• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5385-5391
• /
• 2013

As on-line purchases is activated, customers' demand increases for the realistic and accurate digital information of a product design. In this paper, we propose a practical method that can generate a realistic 3D model of a real product using a 3D geometry obtained by a 3D scanner and its photographic images. In order to register images to the 3D geometry, the camera focal length, the CCD scanning aspect ratio and the transformation matrix between the camera coordinate and the 3D object coordinate must be determined. To perform this 2D-3D registration with consideration of computational complexity, a three-step method is applied, which consists of camera calibration, determination of a temporary optimum translation vector (TOTV) and nonlinear optimization for three rotational angles. A case study for a metallic coated industrial part, of which the colour appearance is hardly obtained by a 3D colour scanner has performed to demonstrate the effectiveness of the proposed method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.2
• /
• pp.171-177
• /
• 2012

In this paper, we proposed a algorithm and an operation boundary for fault detection of a onboard GNSS receiver. After aircraft exchange corrections computed by an aircraft receiver, a faulty aircraft receiver is detected by checking consistency of correction. For this purpose, PRC residual is used as the test statistic for fault detection of the onboard GNSS receiver. And operation boundaries are set by using DGPS position error increase with respect to the distance from a reference station. If the fault detection is performed by using aircraft only in operation boundary, the more accurate fault detection can be possible.

• Journal of the Korean Society of Groundwater Environment
• /
• v.5 no.4
• /
• pp.210-214
• /
• 1998

In general the concentration of uranium in natural water such as fresh water and sea water is in the range of 0.01∼5 ppb, therefore trace analytical technique is required. The aim of present work is to compare a direct and preconcentration methods by evaporation and to investigate rapid and accurate trace analysis of uranium in groundwater using Instrumental Neutron Activation Analysis (INAA) which are sensitive and nondestructive method. Identification of analytical procedure was carried out using uranium standard solution of the range of 0.5∼100 ppb. In the given concentration, the deviation of calibration curve was less than 2%, and the standard deviation of measured values at each concentration was the range of 2∼12%. The difference of U content with sampling time for the same sample site was about 10.3%. Using this established method, the concentrations of uranium in samples collected at the 17 spring of Choongchung areas were found to be in the range of 1∼80 ppb.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.6_1
• /
• pp.511-518
• /
• 2012

It is well-known that non-metric digital cameras have to be calibrated for the close-range photogrammetry. But, the self-calibration is still not an easy task because it requires rather a large calibration site of accurate control points, multiple image acquisitions in different positions, and accurate image point measurements that are quite labor-intensive and time-consuming. Based on the premise, this study carried out check point accuracy analysis from self-calibration of different control point designs and photo combinations. The test results showed that the calibration using three photos covering three-dimensional control points produced high accuracy, but control points on a plane could attain the comparable accuracy with four photos including a 90-degree rotated photo. We then compared the target accuracy of on-site self-calibration using flat control points to that of laboratory-self calibration and observed comparable results.

• Journal of Engineering Education Research
• /
• v.3 no.2
• /
• pp.3-13
• /
• 2000

The paper has analyzed and summarized about the theoretical problem occurred in the CAQC, and has developed the learning model focused on the histogram as a case study. The range of study is to systematize the basic method of histogram generally used, and to make step by step procedures under the interactive relation with the improvement of the theory that must be added in case of the calculation by the aided of MS-Excel software. A histogram is the theory to understand the population distribution from which samples are extracted, so alternative methods are presented to estimate the population shape through an experiment and a practice. In order to enlarge the application area of the histogram in the factory, the theory of normal test, the criteria of process capability index and the probability calculation of PPM are added to the histogram. The learning model of CAQC education is proposed that is consistent with the target of histogram to control and search the cause of item defectives fast and correctly.

• Applied Biological Chemistry
• /
• v.38 no.5
• /
• pp.440-446
• /
• 1995

In order to select the proper formulation of newly developed herbicide Cyhalofop-butyl{n-butyl-(R)-2-[4-(2-fluro-4-cyanophenoxy)phenoxy]propionte} to Echino-chloacrus-galli(L)P. Beaw. several formulations were made and tested by biological assay. Weed control of wettable powder formulated with two adjuvants on E. crus-galli showed higher effect as compared with the formulation made without adjuvants. Higher concentration of adjuvants resulted in higher absorption and higher weed control on E. crus-galli. However, adhesional force of wettable powder applied to leaf surface was not positively correlated to the amount of herbicide absorption. The weeding effect and amount of herbicide absorbed on E. crus-galli were higher by emulsifiable concentrateformulations with different HLB and non ionic surfactants as compared with wettable powder formulations. The higher adhesional force and higher absorption of herbicide on E. crus-galli were obtained from microemulsion than the others. Granulization of the herbicide with appropriate adjuvants in a form of resurfacing on the submerged water gave rise to a good weeding effect and believed to be a possible promising formulation.

