• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10b
• /
• pp.1263-1266
• /
• 2000

In this paper, we propose a reliable Image transmission system with Decision Feedback Equalization (DFE), and use diversity combining techniques over multipath fading channels. It is shown that the proposed system has the features of simplicity in implementation with DFE and diversity combining techniques without modifying DFE. This study includes error concealment techniques for reconstruction of missing blocks in JPEG. To verify and compare the performance of our proposed system, the computer simulations have been performed in three diversity combining cases.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.4
• /
• pp.10-16
• /
• 2011

A cabinet is an outer frame of a TV, which is usually made of poly-carbonate. Cabinets are apt to be deformed because of applied heat during injection molding process and UV joining process. Severely deformed cabinets cause a falling-off in quality of the final product. Therefore cabinets should be inspected and only the good ones should be delivered to the following process. We implemented an experimental system for shape recognition of a cabinet and proposed several indices to characterize the shape of a cabinet. We also proposed algorithms to eliminate the possible bias present in measured data and to check the goodness of a cabinet. Experimental results show the feasibility of the propose algorithms.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1518-1522
• /
• 2008

The design technology to be developed in this study is technology related to the metal panel corner processing method of very high value-added, interior and exterior cladding material, in the architecture. This study is aimed at designing a Bending Die System that enables metal panel corner processing for the first time in Korea, by improving corrosion resistance (durability), weather resistance and elegances (design) for the connecting part of right angle cornering, where most serious problems occur in using metal steel plates of 2.5mm or thicker. This is used as a kind of metal ball and as architectural interior and exterior cladding material.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.1108-1114
• /
• 2010

Nocolok brazing requires flux at the joining area and low-concentration flux is uniformly spreaded to products to be brazed in a chamber. However high-concentration flux needs to be applied only to a necessary spot. In general, high-concentration flux is manually applied for conventional brazing furnaces, resulting in low production efficiency and harmful environments for workers due to particles and heat etc. Therefore an economical and efficient automatic spreading system needs to be developed. In this study, an efficient automatic spreading system of high-concentration flux was successfully developed and tested with a NBF.

• Journal of Digital Convergence
• /
• v.15 no.5
• /
• pp.207-215
• /
• 2017

With rapid development of IT technology and biotechnology, human lifespan is extended rapidly, and we are living in the era where aging becomes the social issue. Due to this aging problem, manpower is mainly replaced by Automated Guided Vehicles (AGV) in manufacturing factories or warehouse logistics transportation. Rate of AGV use increases sharply every year. AGVs, which were used only in Smart Factories, extends its usage into indoor and outdoor operation by changing their usages to container transportation that can carry huge containers in the harbor. With the expansion of AGVs usage, the importance of RCS (Remote Control System) is also increased. In this study, we surveyed and analyzed the characteristics and technology trends of technical features of AGV's RCS that are developing in various ways to establish quality evaluation system of AGV RCS. Based on this, and by referring to international quality assessment standards, ISO/IEC 25000 series, we derived evaluation items on functional suitability and usability to secure reliability of AGV RCS. Also, it is our intention to develop evaluation model using those derived usability and reliability evaluation items.

• Korean Journal of Food Science and Technology
• /
• v.21 no.1
• /
• pp.109-119
• /
• 1989

To improve the storage method of Kimchi, optimum ripening Kimchi for an irradiation treatment(the time of around 0.3% in total acidity of Kimchi) was irradiated by doses of 1, 2, 3 kGy with Co-60 ${\gamma}-radiation$ and stored at $10^{\circ}C$. Total aerobic bacteria increased in the beginning of storage and then decrease slowly as the number of total lactic acid bacteria increased. Total lactic acid bacteria initially loaded by $10^8\;cells/ml$ in Kimchi shortly after irradiation reduced to $10^4-10^6\;cells/ml$ with 1-3 kGy doses and decreased gradually through the whole storage period. The initial load of yeast, $10^3\;cells/ml$, increased steadily during Kimchi storage and led to more than $10^4\;cells/ml$ after 30 days of storage. While it maintained tha the load in 2-3 kGy irradiated groups after 30 days of storage was less than that at the beginning of storage. pH, acidity and volatile acid in the nonirradiated group were 4.0, 0.7% and 0.06%, respectively at the 15th day after storage, but at the 30th day after storage, 2-3 kGy irradiated groups showed different values, 4.1, 0.58-0.63%, and 0.04-0.05%, respectively. The texture(firmness) of Kimchi reduced along with storage time, and 2 kGy irradiated group proved most favourable in its texture during storage. In the sensory evaluation of Kimchi, nonirradiated group was inedible after 15 days of storage, whereas 2-3 kGy irradiated groups could proling the storage-life of Kimchi over 2 times compared with the nonirradiated Kimchi, showing the good sensory quality even after 30 days of storage.

