• Journal of the Korean Geotechnical Society
• /
• v.37 no.3
• /
• pp.19-30
• /
• 2021

The presence of the hydrate-bearing sediments in Ulleung Basin of South Korea has been confirmed from previous studies. Researches on gas production methods from the hydrate-bearing sediments have been conducted worldwide. As production mechanism is a complex phenomenon in which thermal, hydraulic, and mechanical phenomena occur simultaneously, it is difficult to accurately conduct the productivity and stability analysis of hydrate bearing sediments through lab-scale experiments. Thus, the importance of numerical analysis in evaluating gas productivity and stability of hydrate-bearing sediments has been emphasized. In this study, the numerical parametric analysis was conducted to investigate the effects of the bottom hole pressure and the depressurization rate on the gas productivity and stability of hydrate-bearing sediments during the depressurization method. The numerical analysis results confirmed that as the bottom hole pressure decreases, the productivity increases and the stability of sediments deteriorates. Meanwhile, it was shown that the depressurization rate did not largely affect the productivity and stability of the hydrate-bearing sediments. In addition, sensitivity analysis for gas productivity and stability of the sediments were conducted according to the depressurization rate in order to establish a production strategy that prevents sand production during gas production. As a result of the analysis, it was confirmed that controlling the depressurization rate from a low value to a high value is effective in securing the stability. Moreover, during gas production, the subsidence of sediments occurred near the production well, and ground heave occurred at the bottom of the production well due to the pressure gradient. From these results, it was concluded that both the productivity and stability analyses should be conducted in order to determine the bottom hole pressure when producing gas using the depressurization method. Additionally, the stress analysis of the production well, which is induced by the vertical displacements of sediments, should be evaluated.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.2
• /
• pp.130-138
• /
• 2011

This study was carried out to investigate growth characteristics and propagation methods of Clerodendron trichotomum for landscape uses. The results are obtained as follows: In the first place, Korean native C. trichotomum was printed in the "Enumeration of plants in Chosun" in 1937 by Tae Hyun Chung. C. trichotomum is a shrub with round shape. This is noted for its late summer flowers, showy fruit and malodorous foliage. White flowers in long-peduncled cymes bloom in the upper leaf axils from late summer into fall. Flowers are followed by small bright blue fruits, each subtended by a fleshy red calyx. C. trichotomum showed high seed germination rate and greater shoot length in plug box than in normal seeding bed. The rooting rate of C. trichotomum according to cutting date was highest on July 7. The optimum date for cutting was on July 7~10 when the shoots were more hardened. Soil acidity ranged from pH 4.58 to 5.52. The most effective method for rooting of C. trichotomum was treatment with 1,000 ppm IBA on July 7 cuttings, which showed rooting rate of over 90%. Korean native C. trichotomum was successfully propagated through soft cutting and seed.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.40 no.4
• /
• pp.227-235
• /
• 2020

This study was conducted to investigate the growth characteristics of the shoot and roots and to analyse the morphological characteristics of roots of waterlogging resistant and susceptible maize inbred lines. Six maize inbred lines were treated with waterlogging for 10 days at V3, and the degree of leaf senescence was evaluated for waterlogging resistance. As a result of waterlogging resistance evaluation, KS85 was the most damaged inbred line with 3.33 senescence leaves and 5.54 degree, and KS141 was the least damaged inbred line with 1.33 senescence leaves and 3 degree. At 20 days after treatment, the effect of waterlogging stress on the shoot dry matter accumulation of KS85 and KS141 were decreased by 86.1% and 77.0%, respectively, compared to the control. Similarly, root dry matter accumulation of KS85 and KS141 were decreased by 77.6% and 65.0%. As a result of SEM photographs of the nodal roots of the two maize inbred lines, the thickness of cortex of KS141 was thicker than that of KS85, and the distortion of the cortex was observed in KS85 at 20 days after waterlogging. It was concluded that the thickness of cortex was related to maize waterlogging resistance.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.6
• /
• pp.80-92
• /
• 2021

Mount Tai, with an elevation of 1,532 meters, has a reputation as 'The Most Revered of the Five Sacred Mountains(五嶽獨尊)', despite not being the highest mountain in China. The literati of the past dynasties created a multitude of works based on the landscape of Mount Tai. Traditional literature is a part of national culture that directly reflects the national characteristics and styles, and is an important part of humanities, which can be linked to landscapes. The purpose of this study is to investigate the landscape elements and characteristics of Mount Tai by analyzing the landscape types and elements and the Kernel Density, Mean Center and Standard Deviational Ellipse of the landscape elements appearing in the representative poems of traditional literature. The research results of this study are summarized as follows. First, Mount Tai is a scenic spot dominated by human activities, different from the natural landscape of prior research related to scenic spots. Second, among the landscape elements of Mount Tai, the importance of "sunrise", "cyan", "towering" and "majestic", "Divine Dragon" is confirmed, symbolizing the hope, brightness, vitality, national stability and prosperity represented by Mount Tai, which can explain the leadership position of Mount Tai. Third, it can be found from the poems about Mount Tai that various landscape elements were embodied in belief (the behavior of gods or emperors) in the Pre-Qin, Sui and Tang dynasties, while in modern times, landscape elements are shown by action (climbing and looking far into distance), so it can be said that the landscape elements have changed from belief landscapes to experience landscapes. Fourth, the spatial distribution of landscape elements in the past dynasties was widely distributed in the Daiding(岱頂). Approaching the modern times, the mean center moved from south outside of Mount Tai to the summit of Mount Tai, and the spatial distribution changed from a widely scattered distribution to narrow linear distribution centered on Mount Tai. The present study is of great significance to provide key factors or spaces for future landscape protection and restoration of Mount Tai.