• The Journal of the Korea Contents Association
• /
• v.16 no.12
• /
• pp.735-748
• /
• 2016

Since the number of student is regarded as the fundamental basis to calculate the future allocation of employed teachers, it needs to be systematically estimated based on statistical data. In order to achieve this purpose, the number of high school students is projected following the assumption that the teacher-student ratio of Korea should be adjusted to the level of OECD to improve the quality of education. Hence, this paper introduced the projection methods by time series model. To predict the number of high school students and error estimation, various models were adopted.

• The Korean Journal of Financial Management
• /
• v.11 no.1
• /
• pp.233-262
• /
• 1994

본 연구는 주식시장(株式市場)의 이상현상(異狀現象)중의 하나인 요일효과(曜日效果)(day of the week effect)를 전통적인 회귀분석(回歸分析)이 아닌 ARCH 또는 GARCH 모형을 사용하여 조건부(條件附) 평균수익률(기대수익률)(平均收益率(期待收益率)) 뿐만아니라 조건부(條件附) 분산(分散)에도 나타나는지에 대하여 분석하였으며, 규모별(規模別)에 따라 요일효과(曜日效果)에 어떠한 차이가 나타나는지를 분석하였다. 본 연구의 추정결과를 요약하면, 조건부(條件附) 평균수익률(기대수익률)(平均收益率(期待收益率)) 및 조건부(條件附) 분산(分散) 모두에 있어 요일효과(曜日效果)가 뚜렷하게 존재하는 것으로 나타났다. 즉, 조건부(條件附) 평균수익률(平均收益率)에 대해서는 월요일(月曜日)은 부(負)의 효과, 토요일(土曜日)은 정(正)의 효과가 나타났으며, 조건부(條件附) 분산(分散)에 대해서는 월요일(月曜日)은 정(正)의 효과가, 토요일(土曜日)은 부(負)의 효과가 발견되었다. 그러나 한국(韓國)의 주식시장의 본격적인 성장기이면서 주식가격의 등락이 심했던 $86\sim92$년(年)간의 표본기간 동안에는 조건부(條件附) 분산(分散)에 대한 요일효과(曜日效果)는 존재하였으나, 조건부(條件附) 평균수익률(平均收益率)에 대한 요일효과(曜日效果)는 존재하지 않는 것으로 나타났다. 그리고 소형지수(小型指數)가 중(中) 대형지수(大型指數)와는 다른 주가행태를 보이는 것으로 나타났으며, 다음과 같은 몇 가지의 규모별(規模別) 차이(差異)를 보였다. 첫째, 조건부(條件附) 평균수익률(平均收益率)에 대한 분석에서 중(中) 대형지수수익률(大型指數收益率)을 사용하였을 경우에는 요일효과(曜日效果)가 나타난 반면에, 소형(小型) 지수수익률(指數收益率)의 경우에는 화요효과(火曜效果)가 존재하는 것으로 나타났다. 둘째, 조건부(條件附) 분산(分散)에 대한 분석에서 정(正)의 공휴일효과(公休日效果)가 다른 규모별 지수수익률(指數收益率)의 경우에는 나타나지 많았지만 소형(小型) 지수수익률(指數收益率)의 경우에는 존재하는 것으로 나타났다. 세째, 소형(小型) 지수수익률(指數收益率)의 경우 모형 추정후의 정규잔차(定規殘差)(normalized residuals) 및 정규자승잔차(定規自乘殘差)(normalized squared residuals)에 대한 시계열상관(時系列相關) 검정결과 모형의 부적합성(不適合性)이 나타났다. 본 연구는 기존의 기대수익률(期待收益率) 위주의 요일효과(曜日效果) 분석에서 주식수익률(株式收益率)의 분산(分散) 즉, 변동성(變動性)에 촛점을 두어 분석하였으며, 이는 투자자의 정확한 위험측정(危險測定)수단의 제공이라는 면에서 의의(意義)가 있을 것으로 생각된다.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.1
• /
• pp.89-98
• /
• 2012

In this paper, the ratio of parameters in two independent Maxwell distributions is parameter of interest. We proposed test statistics, which converge to standard normal distribution, based on likelihood function. The exact distribution for testing the ratio is hard to obtain. We proposed the signed log-likelihood ratio statistic and the modified signed log-likelihood ratio statistic for testing the ratio. Through simulation, we show that the modified signed log-likelihood ratio statistic converges faster than signed log-likelihood ratio statistic to standard normal distribution. We compare two statistics in terms of type I error and power. We give an example using real data.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.4
• /
• pp.959-967
• /
• 2016

Distributional assumptions on equity returns play a key role in valuation theories for derivative securities. Elberlein and Keller (1995) investigated the distributional form of compound returns and found that some of standard assumptions can not be justified. Instead, Generalized Hyperbolic (GH) distribution fit the empirical returns with high accuracy. Hu and Kercheval (2007) also show that the normal distribution leads to VaR (Value at Risk) estimate that significantly underestimate the realized empirical values, while the GH distributions do not. We consider saddlepoint approximations to estimate the VaR and the ES (Expected Shortfall) which frequently encountered in finance and insurance as measures of risk management. We supposed GH distributions instead of normal ones, as underlying distribution of linear portfolios. Simulation results show the saddlepoint approximations are very accurate than normal ones.