• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.12
• /
• pp.1281-1288
• /
• 2012

This paper presents the design and implementation of a multi-mode mobile broadcasting Emergency Warning System (EWS) transmission and reception system which enables the propagation of disaster information using the encoding and transmission, reception and decoding methods specified in diverse mobile broadcasting standards. The implemented system supports global mobile broadcasting standards such as Terrestrial Digital Multimedia Broadcasting (T-DMB), Digital Video Broadcasting-Handheld (DVB-H), Integrated Services Digital Broadcasting-Terrestrial (ISDB-T), and the Digital Radio Mondiale (DRM) digital radio standard. The system consists of two key part: an encoding/transmission part and a reception/decoding part. The multi-mode mobile broadcasting EWS encoding and transmission system generates EWS data according to each broadcasting specification. The generated EWS data is then transmitted through a channel interface which meets the commercial broadcasting equipment specification. The receiver system receives and decodes the EWS data on a single hardware platform and can display the results on screen. Verification and conformity testing has been carried out on the implemented system by transmitting emergency data for each mode in real-time and displaying the received information in text on the receiver display.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.3
• /
• pp.129-139
• /
• 2008

The purpose of the present work is to derive the reflection and transmission coefficients of $S_0\;and\;A_0$ mode Lamb waves in relation to the geometry of a rectangular notch when the waves propagate across the notch in an elastic plate. Firstly, the excitable modes of the Lamb wave were analyzed with respect to the plate thickness. The scattering phenomena were divided into three independent processes according to the boundary shape of the notch and the direction of the wave propagation. Linear equations for each process were derived with corresponding free or continuous boundary conditions to analyze the scattered waves. By the rule of linear superposition, the waves scattered at each process were summed for each mode. Then the steady-state reflection and transmission coefficients of the scattered waves were determined so that the difference of energy flux between the incident and the scattered waves would remain within 4%.

• Journal of Institute of Control, Robotics and Systems
• /
• v.2 no.1
• /
• pp.9-13
• /
• 1996

슬라이딩 모드 제어기의 실현시 발생하는 고주파 chattering 현상을 제거하기 위하여 본 논문에서는 스위칭 표면 행렬의 Range-space 동특성을 이용한 연속 시간 스위칭 다이나믹을 제안한다. 전체 폐루프 시스템은 정칙 변환에 의해 빠른 부시스템과 느린 부시스템으로 분해되어, 결국 전체 폐루프 시스템의 고유치는 각각 스위칭 표면 행렬의 Range-space와 Null-space의 동특성을 지배하는 부시스템들의 고유치들로 구성됨을 보인다. 그리고, 정합된 불확실성이 존재하는 경우 제안된 스위칭 다이나믹을 가진 제어 시스템의 응답은 일정 시간이 경과된 후 스위칭 평면의 임의의 영역으로 균일하게 유계된다는 것을 증명한다. 또한, 제어 입력의 크기에 대한 제약성을 만족하면서도 전체 제어 시스템의 정상 상태 오차를 감소시키기 위하여 두개의 스위칭 다이나믹을 도입한 수정된 슬라이딩 모드제어기를 제안한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.98-104
• /
• 2006

The conventional burst-mode APC(Automatic Power Control) circuit had an effective structure that was suitable for a low power consumption and a monolithic chip. However, as data rate was increased, it caused errors due to the effect of the zero density. In this paper, we invented a new structured peak-comparator which could compensate the unbalance of the injected currents using double gated MOS and MOS diode. And we proposed a new burst-mode APC adopting it. The new peak-comparator in the proposed APC was very robust to zero density variations maintaining the correct decision point of the current comparison at high data rate. It was also suitable for a low power consumption and a monolithic chip due to lack of large capacitors.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.4
• /
• pp.451-458
• /
• 2012

In this paper, the design study of a new convertible six d.o.f underwater robot which can be a ROV or AUV according to underwater work purpose is presented. A structure design about the ROV and the AUV and its design on the control system is presented. In case of the AUV, an analysis on thruster forces in accordance with operating speed has been performed. A sensor fusion board which can proceed various sensor signals to identify correct positions and speeds has been developed and a total control system including EKF(Extended Kalman Filter) has been designed and developed.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.70.2-70.2
• /
• 2013

