• Journal of Cadastre & Land InformatiX
• /
• v.47 no.1
• /
• pp.95-110
• /
• 2017

The network RTK surveying has been widely used in the field of cadastral surveys in recent years, and its use is gradually expanding. As a result of the implementation of GPS static surveys by civilian companies in accordance with the progress of the cadastral surveys and gradual civilian transfer plans and cadastral surveys, there has been an increase in the number of civilian companies performing surveys. In this paper, we describe the process of applying the results of analysis of conformity using the network RTK site calibration function on the local coordinate system to the GPS static surveying of the cadastral reference points in Anyang city. In addition, the measurement results of the network RTK site calibration function and the results of the GPS static surveying network reconciliation in the local coordinate system were compared, and the performance was determined within 0.04m maximum of RMSE(Root Mean Square Error), and further study on the application method is needed.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.04a
• /
• pp.167-172
• /
• 2002

본 연구는 GPS를 이용하여 위성 영상의 입체 해석으로 산출된 SPOT영상의 기준점 및 수치 표고 모형의 평가에 목적이 있다. 이를 위해 삼각점 및 상시관측소를 고정으로 한 GPS 해석을 수행하였으며 정지측량과 이동측량의 정확도를 비교함으로써 위성 영상의 기준점과 수치 표고 모형의 평가를 위한 측량 방법을 분석하였다. 연구 결과, SPOT영상의 해상력을 고려할 때, 이동 GPS측량기법으로도 수치 표고 모형의 정확도 평가가 가능하였으며, 기준점 좌표 산출에 있어서 고정점에 삼각점 대신 상시관측점들을 사용함으로써 경제적인 GPS 측량을 꾀할 수 있었다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.3
• /
• pp.301-309
• /
• 1999

Real-time kinematic (RTK) GPS surveying which allows centimeter level accuracy of three-dimensional coordinates without post-processing has become recognized as a major advance in GPS technology. Employing On-The-Fly initialization technique, the RTK system can escape from cycle slip problems that have affected as a main obstacle factor in traditional kinematic and static approaches. The objective of this research was to evaluate accuracy and effectiveness of the RTK-GPS surveying. First, the continuous RTK observation of a base line was conducted for the purpose of finding out the repeatability of the RTK surveying and the results which were then compared against results from static surveying showed RMS errors of $\pm{3mm}\;and\;\pm{13mm}$ for their respective horizontal and vertical components. On a test network of 30 stations covering the small area, the results of RTK testing were compared against those from not only post-processing kinematic and rapid-static surveyings but conventional surveyings and also the efficiency of RTK were analyzed. In addition, geoid heights which were derived by combination of GPS and spirit leveling about all of the points within the network were compared against those derived by the PNU95 and EGM96 models respectively.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.99-102
• /
• 2007

우리나라의 교통사고발생은 OECD국가 중 인구 10만명당 사망자 14.9명으로 29개국 중 25위로 최하위권에 머물러있는 실정이다. 본 연구는 현재 적용하고 있는 우리나라 도로구조시설기준에서 정지시거에 대한 기준이 현실적이지 못하다고 분석되었기 때문에 근거리사진측량을 이용하여 3차원 모델링하고 정지시거를 명확한 근거에 기준하여 이를 규명하고자 수행하였다. 따라서 본 연구는 도로 정지시거의 기준을 재정립하여 안전하고 쾌적한 도로설계 기준을 제시하는데 그 목적이 있다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.5
• /
• pp.407-414
• /
• 2007

Even Korea is big country of automobile, the occurrence of traffic accident is in last place in 29 OECD countries. If it is evaluated by assessment guide of investment over the development project of public-traffic facilities, it was shown that the direct economical loss was fairly great. In this study, in order to minimize the traffic accidents occurring at curve area of road, it was tried to establish the standard of non-passing distance. The close-range photogrammetry was used and three dimensional modeling was fulfilled. Currently, this paper was focused on presenting the standard of road design with analyzing the internal and external standard of non-passing distance.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.5
• /
• pp.527-537
• /
• 2014