• The Korean Journal of Mycology
• /
• v.40 no.3
• /
• pp.145-151
• /
• 2012

Two strains Pleurotus eryngii KNR2312 and A8B10 (Na) which have good traits in cap quality and speedy growing were selected to breed a new strain carrying the two traits. KNR2312-2636-$10{\times}18$ (Ga) with 45.2 cap lightness and 6.5 quality was breeded by a consecutive inbreeding between KNR2312-derived monokaryons. $Ga5{\times}Na5$ came from outcrossing between Ga and Na was backcrossed with KNR2312-derived monokaryons twice to improve quality in cap color and shape. Therethrough Ga5NaKNR2312-47KNR2312-$12{\times}38$ carrying lightness of 49.5, quality of 7.3 and weight of 95.1 g was selected. The selected strain possesses good quality and dark color of cap. Especially its edge is 24 mm thick, therefore it is not likely damaged during processing and distribution.

• Horticultural Science & Technology
• /
• v.31 no.3
• /
• pp.328-336
• /
• 2013

This study was conducted to evaluate imported tomato $F_1$ cultivars as breeding materials for the resistance to Tomato yellow leaf curl virus (TYLCV) by molecular markers and bioassay. From marker genotyping and disease evaluation of 40 $F_1$ cultivars, most of the cultivars declared as TYLCV-resistance carried heterozygous marker genotype for the TYLCV resistance genes Ty-1, Ty-3, or Ty-3a, and showed low disease rates. Whereas, 4 of 5 $F_1$ cultivars declared as intermediate resistance showed marker genotype for susceptibility and disease rates ranged 18.1-33.3%. However, the xx cultivars showed inconsistency in marker genotype and disease rate. Characterization of horticultural traits of the $F_1$ cultivars with TYLCV-resistance indicated that large-size fruit cultivars were higher in yield and similar in sugar contents and solid-acid ratio compared to a control cultivar preferred in the domestic market, although hardness remained to be a problem. On the other hand, cherry tomato cultivars showed lower yield and brix, but longer internode compared to a control cultivar, indicating that breeding for TYLCV-resistance using these cultivars will require more efforts and time compared to large-sized.

• Proceedings of the KWS Conference
• /
• 1995.10a
• /
• pp.3-20
• /
• 1995

Development of Real-Time Quality Evaluation of Friction Welding by Acousitc Emission : Report 1 ABSTRACT : According as the friction welding has been increasingly applied in manufacturing various machine components because of its significant economic and technical advantages, one of the important concerns is the reliable quality monitoring method for a good weld quality with both joint strength and toughness in the process of its production. However no reliable nondestructive test method is available at present to determine the weld quality particularly in process of production. So this paper presents an experimental examination and quantitative analysis for the real-time evaluation of friction weld quality by acoustic emission, as a new approach which attempts finally to develop an on-line quality monitoring system design for friction welds using AE techniques. As one of the important results, it was confirmed, through this study, that AE techniques can be reliably applied to evaluating the friction weld qualify with 100% joint strength, as the cumulative AE counts occurring during welding period were quantitatively correlated with reliability at 95% confidence level to the joint strength of welds. Real-Time Evaluation of Automatic Production Quality Control for Friction Welding Machine : Report 2 Abstract : Both in-process quality control and high reliability of the weld is one of the major concerns in applying friction welding to the economical and qualified mass-production. No reliable nondestructive monitoring method is available at present to determine the real-time evaluation of automatic production quality control for friction welding machine. This paper, so that, presents the experimental examinations and statistical quantitative analysis of the correlation between the initial cumulative counts of acoustic emission(AE) occurring during plastic deformation period of the welding and the tensile strength of the welded joints as well as the various welding variables, as a new approach which attempts finally to develop an on-line (or real-time) quality monitoring system and a program for the process of real-time friction welding quality evaluation by initial AE cumulative counts. As one of the important results, it was well confirmed that the initial AE cumulative counts were quantitatively and cubically correlated with reliability of 95% confidence level to the joint strength of the welds, bar-to-bar (SCM4 to SUM31, SCM4 to SUM24L) and that an AE technique using initial AE counts can be reliably applied to real-time strength evaluation of the welded joints, and that such a program of the system was well developed resulting in practical possibility of real-time quality control more than 100% joint efficiency showing good weld with no micro-structural defects.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.40-40
• /
• 2010

