• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.190-191
• /
• 2001

단주기 격자를 이용한 광섬유 레이저는 차세대 대용량 파장분할 통신과 광 CATV 방송망에 대한 DFB 반도체 레이저의 대체 광원으로 많은 연구가 진행되고 있다. 좁은 파장영역에 대한 선택적 반사특성을 가지는 광섬유 단주기 격자의 특성을 이용하면 간단한 구조의 고출력을 가지면서 낮은 잡음의 수백 kHz대의 짧은 주파수 폭을 가지는 광섬유 레이저를 얻을 수 있다. 또한 반도체 DFB 레이저에서는 구현하기 어려운 정밀한 파장 선택성을 가지는 광섬유 레이저를 구현할 수 있다. (중략)

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.1
• /
• pp.109-116
• /
• 2012

The effect of the grid resolution on the hydrodynamic simulation has been investigated by using CCHE2D and EFDC. Since a high resolution of the grid results in the increase of computation time, an appropriate grid resolution should be selected by considering the efficiency of simulation according to the objectives of projects. In order to understand the effect of grid resolution and determine the optimal grid resolution, several cases with different lateral grid resolutions have been simulated for the reach of Nakdong river at the confluence of Kumho river for the floods in 2006. Orthogonal curvilinear grids for the domain have been constructed from the survey products at the sections with the longitudinal interval of 20 m. Area-elevation curve and the comparison of simulated results with measured stage at the specific station have been used to check the effect of grid resolution. From the results, the existence of optimal grid resolution has been observed, which ensure both efficiency of computation and certainty of results.

• Analytical Science and Technology
• /
• v.5 no.1
• /
• pp.111-114
• /
• 1992

Ordering phenomena were observed for Zn and Ta cations of $Ba(Zn_{1/3}Ta_{2/3})O_3$ under particular heat treatments, followed by a considerable lattice distortion. This lattice distortion was measured by X-ray powder diffraction with a precision of higher than 1/10,000. From this investigation, a significant lattice distortion occurred within 30 min. of sintering at $1350^{\circ}C$, and it was increased with sintering time.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.95-95
• /
• 1999

격자부정합한 반도체 양자점은 광전소자 분야의 활용가능성으로 인하여 많은 연구가 진행되고 있다. 특히 반도체 레이저 분야에서는 양자우물 레이저에 비하여 낮은 문턱전류 밀도, 높은 이득, 높은 양자효율, 그리고 극한 물성 등의 장점을 가지고 있다. 격자부정합한 구조로 양자점을 형성시키는 대표적인 물질이 InAs이다. InAs(격자상수 6.058 $\AA$)는 GaAs(격자상수 5.653 $\AA$)와 약 7%의 격자부정합을 가지고 잇기 때문에 GaAs 기판위에서 Stranski-Krastanov-like한 성장모드를 가지게 되고, 그로 인하여 자연적으로 양자점이 형성되게 된다. 3차원적으로 양자화된 특성을 가지는 InAs 양자점은 기저준위의 실온연속발진이 보고 되고 있으나 그 특성은 이론적으로 예측한 것과는 많이 다른 양상을 보이고 있다. 이것의 주된 원인으로는 양자점 크기 및 조성의 균일화, 그리고 양자점 크기 및 밀도의 최적호가 아직까지 이루어지고 있지 못하기 때문이다. 따라서 정밀하게 양자점을 제어하는 기술이 매우 중요하다. 이에 본 연구에서는 분자선 에피택시(MBE)방법으로 GaAs(100) 기판위에 InAs 양자점을 크기에 따라 형성시키고, 양자점의 성장 형상을 AFM으로, 그리고 분광학적 특성을 Photoluminescence로 측정하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.4
• /
• pp.285-290
• /
• 2007

A wavelength-demodulation algorithm for FBG sensor is proposed by using a double-pass Mach-Zehnder interferometer. Zero-crossing points of double-passed interference signal are used to trigger the accurate $90^{\circ}C$ phase difference positions in the sensor signal, which is an essential condition in the subsequent arctangent and phase unwrapping signal processing. With the proposed method, we could efficiently measure various measurands, such as dynamic-, static-strain, and temperature, and ${\sim}8pm$ of wavelength resolution was obtained.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.8
• /
• pp.906-912
• /
• 2012