• The Journal of Korean Society for Radiation Therapy
• /
• v.33
• /
• pp.9-14
• /
• 2021

This study examined dose change depending on the reposition error of the junction at the time of treatment with multi-isocenter volumetric modulated arc therapy. This study selected a random treatment region in the Arccheck Phantom and established the treatment plan for multi-isocenter volumetric modulated arc therapy. Then, after setting the error of the junction at 0 ~ 4 mm in the X (left), Y (upper), and Z (inner and outer) directions, the area was irradiated using a linear accelerator; the point doses and gamma indexes obtained through the Phantom were subsequently analyzed. It was found that when errors of 2 and 4 mm took place in the X and Y directions, the gamma pass rates (point doses) were 99.3% (2.085) and 98% (2.079 Gy) in the former direction and 98.5% (2.088) and 95.5% (2.093 Gy) in the latter direction, respectively. In addition, when errors of 1, 2, and 4 mm occurred in the inner and outer parts of the Z direction, the gamma pass rates (point doses) were found to be 94.8% (2.131), 82.6% (2.164), and 72.8% (2.22 Gy) in the former part and 93.4% (2.069), 90.6% (2.047), and 79.7% (1.962 Gy) in the latter part, respectively. In the X and Y directions, errors up to 4 mm were tolerable; however, in the Z direction, error values exceeding 1 mm were beyond the tolerance level. This suggests that for high and low dose areas, errors in the direction same as the progress direction in the treatment region have a more sensitive dose distribution. If the guidelines for set-up errors are established at the institutional level through continuous research in the future, it will be possible to provide good quality treatment using junctions.

• Journal of the Korean Electrochemical Society
• /
• v.26 no.1
• /
• pp.1-10
• /
• 2023

The cathode, which is one of the four major components of a lithium secondary battery, is an important component responsible for the energy density of the battery. The mixing process of active material, conductive material, and polymer binder is very essential in the commonly used wet manufacturing process of the cathode. However, in the case of mixing conditions of the cathode, since there is no systematic method, in most cases, differences in performance occur depending on the manufacturer. Therefore, LiMn₂O₄ (LMO) cathodes were prepared using a commonly used THINKY mixer and homogenizer to optimize the mixing method in the cathode slurry preparation step, and their characteristics were compared. Each mixing condition was performed at 2000 RPM and 7 min, and to determine only the difference in the mixing method during the manufacture of the cathode other experiment conditions (mixing time, material input order, etc.) were kept constant. Among the manufactured THINKY mixer LMO (TLMO) and homogenizer LMO (HLMO), HLMO has more uniform particle dispersion than TLMO, and thus shows higher adhesive strength. Also, the result of the electrochemical evaluation reveals that HLMO cathode showed improved performance with a more stable life cycle compared to TLMO. The initial discharge capacity retention rate of HLMO at 69 cycles was 88%, which is about 4.4 times higher than that of TLMO, and in the case of rate capability, HLMO exhibited a better capacity retention even at high C-rates of 10, 15, and 20 C and the capacity recovery at 1 C was higher than that of TLMO. It's postulated that the use of a homogenizer improves the characteristics of the slurry containing the active material, the conductive material, and the polymer binder creating an electrically conductive network formed by uniformly dispersing the conductive material suppressing its strong electrostatic properties thus avoiding aggregation. As a result, surface contact between the active material and the conductive material increases, electrons move more smoothly, changes in lattice volume during charging and discharging are more reversible and contact resistance between the active material and the conductive material is suppressed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.4
• /
• pp.265-273
• /
• 2022

