Journal of the Korean Society of Marine Environment & Safety (해양환경안전학회지)

The Korean Society of Marine Environment and safety (해양환경안전학회)
권호 표지
DOI QR코드

DOI QR Code

Study on the Evaluation Method for EEDI of the Small Vessel using CFD

CFD 기반 소형 선박의 EEDI 평가 방법에 관한 연구

  • Park, Dong-Woo (School of Naval Architecture & Ocean Engineering, Tongmyong University)
  • 박동우 (동명대학교 조선해양공학부)
  • Received : 2019.07.29
  • Accepted : 2019.08.28
  • Published : 2019.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

This study aimed to predict the resistance and propulsion performance of a ship using computational fluid dynamics (CFD) and a database as well as establish an assessment method for the energy efficiency design index (EEDI) using the results. First, the total resistance of the studied ship is obtained using CFD. A flow analysis is conducted with the free surface and trim and sinkage using a commercial CFD code (STAR-CCM+). The effective power of the ship is assessed based on the CFD results. The quasi-propulsive efficiency is calculated from an empirical prediction equation using experimental data and similar material. Finally, a general calculation program for the EEDI is established based on the hydrodynamic results, ship information for principal particulars, conversion factor of $CO_2$ for fuels, and fuel consumption.

본 논문의 주 관심사항은 전산유체역학과 기존 모형시험 데이터를 활용하여 주어진 선박의 저항 및 추진성능을 추정하고 그 결과를 이용하여 에너지효율설계지표(Energy Efficiency Design Index, EEDI)를 평가하는 방법을 제시하는 것이다. 대상선박의 모형선 크기에서의 전 저항을 계산하기 위해 점성 유동 해석을 수행하였다. 유동계산은 STAR-CCM+를 사용하였으며 자유표면, 트림과 싱키지를 고려하였다. 점성 유동 해석 결과를 바탕으로 대상선박의 유효동력을 산정하였다. 준 추진효율 계수는 기 보유한 모형시험 데이터베이스를 이용한 추정식 및 유사선박의 시험자료를 활용하여 산정하였다. 최종적으로 EEDI 산정식에 대하여 유체동역학적 결과, 선박의 정보, 사용하는 연료에 대한 $CO_2$의 환산계수, 연료소모량 등을 바탕으로 일반화된 계산 프로그램을 작성하였다.

Keywords

References

  1. Holtrop, J.(1988), A Statistical Prediction Method with a Speed Dependent Form Factor, SMSSH'88, Varnar.
  2. ITTC(1978), Report of Performance Committee, 15th ITTC, Hague.
  3. Park, D. W.(2018a), Assessment of the Resistance Performance of Hull Appendages Attached to Fishing Vessels Using CFD, Journal of the Korean Society of Marine Environment & Safety, Vol. 24, No. 2, pp. 267-274. https://doi.org/10.7837/kosomes.2018.24.2.267
  4. Park, D. W.(2018b), Resistance Performance Map through Studies on the Dimension Parameters of the Bilge Keel attached on the Fishing Vessel, Journal of the Korean Society of Marine Environment & Safety, Vol. 24, No. 5, pp. 583-590. https://doi.org/10.7837/kosomes.2018.24.5.583
  5. Park, I. R., J. Kim and S. H. Van(2004), Analysis of Resistance Performance of Modern Commercial Ship Hull using a Level-set Method, Journal of the Society of Naval Architects of Korea, Vol. 41, No. 2, pp. 79-89. https://doi.org/10.3744/SNAK.2004.41.2.079
  6. Park, D. W., S. B. Lee, S. S. Chung, H. W. Seo and J. W. Kwon(2013), Effects of Trim on Resistance Performance of a Ship, Journal of the Society of Naval Architects of Korea, Vol. 50, No. 2, pp. 88-94. https://doi.org/10.3744/SNAK.2013.50.2.88
  7. Park, G. Y. and K. H. Cho(2017), A study on the change of EEOI before and after modifying bulbous at the large container ship adopting low speed operation, Journal of the Korean Society of Marine Engineering, Vol. 41, No. 1, pp. 15-20. https://doi.org/10.5916/jkosme.2017.41.1.15
  8. Yang, J. M. and H. C. Kim(2005), Prediction of Propulsive Performance of VLCC at Heeled and Trimmed Conditions, Journal of the Society of Naval Architects of Korea, Vol. 42, No. 2, pp. 307-314. https://doi.org/10.3744/SNAK.2005.42.4.307