• Title/Summary/Keyword: 정현파

Search Result 355, Processing Time 0.028 seconds

Development of the Sinusoidal Rotatory Chair System for Evaluation of the Vestibular Function (전정기능 평가를 위한 청현파 회전자극시스템의 개발)

  • 임승관;정호춘;김규겸;진달복;김민선
    • Science of Emotion and Sensibility
    • /
    • v.1 no.1
    • /
    • pp.181-197
    • /
    • 1998
  • 전정기관은 자세의 조절에 관여하지만, 전정기관의 손상은 현기증 및 자세부조화를 초래한다. 본 연구에서는 현기증의 원인을 규명할 목적으로 전정기능을 평가할 수 있는 정현파 회전자극시스템을 개발하고자 하였다. 정현파 회전자극시스템은 회전의자와 구동 및 분석프로그램으로 구성하였으며, DC 서보모터로 구동되는 회전의자는 0.01-0.64 Hz의 주파수범위에서 60 ˚/sec의 초고속도로 정현파 회전한다. 현기증 환자에서 전정기능을 평가하기 위하여 전정안구반사, 시운동성 전정안구반사 및 시각의 억제에 의한 전정안구반사를 측정하여 안구운동의 이득, 위상, 대칭성 등을 산출하도록 정현파 회전자극시스템을 개발하였으며, 정상 성인에서 시험한 결과 신뢰성있는 성적을 얻었다. 따라서 본 시스템은 현기증 환자의 진단 및 치료정도를 판정할 수 있으르로 임상적으로 널리 사용할 수 있을 것으로 사료된다.

  • PDF

AbS/OLA Sinusoidal Modeling of Speech Signal Using Wavelet Transform (웨이블릿 변환을 이용한 음성신호의 AbS/OLA 정현파 모델링)

  • Kim Ki-Hong;Hong Jin-Keun;Jung Yong-Ik;Lee Sang-Yi
    • Proceedings of the KAIS Fall Conference
    • /
    • 2004.11a
    • /
    • pp.114-117
    • /
    • 2004
  • 본 논문에서는 합성에 의한 분석(Analysis-by-Synthesis) 및 가산중첩(Overlap-Add) 방식을 채택하고 있는 음성신호의 AbS/OLA 정현파 모델에 웨이블릿 변환을 적용한 새로운 모델을 제안하였다. 즉, 기존의 모델에 웨이블릿 변환을 적용하여 입력신호를 몇 개의 부대역 신호로 나눈 다음 각각 다른 길이의 분석 윈도우를 적용한다. 이는 기존 모델의 정현파 파라미터 추출 시 고정된 길이의 분석 윈도우를 이용하는 단점을 극복하여 좀 더 정확한 파라미터 추출을 가능하게 한다. 시험결과 제안된 정현파 모델이 기존 모델에 비해 합성음의 스펙트럼 및 위상 특성, 음질 등에서 성능이 개선됨을 확인할 수 있었다.

  • PDF

Flow and Heat Transfer Characteristics of Heat Exchanger Tube Bank with the Sinusoidal Inlet Velocity (정현파 입구 속도 변동에 따른 열교환기 관군의 유동 및 열전달 특성)

  • Ha, Ji Soo
    • Journal of the Korean Institute of Gas
    • /
    • v.25 no.1
    • /
    • pp.14-19
    • /
    • 2021
  • The change of the vorticity and the temperature distribution in heat exchanger tube bank were analyzed for the flows with the constant inlet velocity and the sinusoidal inlet velocity. The flow frequency characteristics were examined by analyzing power spectral density of lift and drag at a typical circular tube in the tube bank. Karman vortex street could be seen at the upstream region of tube bank for the case of constant inlet velocity. It could be seen that the Karman vortex street was affected by the change of inlet velocity near the circular tubes for the case with the sinusoidal inlet velocity. It was observed that the unsteady temperature distributions for both inlet velocity conditions had almost the same motion as the flow vorticity behavior. The flow frequency for the case with the constant inlet velocity is 37.25Hz, and that with the sinusoidal inlet velocity, the flow frequency is 18.63Hz, which is equal to the sinusoidal inlet velocity. The mean surface Nusselt number(Nu) for overall heat exchanger tube bank was 1051 for the case with the constant inlet velocity and 1117 for the case with the sinusoidal inlet velocity. From the result of heat transfer analysis, it could be seen that Nu with the sinusoidal inlet velocity showed 6.3% increase than that with the constant inlet velocity.

