• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.4
• /
• pp.339-349
• /
• 2014

If the maxillomandibular relationship is unstable or requires treatment for improved function and esthetics, the first treatment objective is to provide stable occlusal contacts. The patient has moderate mental retardation. Due to inadequate vertical overjet, horizontal arch malrelation and excessive tooth loss, full mouth rehabilitation was required. The purpose of treatment planning is to establish physiologic maxillomandibular relation. Using cephalometrics for occlusal analysis is an aid to make a decision. The amount of horizontal bone reduction was calculated with evaluating soft tissue profile. After provisional denture placement, healing of the surgical site and newly adapted arch relationship was evaluated. The patient satisfied with esthetics and showed stable holding contacts. Periodic examination is needed to exclude occlusal disharmony.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.3
• /
• pp.245-248
• /
• 2020

The wettability of silicon carbide (SiC) crystal, which has 6H-SiC and 4H-SiC regions prepared using the physical vapor transport (PVT) method, is quantitatively analyzed using dispensed deionized (DI) water droplets. Regardless of the polytypes in SiC, the average of five contact angle measurements showed a difference of about 6° between the Si-face and C-face. The contact angle on the Si-face (C-face) is measured after the removal of the native oxide using BOE (6:1), and revealed a significant decrease of the contact angle from 74.9° (68.4°) to 47.7° (49.3°) and from 75.8° (70.2°) to 51.6° (49.5°) for the 4H-SiC and 6H-SiC regions, respectively. The contact angle of the Si-face recovered over time during room temperature oxidation in air; in contrast, that of the C-face did not recover to the initial value. This study shows that the contact angle is very sensitive to SiC surface polarity, specific surface conditions, and process time. Contact angle measurements are expected to be a rapid way of determining the surface polarity and wettability of SiC crystals.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.19-21
• /
• 2005

현대의 산업화 사회에서는 자동인식을 통해서 사람과 사물을 식별하고자 하는 연구들이 진행되고 있다. 그 대표적인 예로 바코드를 이용한 접촉식 판별기술이 있고, 라디오 주파수를 이용한 RFID(Radio Frequency Identification) 기술을 들 수 있다. RFID의 경우는 무선 주파수를 이용하기 때문에 대량의 사물을 동시에 인식 할 수 있다는 장점이 있다. 하지만. 어떠한 상황에서 리더의 요청에 응답을 하는 리더-태그 시스템이기 때문에 사용자의 프라이버시 침해 문제를 야기 할 수 있다. 사용자의 프라이버시 침해문제를 막기 위해서 많은 연구들이 진행되고 있다. 그 중에서, Miyako Ohkubo의 Hash체인을 이용한 프라이버시 보호 기법은 정보유출, 위치추적공격(Location Tracking Attack), 전방위보안성(Forward Security)과 같은 프라이버시 침해문제들로부터 사용자의 프라이버시를 보호 할 수 있는 프로토콜이다. 그러나 Hash함수를 태그에 구현하는 것은 현재까지는 불가능한 상황이다. 또, Martin Feldhofer의 AES(Advanced Encryption Standard)를 사용한 프로토콜은 실제로 태그에 구현 가능하면서 내부구조가 8bit인 AES를 사용함으로써 암호학적인 강도를 높였으나, 프라이버시 침해 문제에서 단점을 드러냈다. 이러한 단점을 보완한 AES기반에서의 개선된 RFID 프라이버시 보호 프로토콜은 실제적으로 태그에 구현 가능한 AES를 이용한 암호화 체인을 통해서 프라이버시 보호에 우수하면서 실제 사용이 가능한 프로토콜을 제안하였다[1]. 그러나, 이 프로토콜은 생성되는 키 값들이 물리적 공격을 통해서 노출이 되었을 때, 이전의 seed값과 키 값들이 노출 되는 단점이 있다. 본 논문에서는 이러한 문제들을 해결하고자 프라이버시보호에 새로운 키 생성 방법을 통한 강력한 프로토콜을 제안 한다.하였으나 사료효율은 증진시켰으며, 후자(사양, 사료)와의 상호작용은 나타나지 않았다. 이상의 결과는 거세비육돈에서 1) androgen과 estrogen은 공히 자발적인 사료섭취와 등지방 침적을 억제하고 IGF-I 분비를 증가시키며, 2) 성선스테로이드호르몬의 이 같은 성장에 미치는 효과의 일부는 IGF-I을 통해 매개될 수도 있을을 시사한다. 약 $70 {\~} 90\%$의 phenoxyethanol이 유상에 존재하였다. 또한, 미생물에 대한 항균력도 phenoxyethanol이 수상에 많이 존재할수록 증가하는 경향을 나타내었다. 따라서, 제형 내 oil tomposition을 변화시킴으로써 phenoxyethanol의 사용량을 줄일 수 있을 뿐만 아니라, 피부 투과를 감소시켜 보다 피부 자극이 적은 저자극 방부시스템 개발이 가능하리라 보여 진다. 첨가하여 제조한 curd yoghurt는 저장성과 관능적인 면에서 우수한 상품적 가치가 인정되는 새로운 기능성 신제품의 개발에 기여할 수 있을 것으로 사료되었다. 여자의 경우 0.8이상이 되어서 심혈관계 질환의 위험 범위에 속하는 수준이었다. 삼두근의 두겹 두께는 남녀 각각 $20.2\pm8.58cm,\;22.2\pm4.40mm$으로 남녀간에 유의한 차이는 없었다. 조사대상자의 식습관 상태는 전체 대상자의 $84.4\%$가 대부분이 하루 세끼 식사를 규칙적으로 하고 있었으며 식사속도는 허겁지겁 빨리 섭취하는 경우가 남자는 $31.0\%$, 여자는 $21.4\%$로 나타났고 이들을 제외한 나머지 사람들은 보통 속도 혹은 충분한 시간을 가지고 식사를 하였다. 평소 식사량은 조금 적게 혹은 적당하게 섭취하는 사람이 대부분이었으며 남자가 여자보다는 배부르게 먹는 경 향이 유의적으로 높았다(p<0.05). 식사는 혼자 하는 경우가 남자

