• Textile Coloration and Finishing
• /
• v.22 no.3
• /
• pp.220-228
• /
• 2010

This study examines the scouring effect of pectinase on ramie fabric and influence of sodium sulfate as an activator for pectinase. The scouring effects were measured by the weight loss and pectin contents. SEM, weight loss, stiffness, moisture regain and dye ability of ramie fabric teated with pectinase/sodium sulfate were also measured. When ramie fabrics were desized with $\alpha$-amylase, the optimum conditions were pH 6.5 at $60^{\circ}C$ for 80 min with 1%(o.w.f) $\alpha$-amylase concentration. When ramie fabrics were scoured with pectinase, the optimum conditions were pH 8.5 at $55^{\circ}C$ for 30 min with 10%(o.w.f) pectinase concentration. Addition of sodium sulfate improved enzyme activity significantly, which increased proportionally with increasing sodium sulfate concentration. When 50 g/l of sodium sulfate was added, the surface became cleaner compared to the enzyme treatment without salt: weight and tensile loss, moisture regain and dyeability of the treated fabrics increased, while pectin contents and stiffness decreased. Therfore, sodium sulfate was effective activator for the pectinase treatment of flax fiber.

• Korean Journal of Materials Research
• /
• v.2 no.2
• /
• pp.157-160
• /
• 1992

Unusual surface impurity levels of PREPed Ti-51at%Al powders were analyzed using Auger spectroscopy and they were compared with these obtained from bulk starting electrode. Oxygen and carbon contents were varied very much with particle size. Powder surfaces were believed to be mainly covered by a complex compound containing Ti, Al, O, and C. The decrease in contents of oxygen and carbon of powders were attributed to the certain refining reaction of transfer type DC Ar plasma during the powder production.

• Textile Coloration and Finishing
• /
• v.21 no.6
• /
• pp.56-63
• /
• 2009

In this study we have evaluated the separation characteristics and concentration of sericin using tubular type ultrafiltration membrane in silk degumming solution that extracted from electrolytic reduction water process. Ultrafiltration membranes have used in sericin separation performance and the separation characteristics of membrane satisfied typical Hagen-Poiseuille equation. It had the increase of flux according to the increase of feed pressure and temperature in occasion of pure water flux. And also the flux and solute rejection had about $25{\sim}60{\ell}/m^2{\cdot}h$ and more than 95% in sericin feed solution with concentration 1.00~1.89% at feed pressure force of $3{\sim}8kgf/cm^2$ respectively. In addition, the separation performance of tubular type ultrafiltration membrane for silk degumming solution was very steady-state with long experiment time.

• Journal of Engineering Education Research
• /
• v.11 no.3
• /
• pp.54-62
• /
• 2008

This paper presents the process of developing, applying and increasingly updating curriculums to reinforce education in IT field through cooperation of industry and academy by the invention of government. In particular, the curriculums are developed and refined in order to satisfy both industry as users and academy as suppliers, using a spiral model, which was originally proposed for software development by Boehm. The result and the assessment are described where the developed curriculums have been applied at the universities in a national-wide base through a project by government. The basic principles of this model are general enough to be applied to curriculum development in various areas of college education.

• Journal of Korea Foundry Society
• /
• v.15 no.3
• /
• pp.235-241
• /
• 1995

In order to improve the production process of low cost and high purity Vanadium, this study was done to reduce $V_2O_5$ into V-Al master alloy by Aluminothermic Reduction, followed by refining of V-Al master alloy electron beam melting. As melting time was increased in electron beam melting of V, the contents of interstitial impurities and Al, Fe were decreased but the contents of Si, Mo and W were increased due to lower vapor pressure of these elements than that of matrix V. Consequently, it was profitable that melting of V was done for 180 seconds. In addition, with number of melting, the purity of V did not significantly vary, because volatile impurities in V were removed mostly during the first step of melting. As a result of V refining by electron beam melting, high purity Vanadium of 3N(99.91wt%) was acquired including interstitial impurities total contents of which were maximum 400ppm.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.3
• /
• pp.177-183
• /
• 2007

Active queue management (AQM) refers to a family of packet dropping mechanisms for router queues that has been proposed to support end-to-end congestion control mechanisms in the Internet. The proposed AQM algorithm by the IETF is Random Early Detection (RED). The RED algorithm allows network operators simultaneously to achieve high throughput and low average delay. However. the resulting average queue length is quite sensitive to the level of congestion. In this paper, we propose the Refined Adaptive RED(RARED), as a solution for reducing the sensitivity to parameters that affect RED performance. Based on simulations, we observe that the RARED scheme improves overall performance of the network. In particular, the RARED scheme reduces packet drop rate and improves goodput.

