• Title/Summary/Keyword: 제거방법

Search Result 8,455, Processing Time 0.042 seconds

Dehazing in HSI Color Space with Color Correction (HSI 색 공간 색상 보정을 이용한 안개 제거 알고리즘)

  • Um, Taeha;Kim, Wonha
    • Journal of Broadcast Engineering
    • /
    • v.18 no.2
    • /
    • pp.140-148
    • /
    • 2013
  • The haze removal algorithm using median dark channel prior is an efficient and fast method with relatively accurate transmission estimation. However, conventional methods may produce color distortion since the method ignores the color mismatch between estimated airlight and actual airlight. In this paper, we propose a color correction with measuring color fidelity in the HSI color space. Experimental results show that the proposed algorithm gives better color correction scheme.

Noise Reduction of X-ray Image by Spatially Adaptive Thresholding (공간 적응적 임계값 설정을 통한 X-ray 영상의 잡음 제거)

  • Yoo Juwoan;Lee Jongmin;Kim Whoi-Yul Yura
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2005.11b
    • /
    • pp.934-936
    • /
    • 2005
  • 본 논문에서는 피라미드 계층간에 나타나는 잡음 신호의 특성을 바탕으로 라플라시안 피라미드를 이용한 X-ray 영상의 잡음 제거 방법을 제안한다. 제안하는 방법은 잡음 제거를 위해 X-ray 영상 신호의 지역적 표준 편차와 신호의 영역적 특징을 이용하였다. 지역적 표준 편차는 영상의 경계선 정도와 비례하는 특징을 가지기 때문에 지역적 표준 편차를 이용하여 경계 정보의 손실을 막았다. 또한 라플라시안 피라미드의 각 계층에 잡음 신호가 좁은 면적을 가지며 분포되는 영역적 특징을 이용하여 평평한 지역에서 잡음 신호의 제거 성능을 높였다. X-ray영상 및 잡음이 첨가된 표준 영상에 대한 실험을 통해 제안된 방법이 경계 정보의 유지와 잡음 제거에서 기존의 방법보다 향상된 성능을 보임을 확인하였다.

  • PDF

A Deadlock Avoidance Method for Concurrent Part Flows in Flexible Manufacturing Cell

  • Chang-Ouk Kim;Kyung-Sik Kang
    • Journal of Korean Society of Industrial and Systems Engineering
    • /
    • v.19 no.39
    • /
    • pp.193-204
    • /
    • 1996
  • 본 연구는 FMC(Flexible Manufacturing Cell)에 있어 상호 간섭이 없는 부품의 흐름을 제어하기 위한 교착제거방법(Deadlock Avoidance Method)에 대한 제안으로서, 이 방법이 주요한 장점은 첫째, FMC의 환경을 쉽게 적용시킬 수 있고 둘째, 공정상의 부품에 대한 dispatching 모듈이 협력하도록 설계되어 있다는 것이다. 교착제거방법은 두 개의 모듈로 구성되어 있는데 이는 순환발견알고리즘(A Cycle Detection Algorithm)과 원료주문 정책으로서, 특이할 만한 사항은 순환발견알고리즘을 채용하더라도 원료주문정책이 잘못될 수 있기 때문에 교착제거방법에 있어서 원료주문정책은 매우 중요하다는 것이다. 이를 위하여 교착전의 N-step 교착을 제거하고, 발견할 수 있는 교착제거방법과 N-step의 사전주무정책을 제시하였다.

  • PDF

ESOPHAGEAL FOREIGN BODY REMOVAL WITH FIBEROPTIC ESOPHAGOSCOPY (식도이물의 굴곡형 내시경을 이용한 치료)

