• Tunnel and Underground Space
• /
• v.34 no.2
• /
• pp.154-168
• /
• 2024

The Tunnel Boring Machine (TBM) disc cutter is subjected to wear and damage during the rock excavation process, and the worn disc cutter should be replaced on time. The manual inspection by workers is generally required to determine the disc cutter replacement. In this case, the workers are exposed to dangerous environments, and the measurements are sometimes inaccurate. In this study, we developed a technology that measures the disc cutter wear in real time. From a series of laboratory tests, a magnetic sensor was selected as the wear sensor, and the real-time disc cutter measurement system was developed integrating wireless communication modules, power supply and data processing board. In addition, the measurement system was verified in actual TBM excavation circumstances. As a result, it was confirmed that the accuracy and stability of the system.

• Journal of Cadastre & Land InformatiX
• /
• v.51 no.1
• /
• pp.39-51
• /
• 2021

Recently, there has been much interest in practical use of standardized HD map that can effectively define roads, lanes, junctions, road signs, and road facilities in autonomous driving. Various kinds of de jure or de facto standards such as ISO 22726-1, ISO 14296, HERE HD Live map, NDS open lane model, OpenDRIVE, and NGII HD map are currently being used. However, there are lots of differences in data modeling among these standards, it makes difficult to use them together in autonomous driving. Therefore, we propose a data model conversion method to enable an efficient use of various kinds of HD map standards in autonomous driving in this study. Specifically, we propose a conversion method between the NGII HD map model, which is easily accessible in the country, and the OpenDRIVE model, which is commonly used in the autonomous driving industry. The proposed method consists of simple conversion of NGII HD map layers into OpenDRIVE objects, new OpenDRIVE objects creation corresponding to NGII HD map layers, and linear transformation of NGII HD map layers for OpenDRIVE objects creation. Finally, we converted some test data of NGII HD map into OpenDRIVE objects, and checked the conversion results through Carla simulator. We expect that the proposed method will greatly contribute to improving the use of NGII HD map in autonomous driving.

• Journal of Cadastre & Land InformatiX
• /
• v.51 no.2
• /
• pp.151-168
• /
• 2021

This study compared and analyzed the effect of the burden of household expenditure in the metropolitan and non-metropolitan areas on the intention to childbirth intention to married women using a panel logit model. To this end, this analysis targeted married women aged 25 to 39 who are highly likely to be fertile. The main results are as follows; First of all, it was confirmed that the economic power of spouse can be an important factor in the childbirth intention regardless of region. Second, it was found that the higher the satisfaction of marriage had a positive effect on the childbirth intention, and also higher the value that children must have, the higher the childbirth intention. Third, it was confirmed that the burden of household expenditure is the most important factor in the willingness to childbirth intention, excluding factors such as the number of existing children. In particular, the burden on education spending in both the capital region and non-capital region was found to be a key reason for the decrease in the childbirth intention. Lastly, the burden of household expenditure showed different effects on childbirth intention on depending on the region. Specifically, in the capital region, medical spending and loans had a greater impact, while, in the non-capital region, transportation and communication costs had a greater impact on childbirth intentions. Through the results, this study confirmed the implication that easing the burden on household expenditure is continuously necessary to enhance childbirth, and that discriminatory policy approaches are required depending on the area of residence.

• Journal of the Society of Disaster Information
• /
• v.19 no.1
• /
• pp.216-230
• /
• 2023

Purpose: The purpose is to prevent accidents by predicting disasters through the analysis of near-miss. Method: In this study, a near-miss literature review and data were collected at construction sites, and a questionnaire survey was conducted to use logistic regression analysis and decision tree analysis to classify the possibility of near-miss connection. Result: As a result of analyzing the effects of near-miss types on mental, physical, and safety habits and behaviors, the factor with a high influence on the body is the need for near-miss management, the type of job is electricity·information communication, and health status in order, and the mental factor is the construction scale The influence was high, and the factors with the highest influence on the habit behavior factors were analyzed in the order of experience, number of serious injuries, and occupation in order of illusion, inappropriate work instructions, and body parts. Through decision tree analysis, factors and patterns that affect the possibility of a near-miss being a surprise accident were identified. Conclusion: Construction site officials consider the observation of near-miss and mentally and physically. Specific management of the relevance of physical aspects to near-miss should be implemented, and a work environment in which serious accidents are reduced is expected through personnel allocation, work plans, work procedures and methods, and feedback so that inappropriate work instructions do not lead to near-miss.