• Resources Recycling
• /
• v.6 no.4
• /
• pp.3-10
• /
• 1997

Electric are furnace dust (EAF dust) generated in steel production based on scrap melting is contained Zn and Fe about 25 and 30 percent by weight, respectively. From a metallurgical point of view, the dust could be regarded as a raw material for Zn and Fe source. To recover the Zn in the metal from EAF dust, many system are proposed such as Arc Plasma Furmace and Pb splasher method. In this study, to recover high purity Zn from Pb splasing alloy, Zn distillation is carried out at the temperature of 1123, 1173, 1223, 1273 K, the gas flow rate of 2.5, 5.0, 8.0 Ni/min and the distilling time of 10, 30, 60, 90 minutes. The main results obtained from this study are as follows:(1) The amount of evaporated Zn and its evaporating rate increased with increasing temperature, but purity of Zn decreased with increasing temperature. Optimum temperature range was found out to be between 1173∼1223K. (2) The amount of evaporated Zn and evaporation rate increased with increasing gas flow rate at a given temperature and distillation time. Gas flow rate has more influence over the amount of evaporated Zn and evaporation rate with increasing temperature.

• Journal of Elementary Mathematics Education in Korea
• /
• v.13 no.2
• /
• pp.141-161
• /
• 2009

Mathematical Communication ability can be more developed through sharing thoughts with others. Therefore when we instruct students in math, it is very important for teachers to provide them with opportunity to communicate mathematically. So this study provided open-ended problems in small-group collaborative learning. And we analyzed students' mathematical communication focused on the student's level of understanding. Furthermore, to improve students' mathematical communication ability, this study tries to attract the factors that we should consider the exact date for inserting the open-ended problems into a course of math and the student's level of understanding for selecting suitable open-ended problems.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.5
• /
• pp.517-523
• /
• 2003

We studied the physical properties of silk fabrics after degumming, the dyeability and the color fastness of silk fabrics after degumming and sericin fixing. As the sericin was removed from silk fabrics, the rate of weight loss increased and both the abrasion resistance and the drape coefficient decreased. This means that the amount of the sericin remained in silk fabrics significantly affects the physical properties of silk fabrics. On the surface and the cross-section of silk fabrics, the silk fibers enclosed by the sericin seemed to be in a lump shape. Each fibroin strand, however, got scattered, as the process of degumming went through. The dyeability of silk fabrics degummed decreased at between 20$^{\circ}C$∼80$^{\circ}C$ the dyeing temperature, on the other hand, it significantly increased over 80$^{\circ}C$. The dyeability of the sericin-fixed silk fabrics was lower than that of the non-serin-fixed silk fabrics, to a little extent. The colorfastness of crocking in the dyed-silk fabrics was a little low and that of the sweat was much lower in a basic sweat. Especially, the colorfastness of the partially degummed silk fabrics was low, because the sericin was not stable in the condition of sweat. Therefore, the process of sericin fixing is essentially required, for the partially degummed silk fabrics and the process of degumming itself.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2006.05a
• /
• pp.150-155
• /
• 2006

제강공정에서 발생되는 $CaO-Al_{2}O_{3}-SiO_{2}$계 조성을 갖는 2 차 정련슬래그 (래들 슬래그)를 이용하여 하수슬러지용 고화재개발 및 하수슬러지 고화체의 물성에 관한 연구를 수행하였다. 래들슬래그는 냉각과정에서 분화되는 성질이 있어 냉각후 분말상의 슬래그가 만들어진다. 분말상 슬래그의 주 결정상은 $12CaO{\cdot}7Al_{2}O_{3}$ 및 $2CaO{\cdot}SiO_{2}$로 구성되어 있다. $12CaO{\cdot}7Al_{2}O_{3}$ 상은 속경성 시멘트의 특징이 있다. 또한 $CaSO_{4}$와 혼합사용시 ettringite 상을 형성시켜 하수슬러지의 함수율 저감효과 및 강도발현 효과가 우수한 결과를 얻었다. $Cl^{-}$ 이온의 고정화면에서는 고화재중 래들슬래그의 혼합비가 높을수록 고화체 구조내에 $Cl^{-}$ 이온이 고정화되어 용출량은 감소하였다. 고화재로서 제강부산물을 사용하기 때문에 경제성이 있으며, $Cl^{-}$ 이온 함량이 높은 하수슬러지 고화재로서의 재활용이 기대된다.