In 2013, NGII(National Geographic Information Institute) has developed and provided the KNGeoid13(Korean National Geoid Model 2013) to support the fundamental computation of GNSS-derived orthometric height. In this study, the adjusted ellipsoidal height, the sum of geoidal height and height by the leveling, is applied to calculate the GNSS-derived orthometric height without the local bias, based on GNSS static surveying and KNGeoid13. The mean of errors in GNSS-derived orthometric heights could be verified with the leveling data, which was actually less than 0.5 cm with using the adjusted ellipsoidal heights, but 3 cm by calculating differences between ellipsoidal heights and geoidal heights. By analyze the accuracy of GNSS-derived orthometric height depending on the duration of observation, we could realized 95% of data shows less than 4 cm accuracy, when the GNSS survey conducting for 4 hours spread over two days, but while the case of GNSS survey conducting for 4 hours and 2 hours respectively, resulted in 95% of data less than 5cm level of accuracy. Also, if the ambiguity is fixed, less than 10cm of accuracy could be obtained at 95% of data for only 30 minutes GNSS survey over a day. Following the study, we expected that the height determination by GNSS and geoid models can be used in the public benchmark surveying.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.39-46
• /
• 2014

Network RTK GNSS positioning technique which has been developed to overcome the limitation of Single reference station RTK is used widely in the field of general surveying, cadastre surveying and engineering surveying due to the high accuracy and efficiency. It is specified Network RTK, Single reference station RTK and Static of GNSS as a surveying method in the regulation of Cadastre Re-survey Surveying. In this study, Network RTK and Static GNSS surveying were accomplished at cadastral re-survey field in Hadong, Gyeongnam and the surveying results were compared. Also, to analyze the performance of site calibration in Network RTK surveying, two types of Network RTK surveying with and without site calibration were accomplished and the results was compared. The research result shows that average positioning error between Network RTK(VRS) without site calibration and Static surveying result is 2.44cm and 1.53cm respectively and average positioning error between Network RTK(VRS) with site calibration and Static surveying result is 0.19cm and 0.82cm respectively at two zone. So, it was proved the effect of calibration in network RTK(VRS) surveying.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.2
• /
• pp.121-127
• /
• 2000

Kinematic GPS surveying which can obtain much 3D topographical information through short-time measurement is being utilized mainly in the short baseline less than a few kilometers. Because the decision of position for the long baseline depends on the static GPS surveying which needs long time measurement, the method for measuring the position of long baseline is needed. In this study, the accuracy of the baseline according to the baseline distance, ephemeris, and observation time by GPS surveying is analysed to confirm the application of kinematic GPS surveying for the long baseline. As the result of this, the acquisition of 3D topographical information by GPS surveying in a few minutes will be possible when PDOP is less than 4, and the fast precise ephemeris is used within 60 km. Also, the accuracy is similar to that of final precise ephemeris of IGS. If a lot of studies about the long baseline kinematic GPS surveying are processed, the acquisition of topographical information for various industry including land development will be obtained more efficiently.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.1
• /
• pp.73-80
• /
• 2004

The purpose of this study is the GCP/DEM estimations through satellite stereo image interpretation using GPS. We carried out GPS observation fixing first order control points and GPS permanent stations. Comparing static surveying and kinematic surveying, we analysed the surveying methods for GCP and DEM estimations. As the results, considering SPOT image spatial resolution, the DEM can be made through satellite stereo image interpretation.

• Journal of Korean Society for Geospatial Information Science
• /
• v.8 no.2 s.16
• /
• pp.101-108
• /
• 2000

Kinematic GPS surveying which can be obtained many three-dimensional topographical informations through a short-time measurement is being utilized mainly in the short base line of a few km and below The coordinate for the long base line depends on Static GPS surveying But it needs long time measurement. Therefore, the method which can decide a position of the long base line for a short time is being needed. To examine a possibility of an efficient use of kinematic GPS surveying of the long base line, this research has analysed an accuracy of the base line by static GPS surveying according to baseline distance, ephmeris, and observation time. As the results of research, I could see that accuracy was very low in case of the occurrence of cycle slip. When we use of precise ephmeris, we obtained 1ppm and less of accuracy with one-minute kinematic GPS surveying within 70km. If a lot of studies about the long baseline kinematic GPS surveying are processed, a topographical information necessary for each kind of construction field including land development could be utilized more efficiently.