• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2818-2827
• /
• 2015

The spatial patterns and characteristics of these sequential earthquakes and ground motions induced by the earthquakes are examined by contours of peak ground velocity (PGV) and geometric mean peak ground velocity (GMPGV) using both ordinary kriging in geographical information system (GIS) and data, the records obtained from strong motion stations, acquired after recent sequential earthquakes in Canterbury, New Zealand (NZ). The performance of underground water pipeline system is examined by using data acquired after earthquakes. The spatial distribution of GMPGV is superimposed on water pipeline repairs throughout the water distribution system in areas affected principally by transient ground motion using GIS and then water pipeline repair rates, expressed as repairs/km, for different types of pipe are evaluated relative to the estimated GMPGV outside liquefaction areas. The earthquake performance of underground water pipeline systems is summarized in this study.

• Journal of Sensor Science and Technology
• /
• v.8 no.2
• /
• pp.189-194
• /
• 1999

The heat treatment effects of the undoped ZnO and Al doped ZnO(AZO) transparent conductive films prepared by rf magnetron sputtering were investigated. The variations of the electrical and optical properties with heat treatment temperature and ambient were studied. The resistivity of the un doped ZnO films heat treated in air and $H_z$ plasma for 1 hour increased rapidly above $200^{\circ}C$ and $300^{\circ}C$, respectively. And that of the ZnO:Al films heat treated in air also increased rapidly above $300^{\circ}C$. On the other hand that of the ZnO:Al films heat treated in $H_z$ plasma was constant regardless of heat treatment temperature. The optical transmittance above 550nm is about 90% for all thin films regardless of impurity doping, the heat treatment temperature and ambient.

• Journal of Science Education
• /
• v.37 no.2
• /
• pp.348-358
• /
• 2013

The purpose of this study is to develop the science item on computer-based performance assessment which is able to replace the assessment with actual experimental apparatus. The survey on the necessities and the difficulties of the assessment with actual experimental apparatus was conducted with 57 physics teachers. By reflecting the results of the survey, the computer-based assessment items which are related with constructing circuits with an ammeter and a voltmeter were developed. The developed computer-based assessment items were organized in similarity to assessment conducted with actual experimental apparatus, proper feedback was provided by students' performance in the process of assessment so as to grading performance results automatically. To achieve them, the algorithm was developed so that computer can judge the accuracy of students' performance results.

• Journal of Life Science
• /
• v.14 no.2
• /
• pp.345-350
• /
• 2004

The present study was investigated microgeographic variations to spatial autocorrelation in the Korean alder, Alnus hirsuta. Separate counts of each type of join (combination of genotypes at a single locus) for each allele, and for each distance class of separation, were tested for significant deviation from random expectations by calculating the Standard Normal Deviation (SND). Moran's I was significantly different from the expected value in 24 of 120 cases (20.0%). 17 of these values (14.2%) were significantly negative, indicating genetic dissimilarity among pairs of individuals in the ten distance classes. Many Korean populations of alder are small and are distributed by men for firewood. This occasional cutting of seed-bearing stems may bring a high level of gene flow. In addition, stump sprouting ability also may contribute to the fact that the Chengkwang population at Gijang is unusual in lacking spatial genetic structure.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.3 no.2
• /
• pp.48-62
• /
• 1985

A method for the free network adjustment is proposed, based on the application of generalized inverse matrix (g-inverse). If the network adjustment is executed according to the solution with parameters, especially when all coordinates are considered as parameters to keep unity strength, the matrix of normal equation will be singular. This paper discusses the problem of singular matrix and the analysis of accuracy between conventional method and the free network adjustment of trilateration. In case of the adjustment, the RMS errors of adjusted X, Y coordinates are increased to 35.6% in a polygon, central-point figure, and 50.5% in a quadrilateral. In the elements of error ellipse, the RMS errors are decreased by $\pm$24.5% (a) and $\pm$5.0 % (b) in the polygon, $\pm$42.6% (a) and $\pm$49.2% (b) in the quadrilateral. Introduction of free network adjustment, therefore, could be applied to improvement of relative accuracy in the horizontal positioning.