The Transition Control Technique between Sinusoidal-Wave and Square-Wave Driving Method in Inverter for PMSM (영구자석형 동기전동기용 인버터에서 정현파-구형파 운전 방식 사이의 전환 방법)

  • Lee, Seung-Yong;Yoon, Duck-Yong
    • Proceedings of the KIPE Conference
    • /
    • 2016.07a
    • /
    • pp.113-114
    • /
    • 2016
  • 영구자석형 동기전동기를 구동하는 인버터에서는 기본적으로 정현파 운전 방식을 사용하지만 최근에는 구형파 운전 방식도 종종 사용되고 있다. 정현파 운전 방식은 구형파 운전 방식에 비해 토크 리플이 작고 기동 성능이 우수하며, 약자속 제어를 이용하여 정격 속도 이상의 고속 운전이 가능하다. 이에 비해 구형파 운전 방식은 제어 알고리즘이 간단하고 스위칭 손실이 적은 장점이 있지만, 토크 리플이 크고 정격 속도 이하의 영역에서만 운전이 가능하다는 단점이 있다. 최근에 인버터의 운전 중에 각각의 장점이 있는 이들 2가지 운전 방식을 서로 전환하는 방법으로 가전제품의 압축기와 같은 연속 부하에 적용하기 위한 연구가 진행되었다. 저속 구간에서는 스위칭 손실을 줄이기 위하여 구형파 운전 방식을 주로 사용하고, 고속 구간에서는 안정적인 제어 성능을 위하여 정현파 운전 방식을 사용한다. 또한, 이 2가지 운전 방식의 전환 구간에서의 발생되는 과도 상태를 짧게 줄이기 위하여 속도 및 전류 제어기의 제어 변수에 대한 초기화 방법이 제시되었다. 본 논문에서는 구형파 운전 구간의 속도 제어기에 비례 적분 전류 제어기를 추가하여 전류 리플을 감소시키고, 전환 구간에서의 속도 및 전류 제어기의 제어 변수에 대한 초기화 방법을 제시하였다.

  • PDF

Analysis of the Control Model of Third Harmonics Injected PWM Inverter in Over Modulation Mode (과변조 영역에서의 제3고조파 주입형 PWM 인버터 제어 모델 분석)

  • 김영렬
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.14 no.5
    • /
    • pp.66-73
    • /
    • 2000
  • A new modified command voltage of the third harmonics injected PWM inverter is proposed to control the inverter in overmodulation mode. The third harmonics injected PWM has a extended linear region compared with the sine PWM. But it still has a maximum voltage about 90% compared with the six step inverter. By analyzing the relationship between the modulation index and the peak of the fundamental component of the modified reference voltage, we can settle the problem in over modulation mode without iteration. Then we can increase the maximum fundamental component of the third harmonics injected PWM inverter comparative to six-step inverter continuously in over modulation mode. The simulation results of the inverter-induction motor system shows the validity of this method.

  • PDF

A Study on Precision Position Measurement Method for Analog Quadrature Encoder (정현파 엔코더를 이용한 정밀위치 측정방법에 관한 연구)

  • Kim Myong-Hwan;Kim Jang-Mok;Kim Cheul-U
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.9 no.5
    • /
    • pp.485-490
    • /
    • 2004
  • This paper presents a new interpolation algorithm for measuring high resolution position information which is prepared to a nino servo control motor using analog quadrature encoder. In the past, there are large capacity of memory(ROM or RAM) and two high price and resolution A/D(Analog-to-Digital Converter) for sensing two quadrature signals from a analog sinusoidal encoder interpolation. But high resolution of position from sinusoidal encoder can be obtained by using only small capacity of memory, one A/D converter and comparator. Experimental results show that the proposed algorithm is useful for measuring high resolution position.