  • 박수헌
    • Korean Journal of Bronchoesophagology
    • /
    • v.2 no.2
    • /
    • pp.182-193
    • /
    • 1996
  • 식도내 이물은 종종 어린이나 식도질환을 가진 환자, 죄수들, 정신박약자 및 정신질환자등의 위험성이 높은 성인에서 흔히 발생한다. 그러나 대부분의 이물은 저절로 위장관을 통과하나 날카롭고 뾰족하며 긴 이물은 위장관의 천공이나 혈관과 누공형성 및 다른 합병증을 초래할 수도 있다. 이물의 섭취는 대개 환자나 다른 목격자에 의하여 복용한 병력으로 진단할 수 있다. 그러나 어린이나 정신박약자는 병력을 얻을 수 없기 때문에 우선 의심하는 것이 중요한 진단방법이 될 수밖에 없다. 연하곤란과 연하통은 식도이물의 통상적인 증상이다. 주변기도의 압박으로 인한 호흡기 증상은 어린이에 흔하며 종종 성인에서도 관찰된다. 식도내 이물을 제거하는데 많이 사용되는 방법은 굴곡형내시경을 사용하여 제거하는 것이다. 이방법은 성인이나 어린이에서 전신마취없이 기존의 진정제 투여방법으로 시술할 수 있다. 이물제거에 사용되는 파지겸자와 올가미는 내시경이물제거술을 가능하게 하였고 굴곡형내시경에 사용되는 overtube는 기존의 강직 형내시경의 장점을 얻을 수 있어 뽀족하거나 날카로운 이물을 제거하는데 사용하게 되었다. 이런 내시경적이물제거 원칙을 잘 지키고 적절한 준비가 된다면 합병증이 거의 없이 98% 정도의 이물을 제거할 수 있다. 내시경을 사용하지 않는 여러 가지 방법은 천공의 위험성이 높고 흡인성폐렴을 유발할 수 있기 때문에 사용하지 않는 것이 낫다. 수술적인 처치는 천공이 되었거나 다른 이물로 인한 합병증이 있는 경우에만 드물게 적용된다.

  • PDF

플라즈마 보조 전자빔 정련을 이용한 Si내의 불순물 제거

  • Kim, Tae-Hak;Choe, Ji-Seong;Ju, Jeong-Hun
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2011.02a
    • /
    • pp.286-286
    • /
    • 2011
  • 현재의 NEDO (New Energy and industrial technology Development Organization) style Si 정련은 두 단계로 구분되어 있다. 고출력 집속 전자빔을 이용한 금속 실리콘의 1차 용융과 대기압 근처의 플라즈마 아크 용해를 이용해서 B, P를 약간의 반응성 가스를 첨가 하여 제거하는 방법이다. 그러나 저가형 실리콘을 생산하려는 취지와 달리 두 가지의 고가 장비가 필요하다. E-beam melting 장치에서도 반응성이 높은 라디칼을 생성할 수 있다면 하나의 장비에서 두 가지의 정련 작업을 진행시킬 수 있다. 본 연구에서는 고진공에서(< 10-4 Torr) 동작하는 E-beam의 성능에 전혀 영향을 주지 않으면서 플라즈마를 용이하게 생성 시킬 수 있는 방법을 개발하고 이를 적용하여 실제 금속 순도 실리콘 내에 존재하는 B, P가 제거되는지 확인하는 것을 연구 내용으로 한다. 본 연구는 MG (Metal Grade) - Si 을 플라즈마 보조 전자빔 정련을 이용하여 정련한 Si 의 불순물 함량의 개선 효과를 조사하는 것이다. MG-Si 의 정련 방법 중에서 고출력 집속 전자빔을 이용하여 휘발성 오염물질을 제거 후, 플라즈마 아크 용해를 이용해서 B 를 제거하는 방법을 접목시켰다. MG-Si 에 DC power 와 전자빔을 집속시켜서 정련을 하면 챔버 내의 잔류 수증기가 플라즈마에 의해 분해되어 O를 생성하고, B와 반응을 하여 BO 형태로 제거가 된다. 방전 전압 700 V 와 전자빔 가속 전압이 4.5 kV, 방출 전류는 11 A, 진공 챔버 내의 압력은 $7.2{\times}10^{-4}$ Torr에서 정련을 진행하여 B를 제거했다.

  • PDF

ICI Cancellation of OFDM System with Multiple Frequency offsets (직교 주파수 분할 다중화 시스템에서 다중 주파수 옵셋에 의한 채널간 간섭 제거기법)

  • Won, Yu-Jun;Seo, Bo-Seok
    • Journal of Broadcast Engineering
    • /
    • v.15 no.2
    • /
    • pp.217-223
    • /
    • 2010
  • In this paper, an interchannel interference (ICI) cancellation method is proposed for multiple frequency offsets in orthogonal frequency division multiplexing (OFDM) systems. When several same signals are received from different transmitters simultaneously, multiple frequency offsets may occur at the receiver because of the frequency difference of the oscillators of the two transmitters and the receiver. This causes degradation of system performance because OFDM systems are very sensitive to the frequency offsets. In this paper, we propose a method to eliminate the effect of the multiple frequency offsets for OFDM systems. The method is accomplished in two steps: compensation of the frequency offset in the time domain and subsequent cancellation of the ICI in the frequency domain. Through computer simulations, we verify the effectiveness of the proposed ICI cancellation method.