한국천문연구원은 일본국립천문대와 한일공동으로 개발한 한일공동VLBI상관기(KJJVC)의 VLBI 관측자들에게 연구결과를 제공할 수 있는 정상운영을 2013년부터 수행하였다. 한일상관센터(KJCC)에서는 평균 8시간정도 관측한 VLBI 관측자료의 상관처리에 소요되는 시간은 약 2주 정도이며, 데이터 분석가의 확인을 거친 후 담당 PI에게 상관결과를 전달하고 있다. 현재 상관처리는 다양한 관측모드 중에서 연구관측에서 많은 비중으로 차지하고 있는 C5(16MHz 대역폭에 16stream) 모드를 지원하고 있으며, 2013년도에 여러 연구자들의 요구에 대응하기 위해 Wideband(512MHz 대역폭), C1(256MHz 대역폭, 1stream), C2(128MHz 대역폭, 2stream) 모드를 지원할 수 있도록 시스템의 성능을 개선할 예정이다. 또한 일본국립천문대에서는 자기테이프를 사용하고 있는 VERA 관측망에 대해 관측자료의 복사시간 단축, 운영효율을 향상시키기 위해 하드디스크를 채용한 OCTADISK 시스템을 개발하였으며, 한일상관센터에도 동기재생처리장치에 장착된 2대의 OCTADDB를 OCTADISK로 수정작업을 추진하였다. 본 보고에서는 이상에 기술한 것과 같이 한일상관센터의 운영현황과 향후 계획에 대해 자세히 기술한다.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.4
• /
• pp.76-86
• /
• 1998

Structural intensity of plates experiencing bending vibration is analytically evaluated using the modal analysis based on assumed mode method. To evaluate the convergence of structural intensity according to the number of superposition modes, the power obtained by structural intensity integration over the closed curve containing the excitation source is compared with the power injected into plates. The erect of power reduction due to the material internal loss is evaluated using the intensity around a localized damping point, In addition, the dominant component among internal forces in the power transfer by the bending vibration of plates and the change of power flow due to stiffener are also investigated.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.225-226
• /
• 2015

이 논문에서는 ITER 초전도 코일 전원 장치 중 진공 용기내에 형성된 자장의 오차를 보정해주는 CCU/L 컨버터의 4 상한 운전을 위한 제어 알고리즘을 설명하고, 제어 알고리즘을 실제 컨버터에 적용하여 구현하였다. ITER CCU/L 컨버터는 4 상한 제어를 통해 영 전류 불연속 구간 없이 Correction Coil에 전압(${\pm}85V$), 전류(${\pm}10kA$)를 공급해야 하고, 이를 위해선 4 상한 운전을 위한 제어가 매우 중요하다. 4 상한 운전은 다섯 가지 모드에서 동작된다. 본 논문에서, 각 모드에 대해 설명하고, 컨버터가 각 모드에서 정상적으로 제어되는지 시뮬레이션 및 실제 시험을 통해 검증하였다.

• Journal of the Korean Society for Railway
• /
• v.15 no.3
• /
• pp.237-243
• /
• 2012

In this paper, a magnetic analysis of SRM(Switched Reluctance Motor) using 3d finite element method considering end-coil effect is presented. SRM models with different stator pole shapes are taken into consideration for the analysis of magnetic characteristics. It is observed that a stator pole shape model having a pole shoe depth is the most suitable one for railway traction application because it gives an improved inductance and torque characteristic. For a speed control of SRM, the PI and sliding mode controllers are applied to designed SRM with magnetic characteristic data obtained from the magnetic analysis. The simulations are carried out using Matlab-Simulink and the control performance is analyzed. By employing the sliding mode controller, the transient response as well as the steady-state error are much improved under a load variation of railway resistance under operation.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.343-346
• /
• 2005

Three dimensional structures of detonation wave propagating through a square-shaped duct were investigated using computational method and parallel processing. Inviscid fluid dynamics equations coupled with $variable-{\gamma}$ formulation and simplified one-step Arrhenius chemical reaction model were analysed by MUSCL-type TVD scheme and four stage Runge-Kutta time integration. The unsteady computational results in three dimension show the detailed mechanism of transverse mode and diagonal mode of detonation wave instabilities resulting same cell length but different cell width in smoked-foil record.