Sinusoidal Modeling of Polyphonic Audio Signals Using Dynamic Segmentation Method (동적 세그멘테이션을 이용한 폴리포닉 오디오 신호의 정현파 모델링)

  • 장호근;박주성
    • The Journal of the Acoustical Society of Korea
    • /
    • v.19 no.4
    • /
    • pp.58-68
    • /
    • 2000
  • This paper proposes a sinusoidal modeling of polyphonic audio signals. Sinusoidal modeling which has been applied well to speech and monophonic signals cannot be applied directly to polyphonic signals because a window size for sinusoidal analysis cannot be determined over the entire signal. In addition, for high quality synthesized signal transient parts like attacks should be preserved which determines timbre of musical instrument. In this paper, a multiresolution filter bank is designed which splits the input signal into six octave-spaced subbands without aliasing and sinusoidal modeling is applied to each subband signal. To alleviate smearing of transients in sinusoidal modeling a dynamic segmentation method is applied to subbands which determines the analysis-synthesis frame size adaptively to fit time-frequency characteristics of the subband signal. The improved dynamic segmentation is proposed which shows better performance about transients and reduced computation. For various polyphonic audio signals the result of simulation shows the suggested sinusoidal modeling can model polyphonic audio signals without loss of perceptual quality.

  • PDF

Formant Synthesis of Haegeum Sounds Using Cepstral Envelope (캡스트럼 포락선을 이용한 해금 소리의 포만트 합성)

  • Hong, Yeon-Woo;Cho, Sang-Jin;Kim, Jong-Myon;Chong, Ui-Pil
    • The Journal of the Acoustical Society of Korea
    • /
    • v.28 no.6
    • /
    • pp.526-533
    • /
    • 2009
  • This paper proposes a formant synthesis method of Haegeum sounds using cepstral envelope for spectral modeling. Spectral modeling synthesis (SMS) is a technique that models time-varying spectra as a combination of sinusoids (the "deterministic" part), and a time-varying filtered noise component (the "stochastic" part). SMS is appropriate for synthesizing sounds of string and wind instruments whose harmonics are evenly distributed over whole frequency band. Formants extracted from cepstral envelope are parameterized for synthesis of sinusoids. A resonator by Impulse Invariant Transform (IIT) is applied to synthesize sinusoids and the results are bandpass filtered to adjust magnitude. The noise is calculated by first generating the sinusoids with formant synthesis, subtracting them from the original sound, and then removing some harmonics remained. Linear interpolation is used to model noise. The synthesized sounds are made by summing sinusoids, which are shown to be similar to the original Haegeum sounds.

A Study on the Brushless DC Motor Using a Sine Wave Driving System and a Position Sensor (정현파 구동 시스템과 위치 센서를 이용한 BLDC모터에 대한 연구)

  • Mun, Sung-Ju;Kim, Young-Hyun;Lee, Dae-Dong;Lee, Jung-Ho
    • Proceedings of the KIEE Conference
    • /
    • 2008.07a
    • /
    • pp.790-791
    • /
    • 2008
  • 이 연구는 이동 매쉬기법이 고려된 유한요소 해석법을 이용한 영구자석 Brushless 직류모터(BLDCM)의 동적 특성해석을 다루었다. 이 논문의 초점은 BLDCM의 적합한 속도 제어를 위한 정현파 구동시스템의 적합성을 보여주고 있다. 각각의 구형파 시스템과 BLDC 구동시스템의 제안된 속도리플과 전류응답을 비교하였다. 실험결과들에 의해 속도제어 시스템은 해석되어졌고, 정현파 구동시스템의 유효성은 검증되었다.

  • PDF

A robust watermarking method using the correlation of the sinusoidal pattern (정현파 패턴의 상관관계를 이용한 강인한 워터마킹)

  • Kim, Sang-Bum;Won, Chee-Sun
    • Journal of the Institute of Electronics Engineers of Korea SP
    • /
    • v.45 no.1
    • /
    • pp.22-28
    • /
    • 2008
  • In this paper, we propose a DCT coefficient domain watermarking scheme, which makes use of the sinusoidal patterns created by the watermark embedding. The embedded watermark can be detected in the spatial domain by computing the correlation. Also, the proposed algorithm can detect the spatial synchronization without additional sync bit embedding. Experimental results show that the proposed algorithm is robust to various StirMark attacks.