Noise Reduction Using Gaussian Mixture Model and Morphological Filter (가우스 혼합모델과 형태학적 필터를 이용한 잡음 제거)

  • Eom Il-Kyu;Kim Yoo-Shin
    • Journal of the Institute of Electronics Engineers of Korea SP
    • /
    • v.41 no.1
    • /
    • pp.29-36
    • /
    • 2004
  • Generally, wavelet coefficients can be classified into two categories: large coefficients with much signal information and small coefficients with little signal component. This statistical characteristic of wavelet coefficient is approximated to Gaussian mixture model and efficiently applied to noise reduction. In this paper, we propose an image denoising method using mixture modeling of wavelet coefficients. Binary mask value is generated by proper threshold which classifies wavelet coefficients into two categories. Information of binary mask value is used to remove image noise. We also develope an enhancement method of mask value using morphological filter, and apply it to image denoising for improvement of the proposed method. Simulation results shows the proposed method have better PSNRs than those of the state of art denoising methods.

Iterative Image Restoration Based on Wavelets for De-Noising and De-Ringing (잡음과 오류제거를 위한 웨이블렛기반 반복적 영상복원)

  • Lee Nam-Yong
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.5 no.4
    • /
    • pp.271-280
    • /
    • 2004
  • This paper presents a new iterative image restoration algorithm with removal of boundary/object-oriented ringing, The proposed method is based on CGM(Conjugate Gradient Method) iterations with inter-wavelet shrinkage. The proposed method provides a fast restoration as much as CGM, while having adaptive do-noising and do-ringing by using wavelet shrinkage. In order to have effective do-noising and do-ringing simultaneously, the proposed method uses a space-dependent shrinkage rule. The improved performance of the proposed method over more traditional iterative image restoration algorithms such as LR(Lucy-Richardson) and CGM in do-noising and do-ringing is shown through numerical experiments.

  • PDF

A New Integrated Suppression Algorithm Based on Combined Power of Acoustic Echo and Background Noise (결합된 음향학적 반향 및 배경 잡음 전력에 기반한 새로운 통합 제거 알고리즘)

  • Park, Yun-Sik;Chang, Joon-Hyuk
    • The Journal of the Acoustical Society of Korea
    • /
    • v.29 no.6
    • /
    • pp.402-409
    • /
    • 2010
  • In this paper, we propose an efficient integrated suppression algorithm based on combined power of acoustic echo and background noise. The proposed method combines the acoustic echo and noise power by the weighting parameter derived from the decision rule based on the estimated echo to noise power ratio. Therefore, in the proposed approach, the acoustic echo and noise signal are able to be reduced through only one suppression filter based on the estimated combined power. The proposed unified structure improves the problems of the residual echo and noise resulted from the conventional unified structure where the noise suppression (NS) operation is placed after the acoustic echo suppression (AES) algorithm or vice versa. The performance of the proposed algorithm is evaluated by the objective test under various environments and yields better results compared with the conventional scheme.

Improving the Performance of Adaptive Feedback Cancellation in Hearing Aids (보청기에서 적응궤환제거의 성능 향상)

  • Kim, Dae-Kyung;Hur, Jong;Park, Jang-Sik;Son, Kyung-Sik
    • The Journal of the Acoustical Society of Korea
    • /
    • v.18 no.4
    • /
    • pp.38-46
    • /
    • 1999
  • In this paper, two methods were proposed to improve the performance of adaptive feedback cancellation in hearing aids. One is “Orthogonality principle acoustic feedback cancellation method(Orthogonality principle method)” to track optimal solution with monitoring the instantaneous gradient, the other is a method using the CLMS algorithm(CLMS method). In many simulation conditions, adaptive feedback cancellation method proposed in this paper was much better than Greenberg method by Sum-method LMS algorithm which is known the most excellent method by now in case of system mismatch, SNR and segmental SMR. Also. Orthogonality principle method is as good as CLMS method in terms of adaptive feedback cancellation in many simulation conditions.

  • PDF