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.158-158
• /
• 2017

비닐포장 하부에 위치한 콩의 생장 초기에 발생한 초엽을 인식하기 위한 연구를 수행중이다. 선행 연구에서 비닐포장에 접촉한 콩 초엽으로 인해 비닐포장 상부 표면의 열 반응 분포에 변화가 있음을 발견하였다. 현장에서 주행 중에 콩 초엽의 위치를 실시간으로 인식하고 연동된 선형 또는 회전형 엑츄에이터를 제어하여 정확한 위치에 천공을 수행하기 위해서는 계측 시스템과 제어 시스템간의 시간적 차이를 최소할 수 있는 실시간 신호 처리 기술이 필수적이다. 선행 연구에서 사용한 다중 IR 센서의 분해능은 $16{\times}4pixel$이며 주파수는 3 Hz로, 폭이 30cm 내외인 비닐포장 상부의 정밀 분석에 한계가 있음을 발견하였다. 이를 해결하기 위하여 분해능과 계측 주기를 개선할 수 있는 초소형 ($1cm{\times}1cm{\times}1cm$) 열화상 센서를 이용하였다. LWIR(Longwave infrared)영역에 해당하는 $8{\mu}m{\sim}14{\mu}m$의 영역에서 $0.05^{\circ}C$의 분해능을 보이는 $ Lepton^{TM}$ (500-0690-00, FLIR, Goleta, CA)모델을 사용하였다. 프레임당 $80{\times}60$ 픽셀의 정보가 2 Byte의 단위로 계측이 되며 9 Hz의 주파수로 대상면의 열 분포를 측정할 수 있다. 이론적으로 초당 정보 전송량은 86,400 Byte ($80{\times}60{\times}2{\times}9$)이며, 1 m를 진행하는 주행형 천공기에 적용할 경우 1 프레임당 10cm 정도의 면적을 측정하므로, 최대 위치 판정 분해능은 약 10 cm / 60 pixel = 0.17 cm/pixel로 상대적으로 정밀한 위치 판별이 가능하다. $80{\times}60{\times}2Byet$의 정보를 0.1초 이내에 분석해야 하는 기술적 과제를 해결하기 위하여 천공 작업기에 적합한 상용 SBC(Single board computer)의 클럭 속도(1 Ghz)로 처리 가능한 공간 분포 분석 알고리즘을 개발하였다. 전체 이미지 도메인을 한 번에 분석하는데 소요되는 시간을 최소화하기 위하여 공간정보 행렬을 균등히 배분하고 별도의 프로세서에서 Feature를 분석한 후 개별 프로세서의 결과를 경합식으로 판정하는 기술을 연구하였다. 오픈 소스인 MPICH(www.mpich.org) 라이브러리를 이용하여 개발한 신호 분석 프로그램을 클러스터링으로 연동된 개별 코어에 설치/수행 하였다. 2D 행렬인 열분포 정보를 공간적으로 균등 분배하여 개별 코어에서 행렬의 Spatial domain analysis를 수행하였다. $20{\times}20$의 클러스터링 단위를 이용할 경우 총 12개의 코어가 필요하였으며, 초당 10회의 연산이 가능함을 확인하였다. 병렬 클러스터링 기술을 이용하여 1m/s 내외의 주행 속도에 대응이 가능한 비닐포장 상부 열 분포 분석 시스템을 구현하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.329-331
• /
• 2018

In this paper, we propose a monitoring system that starts with the supply of raw materials for threading, is processed into a lathe machine, and checks for defects of the product are automatically performed by the robot with Smart Factory technology through assembly and disassembly. Completion check according to the production instruction quantity and production instruction is made by checking the production status according to whether or not the raw material is worn by the displacement sensor, and checking the pitch and the contour of the processed female and male to determine OK and NG. The robotic system acts as a relay for loading and unloading of raw materials, pallet transfer, and overall process, and it acts as an intermediary for organically driving. The location information of the threaded products is collected by using the non-contact wireless tag and the energy saving system Production efficiency and utilization rate were checked. The environmental sensor collects the air-conditioning environment data (temperature, humidity), measures the temperature and humidity accurately, and checks the quality of product processing. It monitors and monitors the driving hazard level environment (overheating, humidity) of the product. Controls for CNC and robot module PLC as a heterogeneous system.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.807-812
• /
• 2020

