• Korean Journal of Agricultural and Forest Meteorology
• /
• v.3 no.4
• /
• pp.199-205
• /
• 2001

This study was conducted to figure out temperature profiles of a partially developed paddy rice canopy, which are necessary to run plant disease forecasting models. Air temperature over and within the developing rice canopy was monitored from one month after transplanting (June 29) to just before heading (August 24) in 1999 and 2001. During the study period, the temporal march of the within-canopy profile was analyzed and an empirical formula was developed for simulating the profile. A partially developed rice canopy temperature seemed to be controlled mainly by the ambient temperature above the canopy and the water temperature beneath the canopy, and to some extent by the solar altitude, resulting in alternating isothermal and inversion structures. On sunny days, air temperature at the height of maximum leafages was increased at the same rate as the ambient temperature above the canopy after sunrise. Below the height, the temperature increase was delayed until the solar noon. Air temperature near the water surface varied much less than those of the outer- and the upper-canopy, which kept increasing by the time of daily maximum temperature observed at the nearby synoptic station. After sunset, cooling rate is much less at the lower canopy, resulting in an isothermal profile at around the midnight. A fairly consistent drop in temperature at rice paddies compared with the nearby synoptic weather stations across geographic areas and time of day was found. According to this result, a cooling by 0.6 to 1.2$^{\circ}C$ is expected over paddy rice fields compared with the officially reported temperature during the summer months. An empirical equation for simulating the temperature profile was formulated from the field observations. Given the temperature estimates at 150 cm above the canopy and the maximum deviation at the lowest layer, air temperature at any height within the canopy can be predicted by this equation. As an application, temperature surfaces at several heights within rice fields were produced over the southwestern plains in Korea at a 1 km by 1km grid spacing, where rice paddies were identified by a satellite image analysis. The outer canopy temperature was prepared by a lapse rate corrected spatial interpolation of the synoptic temperature observations combined with the hourly cooling rate over the rice paddies.

• Economic and Environmental Geology
• /
• v.48 no.6
• /
• pp.451-465
• /
• 2015

The free-air anomalies are computed using a data set from various types of gravity measurements in the Korean Peninsula area. The gravity values extracted from the Earth Gravitational Model 2008 are used in the surrounding region. The upward continuation technique suggested by Dragomir is used in the computation of the external free-air anomalies at various altitudes. The integration radius 10 times the altitude is used in order to keep the accuracy of results and computational resources. The direct geodesic formula developed by Bowring is employed in integration. At the 1-km altitude, the free-air anomalies vary from -41.315 to 189.327 mgal with the standard deviation of 22.612 mgal. At the 3-km altitude, they vary from -36.478 to 156.209 mgal with the standard deviation of 20.641 mgal. At the 1,000-km altitude, they vary from 3.170 to 5.864 mgal with the standard deviation of 0.670 mgal. The predicted free-air anomalies at 3-km altitude are compared to the published free-air anomalies reduced from the airborne gravity measurements at the same altitude. The rms difference is 3.88 mgal. Considering the reported 2.21-mgal airborne gravity cross-over accuracy, this rms difference is not serious. Possible causes in the difference appear to be external free-air anomaly simulation errors in this work and/or the gravity reduction errors of the other. The external gravity field is predicted by adding the external free-air anomaly to the normal gravity computed using the closed form formula for the gravity above and below the surface of the ellipsoid. The predicted external gravity field in this work is expected to reasonably present the real external gravity field. This work seems to be the first structured research on the external free-air anomaly in the Korean Peninsula area, and the external gravity field can be used to improve the accuracy of the inertial navigation system.

• Korean journal of communication and information
• /
• v.57
• /
• pp.33-48
• /
• 2012

Over the last decades, the issue of work or labor has played a critical role in prevailing discourses to represent the changed economic reality. Aesthetic labor, cultural work, network labor, team-work and alike, have played a dazzling role to represent the emerging economic order, employing the word of labor. Certainly, it is not less than a part of a wide range of shifts in order to make capital work with more effect by making up a workable and governable subject. In this article, I try to examine shifts around the media work which has contributed to expand the new discourse of 'labor.' I will say that it is quite crucial for accounting for the reality of media work to shed light on moves to represent media work, and, among others, one to transform the subjectivity involved in it among others. Furthermore, it would be necessary to take a close look at the subjectivity of media work and its modification to deal with and eliminate the precariousness of media work. Saying about media work without paying any attention to heterogenous and various practices to compose a media work, one is forced to regard media work as the matter of economic and legal interests. In addition, it would bring about that the cultural political concerns of media work will be detached from critical sight of the media cultural studies. Referring to major studies around media work in critical media studies, cultural studies and political economy of communication, this article will briefly look into the arrangement of contentions around subjectivity of media work in South Korea. And it will try to suggest what cultural-political strategy we need to investigate, fighting against the hegemonic power to generate and regulate media work and its workers in precarious conditions. It does not intend to search the media work and its complicated realities in detail in South Korea. I wish that it would make a preliminary step to propose and elaborate the critical analysis of media work and its form of subjectivities.

• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.141-152
• /
• 2020

The rapid on-site measurement of hydroponic nutrients allows for the more efficient use of crop fertilizers. This paper reports on the development of an embedded on-site system consisting of multiple ion-selective electrodes (ISEs) for the real-time measurement of the concentrations of macronutrients in hydroponic solutions. The system included a combination of PVC ISEs for the detection of NO₃, K, and Ca ions, a cobalt-electrode for the detection of H₂PO₄, a double-junction reference electrode, a solution container, and a sampling system consisting of pumps and valves. An Arduino Due board was used to collect data and to control the volume of the sample. Prior to the measurement of each sample, a two-point normalization method was employed to adjust the sensitivity followed by an offset to minimize potential drift that might occur during continuous measurement. The predictive capabilities of the NO₃ and K ISEs based on PVC membranes were satisfactory, producing results that were in close agreement with the results of standard analyzers (R² = 0.99). Though the Ca ISE fabricated with Ca ionophore II underestimated the Ca concentration by an average of 55%, the strong linear relationship (R² > 0.84) makes it possible for the embedded system to be used in hydroponic NO₃, K, and Ca sensing. The cobalt-rod-based phosphate electrodes exhibited a relatively high error of 24.7±9.26% in the phosphate concentration range of 45 to 155 mg/L compared to standard methods due to inconsistent signal readings between replicates, illustrating the need for further research on the signal conditioning of cobalt electrodes to improve their predictive ability in hydroponic P sensing.

• Journal of Yeungnam Medical Science
• /
• v.2 no.1
• /
• pp.211-220
• /
• 1985

Serum HBsAg, AntiHBs, HBeAg, AntiHBe and AntiHBc were detected by radioimmunoassay in 39 patients with acute viral hepatitis, 79 patients with chronic hepatitis, 30 patients with liver cirrhosis, 16 patients with primary hepatocellular carcinoma, 14 patients of HBsAg carriers and 129 cases of controls:78 cases of normal level of SGOT, SGPT, and 51 cases of elevated level of SGOT, SGPT. Following results were obtained: 1. HBsAg was detected in 66.7% of acute viral hepatitis, 63.3% of chronic hepatitis, 36.7% of liver cirrhosis, 81.3% of primary hepatocellular carcinoma and 27.1% of controls. 2. AntiHBs was positive in 0% of acute viral hepatitis, 21.5% of chronic hepatitis, 36.7% of liver cirrhosis, 31.3% of primary hepatocellular carcinoma, 0% of carrier and 44.2% of controls. 3. HBeAg was detected in 45.6% of chronic hepatitis, 23.3% of liver cirrhosis and 31.3% of primary hepatocellular carcinoma. 4. Among chronic liver diseases, antiHBe was positive in 56.3% of primary hepatocellular carcinoma, 23.3% of liver cirrhosis and 20.3% of chronic hepatitis. 5. AntiHBc was detected in most of all examines and the significance of presence of AntiHBc does not seem to represent liver disease itself but the evidence of infection of HBV. 6. Among 14 HBV carriers, 6 cases presented with abnormal SGOT, SGPT. 7. All HBV markers were negative in 5.1% of acute viral hepatitis, 5.1% of chronic hepatitis and 14.7% of controls: 17.6% of subjects with abnormal SGOT, SGPT and 12.8% of subjects with normal SGOT, SGPT. 8. Beside of HBV, other causes, such as non A, non B virus, Delta-agent, other viruses or related factors should be excluded among the patients with evidence of HBV infection associated with elevation of SGOT & SGPT.