• Journal of the Society of Disaster Information
• /
• v.11 no.1
• /
• pp.135-147
• /
• 2015

Recent underground common utility tunnels are underground facilities for jointly accommodating more than 2 kinds of air-conditioning and heating facilities, vacuum dust collector, information processing cables as well as electricity, telecommunications, waterworks, city gas, sewerage system required when citizens live their daily lives and facilities responsible for the central function of the country but it is difficult to cope with fire accidents quickly and hard to enter into common utility tunnels to extinguish a fire due to toxic gases and smoke generated when various cables are burnt. Thus, in the event of a fire, not only the nerve center of the country is paralyzed such as significant property damage and loss of communication etc. but citizen inconveniences are caused. Therefore, noticing that most fires break out by a short circuit due to electrical works and degradation contact due to combustible cables as the main causes of fires in domestic and foreign common utility tunnels fire cases that have occurred so far, the purpose of this paper is to scientifically analyze the behavior of a fire by producing the model of actual common utility tunnels and reproducing the fire. A fire experiment was conducted in a state that line type fixed temperature detector, fire door, connection deluge set and ventilation equipment are installed in underground common utility tunnels and transmission power distribution cables are coated with fire proof paints in a certain section and heating pipes are fire proof covered. As a result, in the case of Type II, the maximum temperature was measured as $932^{\circ}C$ and line type fixed temperature detector displayed the fire location exactly in the receiver at a constant temperature. And transmission power distribution cables painted with fire proof paints in a certain section, the case of Type III, were found not to be fire resistant and fire proof covered heating pipes to be fire resistant for about 30 minutes. Also, fire simulation was carried out by entering fire load during a real fire test and as a result, the maximum temperature is $943^{\circ}C$, almost identical with $932^{\circ}C$ during a real fire test. Therefore, it is considered that fire behaviour can be predicted by conducting fire simulation only with common utility tunnels fire load and result values of heat release rate, height of the smoke layer, concentration of O2, CO, CO2 etc. obtained by simulation are determined to be applied as the values during a real fire experiment. In the future, it is expected that more reliable information on domestic underground common utility tunnels fire accidents can be provided and it will contribute to construction and maintenance repair effectively and systematically by analyzing and accumulating experimental data on domestic underground common utility tunnels fire accidents built in this study and fire cases continuously every year and complementing laws and regulations and administration manuals etc.

• KEPCO Journal on Electric Power and Energy
• /
• v.4 no.2
• /
• pp.75-80
• /
• 2018

The smart city is developing an energy system efficiently through a common management of the city resource for the growth and a low carbon social. However, the smart city doesn't counter a verification effectively about a anomaly pattern detection when existing security technology (authentication, integrity, confidentiality) is used by fixed security key and key deodorization according to generated big data. This paper is proposed the "security nonce generation based on security nonce generation" for anomaly pattern detection of the adversary and a safety of the key is high through the key generation of the KDC (Key Distribution Center; KDC) for improvement. The proposed scheme distributes the generated security nonce and authentication keys to each facilities system by the KDC. This proposed scheme can be enhanced to the security by doing the external pattern detection and changed new security key through distributed security nonce with keys. Therefore, this paper can do improving the security and a responsibility of the smart city platform management data through the anomaly pattern detection and the safety of the keys.

• Smart Media Journal
• /
• v.11 no.7
• /
• pp.28-38
• /
• 2022

The term 'fourth industrial revolution' was mentioned at the World Economic Forum (WEF) in 2016 and has become a term representing a new industrial era based on information and communication technology (ICT). In the environment of the 4th industrial revolution, ESG management activities are becoming a very important factor in business activities. With the emergence of a new paradigm of organizational operation in the post Covid19 era, the demands for ESG (Environment, Social, Governance) investment related to the environment, social responsibility are increasing. This study examines the role that can support ESG management by utilizing the expertise of appraisers. Real estate is one of the fields of high public interest, and since most ESGs have been conducted centered on the role of private companies, the role of the expert group or the role of public corporations and public institutions is relatively insufficient. If a company or general company engaged in the real estate investment business establishes the role of the Korea Appraisers Association to revitalize ESG management using appraisers, such as ESG appraisers, when investing in real estate, it is believed that it will be possible to promote efficient and sound development of the real estate industry. It was judged that a study on a group of experts was also necessary. In addition, even if the impact of Covid-19 is excluded, it is necessary to gradually introduce an appraisal using non-face-to-face or various advanced technologies (the 4th industry). This study differs from previous studies in that it focused on the role of ESG by the Korea Association of Property Appraisers while research on the role of ESG in public institutions or expert groups is being actively conducted in recent years.