• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.5
• /
• pp.339-347
• /
• 2019

The power circuit design of an on-board S-band transmitter for KSLV-II with derating(operation of a component at less than its maximum rated specification to enhance reliability) is investigated. The power circuit of the transmitter consists of linear voltage regulators, DC/DC converters for regulating the DC supply, and diodes for reverse voltage protection. After analyzing the load current of the components, derating requirements are explored. Furthermore, power dissipation and junction temperature rise are considered with respect to the load current. The analysis is compared to the results from an engineering model of the transmitter. The temperature of the components is derated by >$40^{\circ}C$ in an environment where the ambient temperature is $+60^{\circ}C$, which is the acceptance test specification of high temperature.

• Applied Chemistry for Engineering
• /
• v.34 no.3
• /
• pp.272-278
• /
• 2023

In this study, we analyzed the effects of current density and electroosmotic phenomena on the desalination performance of electrodialysis (ED). We conducted ED experiments under constant voltage conditions, changing the concentration of the concentrate solution from 10 to 200 g/L. During the ED operation, we measured the current density and charge supplied to the stack, the concentration of the diluted and concentrated solutions, and the amount of water transported by electroosmosis to analyze desalination performance. As the concentration of the concentrated solution increased, the selectivity of the ion exchange membrane decreased, resulting in a decrease in current efficiency. Moreover, the current efficiency was found to be influenced by the current density supplied. When the current density exceeded 15 mA/cm², back diffusion of ions was suppressed, leading to an increase in current efficiency. We also investigated the specific water transport by electroosmosis during the ED operation. We found that the amount of water transported increased proportionally to the concentration ratio of the concentrated and diluted solutions. When the concentration ratio exceeded 100, the specific water transport rapidly increased due to osmotic pressure, making it challenging to obtain a concentrated solution greater than 200 g/L.

• Membrane Journal
• /
• v.11 no.1
• /
• pp.22-28
• /
• 2001

Various charged homogeneous membranes were fabricated by blending of ionic polymer with a non-ionic polymer with different ratios. In this study. sodium alginate, chitosan and poly(vinyl alcohol) were employed as anionic. cationic and non-ionic polymers, respectively. The permcation and separation behaviors of aquCOll::; salt solutions have been investigated through the charged membranes. As the content of ionic polymer increases in the membrane, the hydrophilicity of the membrane increases and pure water flux as well as solution flux increases correspondingly, indicating that the permeation performance through the membrane is cletemunecl mainly by its hydrophilicity-, Electrostatic interaction between the charged membrane and ionic solute molecules, that is. Donnan exclusion was observed to be attributed to salt rejection to a great deal of extent, and molecular sieve mechanism was effective [or the separation of the salt solution under a similar electrostatic circumstance of solutes.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1908-1910
• /
• 2001

본 논문은 마이크로머시닝 기술을 이용하여 lift-off 공정으로 패턴닝 한 후 TMAH (Tetramethylammonium Hydroxide) 용액으로 $5{\sim}100{\mu}m$ 두께의 실리콘 다이어프램을 제작하였다. Pt/Ti 박막을 HF 전해질의 mask 물질로 사용하여 HF 용액 내에서 전기화학적 방법으로 정전압을 인가, 다이어프램 영역에 다공질 실리콘을 성장시켜 관통하였다. 140$^{\circ}C$의 질소 분위기에서 $10{\sim}15{\mu}m$두께의 LDPE(Low Density Poly Ethylene) 필름을 물리적으로 다이어프램 영역에 코팅하고 $K_2CO_3$ 용액내에서 ${CO_3}^{2-}$ 이온의 barrier에 의한 전류의 감소를 전기화학적인 분석방법에 의하여 측정하였다. 일정 전압하에서 이온 농도에 기인하는 다공질 실리콘과 LDPE 표면에서 Barrier의 두께에 따른 저항의 증가를 전극으로 감지하여 농도-전류의 특성을 측정하고 이것을 기준으로 하여 미지농도의 $K_2CO_3$ 용액내의 ${CO_3}^{2-}$ 이온 농도를 측정하였다.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.68.2-68.2
• /
• 2012