• Investigative Magnetic Resonance Imaging
• /
• v.14 no.2
• /
• pp.103-114
• /
• 2010

Purpose : To generate a Korean specific brain template, especially in patients with Alzheimer's disease (AD) by optimizing the voxel-based analysis. Materials and Methods : Three-dimensional T1-weighted images were obtained from 123 subjects who were 43 cognitively normal subjects and patients with 44 mild cognitive impairment (MCI) and 36 AD. The template and the corresponding aprior maps were created by using the matched pairs approach with considering differences of age, gender and differential diagnosis (DDX). We measured several characteristics in both our and the MNI templates, including in the ventricle size. Also, the fractions of gray matter and white matter voxels normalized by the total intracranial were evaluated. Results : The high resolution template and the corresponding aprior maps of gray matter, white matter (WM) and CSF were created with the voxel-size of $1{\times}1{\times}1\;mm$. Mean distance measures and the ventricle sizes differed between two templates. Our brain template had less gray matter and white matter areas than the MNI template. There were volume differences more in gray matter than in white matter. Conclusion : Gray matter and/or white matter integrity studies in populations of Korean elderly and patients with AD are needed to investigate with this template.

• Sijohaknonchong
• /
• v.42
• /
• pp.29-68
• /
• 2015

This article focused on the development and current status of Sijo-chang, the Korean classical vocal genre, which is the text as a fixed form of Korean classical poems. Historically, Sijo-chang has originally emerged from Hyangga鄕歌 during Silla period (BC. 57- AD. 935). However, the current Sijo-chang has been developed from the latter of Joseon朝鮮 period(AD. 1392-1910) in 1800s. Since 1800s, Sijo-chang derived from the Gyeong-je Pyeong sijo京制 平時調, which was established in Seoul, was able to accelerate its musical types and regional characteristics among the Korean peninsula. By setting a clear division of two time periods between 1800s and those periods since 1900s to today, this article mainly explains how Sijo-chang has been developed historically. First of all, in order to appraise the musical styles and characteristics of Sijo-chang in 1800s, comparing the current musical types of Sijo-chang and those printed old score books which has its historical musical characteristics during 1800s is necessary. Secondly, this paper concentrated on the transmitted lineages of representative vocalists among the regional-based Sijo-chang from 1900s to today. During those periods, the Sijo-chang has formed its particular regional-based musical characteristics among the Korean peninsula such as Yeong-je嶺制 of Gyeongsang province慶尙道, Naepo-je內浦制 of Chungcheong province忠淸道 and Wan-je完制 of Cheolla province全羅道. Although it was not a type of regional-based Sijo-chang, as a creation with reference based on certain regional types of Sijo-chang in 1960s, this paper introduced the inheritance process of Seogam-je石菴制 which was made by Jung Gyeong-tae鄭坰兌 named Seogam石菴 as his pen name. Since Seogam-je has been singing as the most influential musical types of Sijo-chang through the mainly southern region of Korean peninsula and even in Seoul, it was highly significant to research it. In addition, this paper elaborately highlighted the developments of various Sijo-chang based on its historical performances, studies, and the composed pieces from the early 1900s or the mid-1900s. In conclusion, in order to set a vigorous development of Sijo-chang, this paper raised several concerns among the future of Sijo-Chang and the significance of its traditional value.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.3
• /
• pp.183-195
• /
• 2020

Purpose: The purpose of this study is to compare the flexural strength of CAD/CAM denture base resins with conventional denture base resins based on their thicknesses. Materials and Methods: For the conventional denture base resins, Lucitone 199^® (C-LC) was used. DIOnavi - Denture (P-DO) and DENTCA Denture Base II (P-DC) were taken for the 3D printing denture base resins. For the prepolymerized PMMA resins, Vipi Block Gum (M-VP) and M-IVoBase^® CAD (M-IV) were used. The final dimensions of the specimens were 65.0 mm x 12.7 mm x 1.6 mm / 2.0 mm / 2.5 mm. The 3-point bend test was implemented to measure the flexural strength and flexural modulus. Microscopic evaluation of surface of fractured specimen was conducted by using a scanning electron microscope (SEM). After testing the normality of the data, one-way ANOVA was adopted to evaluate the differences among sample groups with a significance level of P = 0.05. The Tukey HSD test was performed for post hoc analysis. Results: Under the same thicknesses, there are significant differences in flexural strength between CAD/CAM denture base resins and conventional denture base resins except for P-DO and C-LC. M-VP showed higher flexural strength than conventional denture base resins, P-DC and M-IV displayed lower flexural strength than conventional denture base resins. Flexural modulus was highest in M-VP, followed by C-LC, P-DO, P-DC, M-IV, significant differences were found between all materials. In the comparison of flexural strength according to thickness, flexural strength of 2.5 mm was significantly higher than that of 1.6 mm in C-LC. Flexural strength of 2.5 mm and 2.0 mm was significantly higher than that of 1.6 mm in P-DC and M-VP. In M-IV, as the thickness increases, significant increase in flexural strength appeared. SEM analysis illustrates different fracture surfaces of the specimens. Conclusion: The flexural strength of different CAD/CAM denture base resins used in this study varied according to the composition and properties of each material. The flexural strength of CAD/CAM denture base resins was higher than the standard suggested by ISO 20795-1:2013 at a thickness of 1.6 mm or more though the thickness decreased. However, for clinical use of dentures with lower thickness, further researches should be done regarding other properties at lower thickness of denture base resins.