• Geotechnical Engineering
• /
• v.5 no.4
• /
• pp.37-46
• /
• 1989

The object of this paper is to study the general characteristics of overconsolidated silty clays subjected to repeated loading. The samples are first remolded. overconsolidated and a series of strain - controlled triaxial repeated tests are carried out. Generally the relationship of deviator stress - axial strain of overconsolidated clay is similar in pattern to the normally consolidated clay under single load. But the behavior of the pore water pressure build up in the sample subjected to repeated loading is dependent upon the consolidation history and the level of repeated stress. Therefore through the series of the tests, the characteristics of stress -strain relationship of soils which are differentlly overconsolidated are investigated, analysed and then compared with each soils. And also, from the relationship of test results, the strength and strain characteristics of soils are obierved. The equilibrium lines which presents the critical repeated stress and equilibrium state in the sample under repeated loading, are often straight, but may be curved. And the tendency of the equilibrium lines is observed as to the variation of overconsolidation ratio.

• The Korean Journal of Applied Statistics
• /
• v.26 no.6
• /
• pp.1019-1032
• /
• 2013

The accurate prediction of future mortality is an important issue due to recent rapid increases in life expectancy. An accurate estimation and prediction of mortality is important to future welfare policies. The optimal selection of a mortality model is important to estimate and predict mortality; however, the period of time series data used is also an important issue. It is essential to understand that the time series data for mortality is short in Korea and the data before 1982 is incomplete. This paper divides the time series of Korean mortality into two sets to compare the parameter estimates of the LC model and LC model with a cohort effect by the period of data used. A modeling and prediction of the mortality index and cohort effect index as well as the evaluation of future life expectancy is conducted. Finally, some suggestions are proposed for the future prediction of mortality.

• Journal of Korea Technology Innovation Society
• /
• v.13 no.2
• /
• pp.365-378
• /
• 2010

For sustainable economic growth, the Korea government continues to increase its investment in R&D and at the same time, have reinforced the management of R&D outcomes and enlargement of its infrastructure for utilization. However, a strategic R&D planning that draws an outstanding outcomes is more important than the management of its post-outcomes. The purpose of this study is to propose an implication on the policy of R&D planning for obtaining a good R&D outcomes such as a high quality patent. We compared and analyzed the determinants of the patent quality in fuel cell and solar cell technology using the count data models. Estimated results showed that the determinants of the patent quality in technologies were different from each other. Therefore, having appropriate R&D planning strategies for all technologies was more effective than applying one same strategy for all because of technological differences, and based on the estimated results, we suggested the R&D planning strategy in fuel cell and solar cell technologies that could in result in high R&D outcomes.

• Journal of Korea Technology Innovation Society
• /
• v.21 no.2
• /
• pp.860-874
• /
• 2018

This study aims at empirical analysis of the new international trade theory (Melitz, 2012, 2014, 2015). The new international trade theory is centered on the effect of heterogeneous firms on the technological competitiveness on the trade effect and resulted from the important assumption that the form of the enterprise technology distribution determines the trade effect. This study empirically estimated the distribution of enterprise technology in Korean manufacturing. For the purpose of this study, we divided Korea's total enterprise technology distribution into technological innovation and technical imitation distribution, then statistically verified the distribution type and evaluated the appropriateness of the new international trade theory. Based on the empirical results of this study, we briefly suggested the direction of technology policy.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.3
• /
• pp.376-385
• /
• 1987

In this study, the plane stress fracture toughness and Tearing modulus are investigated for various crack ratios using the J integral. To evaluate the J integral and Tearing modulus, both experiments and estimation are used. The thickness of the low carbon steel specimens that is used in the experiments is 3mm. The type of specimen that is considered in the study is center-cracked-tension one. The measurements of crack length are performed by unloading compliance method. In the estimation of crack parameters such as the J integral and load line displacement, the Ramberg and Osgood stress strain law is assumed. Then simple formulas are given for estimating the crack parameters from contained yielding to fully plastic solutions. Obtained results are as follows; (1) When the crack ratio is in the range of 0.500 - 0.701, the plane stress fracture toughness is almost constant regardless of crack ratios. (2) The fracture toughness (J$\_$c/) and Tearing modulus (T) obtained are J$\_$c/=28.51kgf/mm, T=677.7 for base metal, J$\_$c/=31.85kgf/mm, T=742.0 for annealed metal. (3) Simpson's and McCabe's formulas which consider crack growth in estimating J integral are shown more conservative J and lower T than Rice's and Sumpter's. (4) Comparison of the prediction with the actual experimental measurements by Simpson's formula shows good agreement.