한국우주전파관측망(KVN)을 이루는 각 망원경에 22GHz, 43GHz, 86GHz, 129GHz의 4개의 주파수 대역을 동시에 관측할 수 있는 전파 수신시스템을 구축하고 있다. 현재, 22GHz와 43GHz의 수신기가 설치되어 있고, 86GHz와 129GHz 수신기가 2012년 상반기에 설치 완료할 예정이다. 이들 중, 129GHz 수신기의 핵심인 초전도 전파수신소자에 공급하는 바이어스 전원의 공급 시스템을 2년에 걸쳐 설계 및 제작 완료하였다. 개발된 Bias Supply System은 주 보드, User Interface, 전용 정전압 모듈, Protection 모듈 등이 한 Sub-Rack에 결합되어 있다. 먼저, Bias Supply System 시제품 1set를 우선 제작하여 연세전파천문대의 129GHz수신기 초전도 전파수신소자 제어에 설제 적용하였다. 이를 바탕으로, 수정과 보완 및 Remote M&C 기능을 추가하여 새로 설계하고 제작한 최종 Bias Supply System 3set를 개발 완료하였고, 129GHz 수신기 3기의 초전도 전파수신소자 구동에 운용하고 있다. 본 발표에서는 그 개발 내용을 소개하고자 한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.758-761
• /
• 2003

We have designed 5 V/500 mA transless type power module by using semiconductor switching technique, key technique for small size of power supply system. The power module is suitable to a small sized electronic system using a single power supply. It is composed of switching circuit using voltage drop type chopper method, control circuit, voltage detect circuit, and constant voltage circuit, and is fabricated to hybrid-IC type. The switching regulator power supply circuit, designed in this study, has satisfied the electrical characteristics of 5 V/500 mA transless type power module.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.596-599
• /
• 2008

본 연구에서는 MicroTec을 이용하여 MOSFET 전송 특성을 분석하였다. MicroTec의 Semsim은 디바이스 시뮬레이터로써 입력 바이어스에 의해 공정 시뮬레이션인 SiDif와 디바이스 조립인 MergIC에 의해 소자를 시뮬레이션 한다. 소자에 대한 스케일링은 정전압 스케일링을 사용하였고, 채널의 길이는 100nm, 50nm, 25nm로 변화하면서 비교 분석하였다. MicroTec의 이동도 모델중 Lombardi, Constant, Yamaguchi 모델을 선택하여 이동도 모델을 비교하였다. 전류-전압 특성 곡선을 비교하였을때 Lombardi 모델과 Yamaguchi 모델보다 Constant 모델에서 결과값이 높게 나타는 것을 알 수 있었다. 또한 MicroTec의 유용성을 조사하여 시뮬레이터로서 적합함과 나노구조 소자의 스케일링 이론의 적합함을 보았다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.317-320
• /
• 2001

In this paper, we have presented the simulation results about threshold voltage at Si-based MOSFETs with channel length of nano scale. We simulated the Si-based n-channel MOSFETS with sate lengthes from 180 to 30 nm in accordance to constant voltage scaling theory. These MOSFETs had the lightly doped drain(LDD) structure, which is used for the reduction of electric field magnitude and short channel effects at the drain region. The stronger electric field at this region it due to scaling down. We investigated and analysed the threshold voltage of these devices. This analysis will provide insight into some applicable limitations at the ICs and used for basis data at VLSI.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1099-1106
• /
• 2017

In this paper, a three phase inverter control methodology for photovoltaic generation system, which is a renewable energy source, was studied. The voltage source inverter type of the constant voltage supply type was selected as the three phase photovoltaic inverter, and SWPM method was selected as control technique. a small capacity three phase photovoltaic inverter system, which has a DSP with powerful high speed data processing ability as the main controller and a solar controller as current controller to supply a certain amount of current to charge the battery, was made and tested for SPWM function.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.2
• /
• pp.309-313
• /
• 2001

In this paper, a multifunctional three-phase electronic step-down transformer with output voltage stabilization characteristics is presented for custom power applications. The proposed electronic transformer has some advantages and features as follows: 1) It has 40 % weights lighter than that of commercial magnetic transformer, 2) It has output voltage stabilization characteristic with regulated output voltage over input variations, 3) It cab be operated as circuit breaker in the case of emergency, 4) It can be operated with so called soft starting function. Moreover, the electronic transformer may have stand-by power cutoff function and act as distortion compensator. This paper show the circuit diagram and present its features through various PSPICE simulations.