Waxy corn (Zea mays L.), which contains homozygous mutant alleles for the waxy1 (wx1) gene, is widely consumed as a snack food in Asia. This study evaluated sixteen agronomic characteristics of inbred Korean waxy corn lines to aid development of high-quality waxy corn cultivars. The plant materials studied were 177 inbred waxy corn lines developed by the National Institute of Crop Science, Rural Development Administration, Republic of Korea. For the tested lines, days to tasseling and silking averaged 77.69±2.22 days (with a range of 56-97 days), and 81.12±7.56 days (66-99 days), respectively. Plant length ranged from 88 to 237 cm (averaged 164.88±22.67 cm), ear length averaged 11.75±2.52 cm (5.0-18.5 cm), and ear width averaged 2.94±0.68 cm (1.4-4.5 cm). The number of rows on each ear of corn averaged 12.22±2.22 (7-32 rows) and the kernel number averaged 24.30±4.22 (9-37 kernels) per row. The crude protein content was 12.05±1.53% (8.90-21.80%) and total starch content was 69.27±5.74% (49.5-83.9%). Principal component analysis revealed that ear width, grain length, ear length, days to tasseling, days to silking, percentage of ear setting height, and total starch are features that allow distinction between the 177 waxy inbred corn lines. Hierarchical cluster analysis identified twelve waxy inbred lines that produce tall plants and have a short silking period. These lines may improve yield among quickly growing corn varieties.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.4
• /
• pp.249-257
• /
• 2022

This study was conducted to comparison analysis growth characteristics, yield and forage quality of 18silage corn varieties grown in paddy and upland fields. In this condition, days to silking of Sinhwangok was the shortest with 78 days and Kangdaok the longest with 92 days. Moreover it was confirmed that the difference of days to silking at this condition greatly occurred in the late species than in the precocious species. The height and ear height ratio of corn grown in paddy decreased by 5~10% and increase by 10~15% compared to upland, respectively. It was confirmed that the ear ratio of corn which enhances the forage quality was highest in Sinhwangok at paddy and upland and most of the varieties decreased by 10~30% at paddy rather than upland. The length of ear was also reduced by 10~25%. In fresh yield, Dacheongok showed the highest yield at 65,750 kg/ha in upland and 38,830 kg/ha in paddy. Similar to the fresh yield, dry and TDN yield in Dacheongok also showed the highest yield at 36,910 kg/ha, 18,040 kg/ha in upland and 21,670 kg/ha, 14,390 kg/ha in paddy, respectively. As a result of analyzing crude protein and starch from seeds to evaluate the feed value of corn for silage, there was no difference between cultivars grown in this condition. In addition, as a result of analyzing the contents of ADF and NDF using leaves, stems and seeds, the contents of leaves and stems were lower in P3394 and P1543 at the upland and lower in Singwangok and Daanok when cultivated at paddy. Moreover ADF and NDF contents were decreased in some varieties in paddy rather than upland. Therefore, there is no significant difference in the feed value of corn varieties grown in this condition, it is possible to cultivate corn in paddy if normal growth is achieved through drainage management.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.1
• /
• pp.89-103
• /
• 2023

The purpose of this study was to measure bone age using an artificial intelligence program based on the Greulich-Pyle (GP) method to find out the bone age corresponding to each stage of cervical vertebral maturation (CVM) and the middle phalanx of the third finger (MP3). This study was conducted on 3,118 patients who visited pediatric dentistry at Kyung Hee University Dental Hospital and Pusan National University Dental Hospital from 2013 to 2021. The CVM stage was divided into 5 stages according to the classification by Baccetti, and the MP3 stage was divided into 5 stages according to the methods of Hägg and Taranger. Based on the GP method, bone age was evaluated using an artificial intelligence program. The pubertal growth spurt in the CVM stage was CVM II and III. The mean bone age in CVM II was 11.00 ± 1.81 years for males and 10.00 ± 1.49 years for females, and in CVM III, 13.00 ± 1.46 years for males and 12.00 ± 1.44 years for females (p < 0.0001). The pubertal growth spurt in the MP3 stage was MP3 - G stage. The bone age at the MP3 - G stage was 13.14 ± 1.07 years for males and 11.40 ± 1.09 years for females (p < 0.0001). Bone age evaluation using artificial intelligence is worth using in clinical practice, and it is expected that a faster and more accurate diagnosis will be possible.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.3
• /
• pp.318-333
• /
• 2023

The purpose of this study is to analyze changes in dental trauma in children under the age of 12 during the period of Coronavirus Disease 2019 (COVID-19). March 2020, when COVID-19 was officially declared a pandemic by the World Health Organization, was set as the starting point for COVID-19. From March 2018 to February 2020, subjects in the pre-COVID-19 period were classified as the Pre-COVID-19 group, and from March 2020 to March 2022, subjects in the post-COVID-19 period were classified as the COVID-19 group. Information related to trauma was collected through electronic medical records. The number of trauma patients before and after the outbreak of COVID-19 decreased significantly. During the COVID-19 period, there was no significant difference in the male-female ratio or the distribution order of age groups. In the COVID-19 group of permanent teeth, the ratio of trauma caused by personal mobility was higher than trauma caused by sports. In the COVID-19 group of permanent teeth, the ratio of crown fracture with pulp involvement was significantly higher than the ratio of crown fracture without pulp involvement. Changes in trauma patterns caused by COVID-19 were observed more clearly in school-aged children than in preschool children. In a pandemic situation such as COVID-19, it is expected to be used as a good educational basis for knowing that frequent diagnoses can change due to changes in the environment.