This paper presents the new method for a six-degree-of-freedom (DOF) motion measurement and those dynamic characterizations in an ultraprecision linear stage using angle sensor-implemented grating interferometry. It consists of a diffractive optical element, a corner cube, four separate two-dimensional position sensitive detectors, four photodiodes and auxiliary optics components. From the previous study, it was confirmed that the proposed optical system could measure a six-DOF motion error in a linear stage. In this article, six-DOF motion dynamic characteristics of the stage were investigated through the step response and with respect to the conditions with a different speed of a slide table. As a result, the natural frequency and damping ratio according to a six-DOF direction was obtained. Also, it was seen that the speed of slide table had an significant effect on a six-DOF displacement motion, especially, X, which was considered as the effect of friction mechanism and local elastic mechanical deformation in a slide guide.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.11
• /
• pp.42-49
• /
• 1997

The extent of absorption and transmitance of the light that passes through some material is changed as the wavelength of the light varies, and which makdes it possible to estimate characteristics of the material. Spectrometer is a measurement system that can analyze the characteristics of material by using this principle. Its application field is so wide that it can be applied to all the arease that are concerned with analyzing materials : biological, environmental, medical and chemical area etc. This study is focused on developing precision sine drive mechanism for grating monochromator which is the most important part of the spectrometers. It is designed to be simple in struicture. It is achieved to derive basic principles to manipu- late precision sine drive mechanism : it should be aligned with a condition that .beta. , the angle between grat- ing normal and grating rod should be the same as .gamma. , the one between moving nut's normal and sliding guide. And also, it's found that the mis-alignments of the grating and mirrors are not the main factor in guaranteeing the linearity of sine drive mechanism. Performance evaluation is achieved by a standard sample by comparing experimental results with standard values. It results in wavelength accuracy of .+-. 0.5nm and resolution of 1nm. Conclusively, it can be verified that the sine drive mechanism developed in this study is not only simple in structure, but also stable and excellent in performanes.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.5 s.78
• /
• pp.511-518
• /
• 2005

The behavior of steel curved bridges is more complicated than straight bridges, thus the analysis, design and construction process of curved bridges require much more attention. In design of curved bridges, the grillage analysis using general structural analysis program or special program is mainly used. Comparative study in coherence between these analytical results and actual behavior of curved bridges has been rarely conducted. To study the behaviour of curved bridges and verify the current design method, field measurements and analyses using general structural analysis program and 3-D refined analysis program were carried out for simple and continuous bridges in this study. The study focused on the behavior of curved steel bridges during construction. Measured and analytical results had quantitative difference mutually, but there were qualitatively similar. Stress variations in transverse direction of flange were observed and grillage analysis models yielded more conservative values than 3-D refined analysis models.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.6
• /
• pp.188-197
• /
• 2022

We develop a coastal wave forecasting system by using the unstructured grid based on sea wind data of Global Data Assimilation and Prediction System. The verification is performed to examine the performance and accuracy of the wave model. Since the conventional grid has limited wave forecasting on complex coastlines and bathymetry, the unstructured grid system is applied for precise numerical simulation, and applicability for operational support is evaluated. Both grid systems show similar prediction trends in offshore and coastal areas, and the difference in prediction errors according to the grid system is not large. In addition, the applicability of the operational wave forecasting system is confirmed by dramatically reducing the model execution time of the unstructured grid under the same conditions.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.739-741
• /
• 2005

컴퓨터 게임 지리정보시스템(GIS), 가상현실 분야 등에서 환경 표현의 기반이 되는 지형 렌더링 기술은 매우 중요하다. 최근 LIDAR와 같은 3D 스캐닝 기술은 보다 정밀하고 정확한 지형 데이터를 제공한다. 하지만, 실시간 렌더링을 위해 사용되는 대부분의 방법들이 DEM이나 DTED와 같은 정규격자(uniform grid) 데이터에 최적화 되어 있기 때문에, LIDAR 데이터와 같은 비정규 데이터에는 적합하지 않다. 또한 방대한 LIDAR 데이터는 일반 PC에서 처리가 쉽지 않다. 본 논문에서는 대용량 비정규 데이터에서의 빠르고 효율적인 렌더링 방법을 제안한다. 샘플 데이터의 공간적 분포에 따라 정규격자를 생성하고, 이 격자에 맞도록 LIDAR 데이터를 재샘플링(resampling)하여 DTED와 같은 형태로 변환한다. 기하 재구성된 데이터에 연속적인 상세단계(CLOD)기반의 쿼드트리 알고리듬을 적용하여 지형을 효율적으로 렌더링한다.