• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1563-1571
• /
• 1991

본 연구에서는 가상일 원리로 부터 유한 요소 수식화를 updated-Lagrangian 형태로 유도하였으며, 유도된 수식화를 연속체 유한 요소로 유한 근사화 하였다. 이 때 초소성 재료의 거동은 비압축성, 비선형 점성 유ㄷ옹으로 묘사하였다. 유한 요소 프로그램은 성형 기구 해석과 하중 압력을 제어하는 기법으로 구성되어 있으며 하중 압력의 제어는 성형 시간이 최소가 되게 하기 위하여 변형률 속도 민감 계수가 최대가 되고, 국부 변형에 의한 두께 감소를 방지하며 변형률 속도는 일정하게 유지되면서 성 형이 될 수 있도록 하였다. 즉 하중 압력 제어는 상당 변형률 속도가 최대가 되게하 여 성형 시간을 최소화하게 구성하였다.개발된 유한 요소 프로그램은 정수압 벌징 가공에 적용하였으며 최적 압력 시간 선도, 성형 형상, 두께 및 두께 변형률 분포, 상 당 변형률 분포 등을 구하였다.

• Geotechnical Engineering
• /
• v.9 no.2
• /
• pp.27-40
• /
• 1993

This paper proposes a new procedure carrying out a series of consolidated-undrained triaxial tests with a specimen. In this procedure high confining pressure applied to the specimen keeps constant during the test and each stage of consolidation can be controlled by partial drainage. With this procedure the test time is remarkably reduced by performing a series of triaxial tests with a single specimen. In order to verify the appliesbility of the procedure, standard triaxial compression tests and conventional multi -stage triaxial testy are performed for both undisturbed and disturbed samples and the results are compared with those of the proposed procedure. The comparison shows that strength parameters determined by the proposed procedure are well agreed with those of the other tests and thus it can be said that the procedure is very effective and practical in determining strength parameters.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.224-231
• /
• 2019

Recently, the pollution of groundwater has become serious. In particular, the contamination of groundwater near livestock farms is becoming increasingly severe and it is difficult to drink with drinking water. In this paper, a groundwater purifier apparatus that can be installed in a community well was designed. The designed groundwater purifier apparatus enables a RO membrane filter and UV sterilization to remove pollutants, such as heavy metals, bacteria, and organic compounds. In addition, electrical conductivity, pressure, and flow sensors were added for remote monitoring. Remote monitoring of the system can determine the level of fouling and contamination of RO membrane filters through pressure and flow sensor data, and can record changes in the contamination and condition of groundwater through the electrical conductivity of the feed water. The designed groundwater purifier apparatus was installed at a farmhouse and remote monitoring. The result after 15 days of operating a groundwater purifier apparatus and analyzing the monitoring data revealed an average permeate water flow rate of 2.67L/min and an average water pressure of 7.09kgf/㎠, indicating that the RO Membrane filtered without fouling and clogging. The average electrical conductivity was 796.6 S/㎠ of the feed water and 55.6 S/㎠ of permeate water, which is similar to that of general tap water. Through this, it was confirmed that no pollutant occurred in the surroundings. Therefore, the designed groundwater purifier apparatus can confirm the replacement time of the RO membrane filter in advance through remote monitoring, and check the pollution state of the groundwater.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.4
• /
• pp.48-55
• /
• 1999

In this paper, the ill-posed inverse problem of surface waves caused by a two-dimensional pulsating pressure distribution on the free surface is studied using the regularization method. In order to exemplify the method, a cosine pressure distribution on a limited range of the undisturbed free surface is considered. By taking the resulting horizontal velocity as input data, the corresponding pressure is determined numerically by three different regularization schemes. It is found that the iterated Tikhonov method provides with the most accurate result, while solutions obtained from the Landweber-Friedman regularization are most stable.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.453-457
• /
• 2004

본 연구에서는 WES의 표준 월류형 여수로에 대한 동수역학적인 흐름거동을 FLOW-3D 모형을 이용하여 해석하였다. 월류수두에 따른 월류유량, 월류흐름의 수면곡선, 여수로 표면에서의 압력분포와 같은 모의결과는 WES의 실험자료와 잘 일치하였다. 그리고 월류수두가 여수로 설계수두의 1.33배인 경우의 유속과 압력의 연직분포를 검토하였다. 검토결과, 웨어마루를 통과하면서 저층의 유속이 먼저 가속되며 점차 하류로 이동하면서 수표면의 유속이 가속되어 거의 균일한 유속분포를 보였으며, 압력의 연직분포는 웨어마루 상류에서는 수표면에서 내기압을 보이고 점차 수심이 길어짐에 따라 정수압분포와 유사한 분포를 보이나, 여수로 표면에 접근함에 따라 급격하게 압력이 감소하면서 부압이 발생하였다. 웨어마루 하류에서는 여수로 표면에서의 압력이 점차 대기압으로 접근함에 따라, 거의 전 수심에 걸쳐 대기압과 유사한 분포를 보였다.