산업현장에서는 파이프 또는 탱크류의 1GR용접에서 안정적인 이면비드를 가지는 루트패스 용접을 위해 2~3mm의 루트갭을 띄우고 용접봉 또는 필러와이어를 사용하는 TIG용접을 주로 한다. TIG용접은 고품질의 이면비드가 얻어지며, 용접인자의 제어가 쉽다는 장점이 있어 루트패스 용접에 많이 사용되고 있지만, 루트갭을 띄우면 이면비드는 잘 얻어지지만 용착금속량이 많아지게 되어 제작원가가 상승되고, 또한 소모성 와이어를 사용하는 GMAW에 비해 생산성이 낮다. 따라서, 안정적인 이면비드를 가지면서 생산성이 높은 1GR GMAW 루트패스 용접공정의 개발이 요구되지만, 이 경우도 루트갭이 2~3mm로 정해져 있으면 Fit-up공정에서 공수가 많이 필요하므로 근본적으로 루트갭이 없는 그루브에 대한 루트패스 용접이 더 바람직하다. 본 연구에서는 루트면 2.7mm를 가지는 U-그루브의 갭 없는 루트패스 용접에서 안정적인 이면비드가 형성되는 조건을 검토하기 위해 2.7t의 평판에 대하여 경사상진 각을 주고 기초 실험 후, U-그루브 맞대기 용접 실험을 진행하였다. 이 때, 경사상진 각은 용융금속이 중력으로 인해 아크 후방으로 밀리게 되고, 그로 인해 아크가 모재에 직접 닿게 되어 용입이 더 깊게되므로, 이면비드의 형성에 더 유리하다. 두께 2.7t의 연강 시편 2개를 갭 없는 I-그루브 맞대기 이음에서 Ǿ1.2 연강 솔리드 와이어를 사용하여 GMAW용접을 실시하였고, 용접전류, 용접속도, 경사상진 각, 위빙 폭, 위빙 주파수를 변경하여 각 조건에 대한 이면비드를 관찰하였다. 그 결과 경사상진 각 $25^{\circ}$, 전류 200A, 위빙폭 3mm, 위빙주파수 3Hz의 조건에서 안정적인 이면비드를 얻을 수 있었다. 또한, 현장에서 Fit-up중 발생할 수 있는 루트갭의 문제에 대하여 루트갭 1.2mm의 I-그루브 맞대기 용접에서 경사상진 각, 위빙 폭, 위빙 주파수는 갭 없이 실시한 실험에서 얻어진 가장 안정적인 결과를 사용하였고, 용접 전류, 용접 속도를 변경하여 이면비드를 관찰하였다, 그 결과 갭이 없을 때보다 약 80A 낮은 전류 조건인 120A에서 안정적인 이면비드를 얻을 수 있었다. 앞선 실험들을 기초로 하여 U-그루브 맞대기 용접을 실시 하였고, I-그루브 맞대기 용접에서 사용한 조건들과 유사한 용접 전류, 용접 속도에서 안정적인 이면비드를 얻을 수 있었다.