• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.4
• /
• pp.318-324
• /
• 2013

For blind channel equalization, the reliability of signal estimate determines the convergence speed and steady-state performance of the equalizer. Therefore the nonlinear estimator and reference signal being used in signal estimate should be chosen appropriately. In this paper, to increase the reliability of the signal estimate, two errors were obtained by applying coarse signal points and dense signal points respectively to signal estimate, the relative reliabilities of two errors were calculated, then the equalizer was adapted deferentially utilizing the reliabilities. At this point, by applying two errors alternately, two modes of operation were smoothly combined. Through computer simulations the proposed method was confirmed to achieve fast transient state convergence and low steady-state error compared to traditional methods.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.1
• /
• pp.81-88
• /
• 2007

In this paper, a new single-phase utility-interactive inverter system for residential power generation with fuel cell is proposed. The proposed inverter system is not only capable of working in both stand-alone and grid-connected mode, but also ensures smooth and automatic transfer between the two modes of operation. The proposed control method has little steady-state error and good transient response characteristic. Also, the control method can be implemented using low-cost, fixed point DSP since it has simpler structure, smaller amount of calculation, and smaller number of sensors. The controller for the proposed utility-interactive inverter system is described, and the validity is verified through simulation and experiment.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.7
• /
• pp.945-951
• /
• 2007

Noise cancellation is essential for the devices which use speech as an interface. In real environments, speech quality and recognition rates are degraded by the auditive noises coming near the microphone. In this paper, we propose a noise cancellation algorithm using stereo microphones basically. The advantage of the use of multiple microphones is that the direction information of the target source could be applied. The proposed noise canceller is based on the Wiener filter. To estimate the filter, noise and target speech frequency responses should be known and they are estimated by the spectral classification in the frequency domain. The performance of the proposed algorithm is compared with that of the well-known Frost algorithm and the generalized sidelobe canceller (GSC) with an adaptation mode controller (AMC). As performance measures, the perceptual evaluation of speech quality (PESQ), which is the most widely used among various objective speech quality methods, and speech recognition rates are adopted.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.5
• /
• pp.94-105
• /
• 2010

To detect faults in an inverter-fed permanent magnet synchronous motor (PMSM) drive under the circumstance having faults in a stator winding and inverter switch, an on-line basis fault detecting scheme during operation is presented. The proposed scheme is achieved by monitoring the second-order harmonic component in q-axis current and the fault is detected by comparing these components with those in normal conditions. The linear interpolation method is employed to determine the harmonic data in normal operating conditions. As soon as the fault is detected, the operating mode is changed to identify a fault type using the phase current waveform. To verify the effectiveness of the proposed fault detecting scheme, a test motor to allow inter-turn short in the stator winding has been built. The entire control algorithm is implemented using DSP TMS320F28335. Without requiring an additional hardware, the fault can be effectively detected by the proposed scheme during operation so long as the steady-state condition is satisfied.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.5
• /
• pp.1054-1065
• /
• 1993

A computer simulation is performed on the effectiveness of the active minimization of harmonically excited enclosed sound fields for producing global reduction in the amplitude of the pressure fluctuations. In this study for the appreciable reductions in total time averaged acoustic potential energy, $E_{pp}$, the transducer location strategies for three dimensional active noise control is presented based on a state space modal which approximates the closed acoustic field.In this study, the above theoretical basis is used to investigate the application of active control to sound fields of low modal density. By the used of room-like 3-dimensional rectangular enclosure it is demonstrated that the reductions in $E_{pp}$ can be achieved by using a single secondary source, provided that the source is placed within the half a wavelength from the primary source and placed away from nodal line of the sound field. Concerning the reductions in $E_{pp}$ by minimzing the pressure in sound fields by the use of 3-dimensional rectangular enclosure, the effects of the number of sensors and the locations of these sensors are investigated. When a few modes dominate the response it is found that if only a limited number of sensors are located away from nodal line and located at the pressure maxima of the sound field such as at each corner of a rectangular enclosure.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.27-28
• /
• 2013