• Korean Journal of Plant Taxonomy
• /
• v.32 no.3
• /
• pp.339-362
• /
• 2002

Pollen morphology of 13 species of Korean Euphorbia was re-examined by means of LM and SEM. Taxonomic evaluation of palynological characters and relationships among taxa were also discussed based on the analysis of polar length, equatorial diameter, aperture size and exine thickness. Korean Euphorbia species were classified into three groups based on the mean size of polar length (P) and equatorial diameter (E) as follows:Group 1. sect. Tulocarpa and Tithymalus of subgenus Esula; $(P){\times}(E)=(54.88-67.17{\mu}m){\times}(44.30-64.75{\mu}m)$, Group 2. sect. Esula and Helioscpiae of subgenus Esula; $(P){\times}(E)=(39.98-47.24{\mu}m){\times}(36.07-38.83{\mu}m)$, Group 3. sect. Chamaesyce and Hypericifoliae of subgenus Chamaesyce; $(P){\times}(E)=(30.32-32.51{\mu}m){\times}(21.71-26.23{\mu}m)$. Various features of surface sculpturing were also grouped into 8 types by the characteristics of perporation size and distance of perporations as well as connection state of it. Pollen size and surface sculpturing were comparatively available in the levels of subgenus and section. Especially subgenus Chamaesyce was distinctly different from subgenus Esula by having compactly distributed perporations on exine surface as well as its small size of pollen grains. Because of the great variations in pollen size and the occurrence of various types of surface sculpturing according to the local poulations of each species, it was evaluated that they were unsuitable in classifying each species of Euphorbia. But such cases, that is, E. hylonoma being more familiar with E. ebracteolata than E. Pallasii, and E. pekinensis and E. fauriei as well as E. pallasii being strongly related with each other based on the similarity of surface sculpturing, reflected its usefulness in the classification of some Euphorbia species.

• The Korean Journal of Archival Studies
• /
• no.25
• /
• pp.3-46
• /
• 2010

Digital records management is one whole system in which many social and technical elements are interacting. To maintain the trustworthiness, the repository needs periodical audit and certification. Thus, individual electronic records management agency needs toolkit that can be used to self-evaluate their trustworthiness continuously, and self-assess their atmosphere and system to recognize deficiencies. The purpose of this study is development of self-certification toolkit for repositories, which synthesized and analysed such four international standard and best practices as OAIS Reference Model(ISO 14721), TRAC, DRAMBORA, and the assessment report conducted and published by TNA/UKDA, as well as MoRe2 and current national laws and standards. As this paper describes and demonstrate the development process and the framework of this self-certification toolkit, other electronic records management agencies could follow the process and develop their own toolkit reflecting their situation, and utilize the self-assessment results in-house. As a result of this research, 12 areas for assessment were set, which include (organizational) operation management, classification system and master data management, acquisition, registration and description, storage and preservation, disposal, services, providing finding aids, system management, access control and security, monitoring/audit trail/statistics, and risk management. In each 12 area, the process map or functional charts were drawn and business functions were analyzed, and 54 'evaluation criteria', consisted of main business functional unit in each area were drawn. Under each 'evaluation criteria', 208 'specific evaluation criteria', which supposed to be implementable, measurable, and provable for self-evaluation in each area, were drawn. The audit and certification toolkit developed by this research could be used by digital repositories to conduct periodical self-assessment of the organization, which would be used to supplement any found deficiencies and be used to reflect the organizational development strategy.