• Korean Journal of Ecology and Environment
• /
• v.54 no.4
• /
• pp.272-279
• /
• 2021

A pump-type eDNA filtering system that can control voltage and hydraulic pressure respectively has been developed, and applied a filter case that can filter out without damaging the filter. The filtering performance of the developed system was evaluated by comparing the eDNA concentration with the conventional vacuum-pressured filtering method at the catchment conduit intake reservoir. The developed system was divided into a voltage control (manual pump system) method and a pressure control (automatic pump system) method, and the pressure was measured during filtering and the pressure change of each system was compared. The voltage control method started with 65 [KPa] at the beginning of the filtering, and as the filtering time elapsed, the amount of filtrate accumulated in the filter increased, so the pressure gradually increased. As a result of controlling the pressure control method to maintain a constant pressure according to the designed algorithm, there was a difference in the width of the hydraulic pressure fluctuation during the filtering process according to the feedback time of the hydraulic pressure sensor, and it was confirmed that the pressure was converged to the target pressure. The filtering performance of the developed system was confirmed by measuring the eDNA concentration and comparing the voltage control method and the hydraulic control method with the control group. The voltage control method obtained similar results to the control group, but the hydraulic control method showed lower results than the control group. It is considered that the low eDNA concentration in the hydraulic control method is due to the large pressure deviation during filtering and maintaining a constant pressure during the filtering process. Therefore, rather than maintaining a constant pressure during filtering, it was confirmed that a voltage control method in which the pressure is gradually increased as the filtrate increases with the lapse of filtering time is suitable for collecting eDNA. As a result of comparing the average concentration of eDNA in lentic zone and lotic zone as a control group, it was found to be 96.2 [ng µL^-1] and 88.4 [ng µL^-1l], respectively. The result of comparing the average concentration of eDNA by the pump method was also high in the lentic zone sample as 90.7 [ng µL^-1] and 74.8 [ng µL^-1] in the lentic zone and the lotic zone, respectively. The high eDNA concentration in the lentic zone is thought to be due to the influence of microorganisms including the remaining eDNA.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2099-2100
• /
• 2011

본 논문은 ${\circ}{\circ}$댐에서 원수를 공급받는 ${\circ}{\circ}$정수장(이하 정수장) 유입관로의 잉여압력을 이용하여 소수력 발전기를 설치하고, 정수장 여유부지에 태양광발전설비를 계획하여 총163.4kW(Peak 사용전력 128.16kW)의 시설용량으로 연간전력사용량(451 MWh) 대비 110% 정도의 발전생산(약500MWh)이 가능한 에너지자립형 개념의 정수장을 설계한 사례이다.

• Proceedings of the Korea Contents Association Conference
• /
• 2012.05a
• /
• pp.431-432
• /
• 2012

상수도관의 노후화에 따라 빈번히 발생하는 상수관망의 용수공급 중단의 피해를 저감하고 관망내에서 발생하는 용수의 수질저하를 방지하기 위하여 용수공급 블록단위에 소규모의 수직형 정수처리 시설을 설치하는 방안이 연구되고 있다. 이와 같이 설치되는 수직형 정수처리 시설을 기존 관망내에 적절한 위치에 설치하여야 최대의 효과를 가져올 수 있다. 이를 위하여 EPANET을 활용하여 수직형 정수처리 시설을 다양한 지점에 설치한다고 가정한 후 개별 설치지점별 수리학적 안정성을 절점의 압력변동폭으로 정량화하여 최적위치를 결정할 수 있는 방법을 제안하였다. 제안된 방법을 국내 A 관망에 적용하여 적용성을 검증하였다.

• Journal of Korea Water Resources Association
• /
• v.47 no.12
• /
• pp.1177-1185
• /
• 2014

This study suggests a new hydrostatic pressure distribution corrected for nonuniform flow over a channel of large slope. For analyzing shallow-water flows over large slope accurately, it is developed a finite-volume model incorporating the pressure distribution to the shallow water equations. Traveling speed of the hydraulic jump downstream a parabolic bump in the drain case is quite reduced by the weakened bottom gradient source term in the model with the pressure correction. In simulating the dam-break flow over a triangular sill, it is identified that the model with pressure correction could capture the water surface by the digital imaging measurements more than the model without that. Due to the pressure correction decreasing the reflected flows on and increasing overflows over the sill, there are good agreements in the experiment and the simulation with that. Therefore, this model is expected to be applied to such practical problems as flows in the spillway of dam or run-up on the beach.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1995.06a
• /
• pp.48-53
• /
• 1995

본 논문에서는 정수압 구면 베어링의 정확한 해석을 위해 구면 베어링 틈새의 유체 유동의 지배 방정식인 구면 좌표계 레이놀즈 방정식을 수치 해석으로 해석하였다. 이를 통해 구한 유체의 압력 분포를 이용하여 베어링의 하중 지지 용량, 유량 및 강성을 구하고 이를 도시하여 설계 타당성을 검증하였다.