이 논문에서는 부분 그늘짐에서도 다중 태양광 모듈의 최대 전력점 추종이 가능한 셔플링 차동전력 마이크로 컨버터를 설계 및 구현하였다. 마이크로 컨버터 시스템은 PV에 직접 연결된 셔플링 컨버터와 이후 단으로서 부스트 컨버터가 존재한다. 셔플링 컨버터는 다이렉트-시비율 기법을 통하여 PV모듈을 최대전력으로 동작시키고, 부스트 컨버터는 전압루프를 통하여 P&O 방식으로 최대 전력점을 추종하였다. PV 모듈에 병렬로 셔플링 컨버터를 적용함으로써, 다중 태양광 모듈의 전류 편차를 차동전력으로 조절하여 각각의 최대 전력점을 추종하면서 안정된 동작을 유지할 수 있다. 제안하는 컨버터는 2개의 PV모듈이 연결된 정상상태 연속모드 (CCM) 160[W]급 마이크로 컨버터 하드웨어 프로토타입을 통해 동작특성을 분석하였다.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.295-296
• /
• 2011

본 논문에서는 PSCAD/EMTDC 프로그램을 통해 HVDC 제어기를 설계하였다. HVDC 제어기는 컨버터의 운전모드에 따라서 인버터 제어기와 정류기 제어기로 나뉘며, 인버터 제어기는 전류제어기, 전압제어기, 소호각 제어기로 구현하고, 정류기 제어기는 전류제어기 및 전압제어기로 구현하였다. HVDC V-I 특성곡선에 VDCOL을 적용하여 전압에 따른 전류의 의존 특성을 반영하였다. ac 계통 단상 지락 고장, 3상 지락 고장에 대해 시뮬레이션하여 설계한 제어기의 정상상태 및 과도상태시 응답성능을 검증하였다.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.3
• /
• pp.196-205
• /
• 2004

Although many papers about the interleaved boost converter(IBC) have been published, there are, unfortunately, no analytical and rigorous expressions for steady-state operation of the N-phase IBC. To understand the operating characteristics of the N-phase IBC, the averaged state equation and the general steady-state solutions are derived in this paper. The general expressions of the current unbalance due to the parameter mismatch, the inductor and input current ripples, and the output voltage ripple are also presented. Through the analytical expressions presented, the steady-state characteristics of the N-phase IBC are analyzed theoretically and verified experimentally.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1151-1152
• /
• 2011

본 논문에서는 부스트-플라이백(Integrated Boost-Flyback Converter, IBFC) 직렬 연결 구조 컨버터의 동작 특성 해석 및 정확한 제어기 설계를 위한 개선된 모델링 방법을 제시한다. 주 스위치에 의해 IBFC의 부스트, 플라이백 컨버터가 서로 다른 도통 모드로 동시에 동작 하기 때문에 2대 컨버터의 모델링과 회로 해석을 위한 이론적인 모델링 접근방법과 수학적인 계산과정이 복잡하다. 따라서 IBFC를 등가 전류 소스를 포함한 부스트, 플라이백 컨버터로 각각 나누어 상태 공간 평균화 방법을 이용하여 회로 방정식을 독립적으로 유도한 후, 이 회로 방정식을 종합하여 IBFC의 완전한 상태 공간 방정식을 얻을 수 있다. 제안된 방법은 IBFC의 복잡한 모델링을 간단하게 해 주며, 수학적인 계산 과정도 간소화 시킬 수 있는 장점이 있다. 이를 바탕으로 정상 상태 해석 및 높은 출력 전압 추종 제어기를 설계하였다. 시뮬레이션과 실험 결과를 제시하여 제안된 방법의 유효함을 검증하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.238-242
• /
• 2007

자동차의 고장은 그 종류나 특징면에서 다양하게 나타나게 되므로 자동차의 진단과 점검에는 많은 노동력과 비용, 시간이 소요되며 운전자에 의한 정보를 기대하기 힘든 경우에는 진단이나 정비과정에 많은 어려움을 겪게 된다. 따라서 본 연구에서는 운전자에 의한 일반적인 정보와 진동 소음센서에 의한 정보의 신호처리기술을 종합하여 자동차 부품의 이상 신호 분석을 하였다. 그리고 정상 상태 대비 이상 신호에 따른 진동 소음 데이터 변화율을 계산하여 작동 모드 별 실내음압에 영향을 미치는 신호 및 해당 주파수 특성을 분석하였다. 이에 따라 자동차 정비 전문가 시스템 구축을 위한 기초 연구로 엔진부의 이상 신호와 각 부품 별 이상 신호로 나누어 분석하여 데이터 처리 과정 및 이상 증상 별 경향 파악에 본 연구의 목적을 둔다.