the coasting distance of the train considering the coefficient of train running resistance. The probability of stopping in case of train fire in the tunnel is predicted by the Monte Carlo simulation method with the coasting distance and the emergency braking distance as parameters of the tunnel lengths and slopes, train initial driving speeds. The kinetic equations for predicting the coasting distance were analyzed by reflecting the coefficient train running resistance of KTX II. In the case of KTX II trains, the coasting distance is reduced as the slope increases in a tunnel with an upward slope, but it is possible to continue driving without stopping in a slope downward. The probability of the train stopping in the case of train fire in tunnel decreases as the train speed increases and the slope of the tunnel decreases. If human error is not taken into account, the probability that a high-speed train traveling at a speed of 250 km/h or above will stop in a tunnel due to a fire is 0% when the slope of the tunnel is 0.5% or less, and the probability of stopping increases rapidly as the tunnel slope increases and the tunnel length increases.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.6
• /
• pp.538-545
• /
• 2001

In this paper a gearless drive system using a permanent-maget synchronous motor for high speed elevators is addressed. The application of permanent magnet synchronous motor to an elevator traction machine enables several improvements including higher efficiency better ride comfort smaller size and lighter weight and so on A PWM boost converter has been also adopted so that DC-link voltage regulation bi-directional power flow and controllable power factor with reduced input current harmonics are possible. To increase the reliability and performance of overall control system the unified control board which can include the car and group controller as well as PWN converter/inverter controller has been designed based on a DSP TMS320VV33. In addition the dynamic load simulator system has been developed so that the drive system of high speed elevator can be tested and evaluated without and limitation on ride distance. Some experimental results are given to verify the effectiveness of the developed system.