In order to prevent the national wide spread of the COVID-19 virus, the government enforces to use an electronic access registration system for public facilities to effectively track and manage the spread. Initially, there was a lot of hassle to write a directory, but recently a system for creating an electronic access list using QR codes, what is called KI-Pass, is mainly used. However, the procedure for generating a QR code is somewhat cumbersome. In this paper, we propose a new electronic access registration system that does not require QR code. This system effectively controls the suspicious visitor by using a mask wearing discriminator which has been implemented using deep learning technology, and a non-contact thermometer package. In addition, by linking the beacon, a short-range wireless communication technology, and the visitor's smartphone application, basic information of the facility visitor is automatically registered to KDCA through the server. On the other hand, the user access information registered in the server is encrypted and stored, and is automatically destroyed after up to 4 weeks. This system is expected to be very effective in preventing the spread of other new infectious diseases as well as responding to the coronavirus which is recording a high spread worldwide.

• Journal of Broadcast Engineering
• /
• v.25 no.6
• /
• pp.973-979
• /
• 2020

This study aims to objectively and quantitatively determine the social emotion of empathy by collecting pupillary response. 52 subjects (26 men and 26 women) voluntarily participated in the experiment. After the measurement of the reference of 30 seconds, the experiment was divided into the task of imitation and spontaneously self-expression. The two subjects were interacted through facial expressions, and the pupil images were recorded. The pupil data was processed through binarization and circular edge detection algorithm, and outlier detection and removal technique was used to reject eye-blinking. The pupil size according to the empathy was confirmed for statistical significance with test of normality and independent sample t-test. Statistical analysis results, the pupil size was significantly different between empathy (M ± SD = 0.050 ± 1.817)) and non-empathy (M ± SD = 1.659 ± 1.514) condition (t(92) = -4.629, p = 0.000). The rule of empathy according to the pupil size was defined through discriminant analysis, and the rule was verified (Estimation accuracy: 75%) new 12 subjects (6 men and 6 women, mean age ± SD = 22.84 ± 1.57 years). The method proposed in this study is non-contact camera technology and is expected to be utilized in various virtual reality with smart glasses.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.8
• /
• pp.381-390
• /
• 2020

This purpose of study was to influence of fitness club leader's emotional labor on job involvement and occupation performance. This study aims at providing fundamental data and information on fitness club leader's emotional labor. The survey was done through 250 copies and excluding 23 copies ran an analysis on the remaining 227(90.8%) copies. After question investigating the data which is collected used IBM SPSS statistics 21 and IBM AMOS 21 program, frequency analysis, Exploratory factor analysis and confirmatory factor analysis, convergent validity, discriminant validity, Cronbach's α, correlation analysis, path analysis through Structural Equation Model(SEM). The result of this study were as follows. First, fitness club leader's emotional labor showed (-) effects on job involvement. Second, fitness club leader's emotional labor showed (-) effect on occupation performance. Third, job involvement showed (+) effects on occupation performance. Fitness instructors have severe emotional labor. Therefore fitness instructors manage their emotional labor. This can increase job commitment and job performance. For teeth manager need to increase support options from fitness instructors.

• Korean Journal of Ichthyology
• /
• v.34 no.2
• /
• pp.73-85
• /
• 2022

The cynoglossid fishes are popular for food in the world including Korea, China and Japan, and among them, Paraplagusia japonica lives all over the sea of Korea. In order to establish appropriate management measure, it is essential to clarify population structure of P. japonica from the morphological and molecular perspectives. We collected a total of 132 individuals of P. japonica from six localities in Korea between 2008 and 2021. Canonical discriminant analysis results showed that the West Sea population (Incheon) slightly differed from the South (Tongyeong, Busan) and East Sea populations (Pohang, Donghae, Sokcho). Similar results were also shown in Kruskal-Wallis test of meristic characters. Furthermore, neighbor-joining and maximum-likelihood trees based on 849 base pairs of mitochondrial DNA cytochrome b sequences showed that P. japonica was divided into two lineages (designated as A and B) with a high significance (Φ_st=0.0781, P<0.001). Interestingly, however, the two lineages in the admixture area (South-East Sea) were not different in morphological characters. Our results suggest that P. japonica had undergone differentiated history during the Late Pleistocene, but secondary contact may occur at the admixture area.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.2
• /
• pp.151-163
• /
• 2016

The characteristics of the rock cleavage in Jurassic granite from Geochang were analysed. The evaluation for the three directions of rock cleavages was performed using the parameters such as (1) frequency of microcrack spacing(N), (2) total spacing(${\leq}1mm$), (3) mean spacing($S_{mean}$), (4) difference value($S_{mean}-S_{median}$) between mean spacing($S_{mean}$) and median spacing($S_{median}$), (5) density of spacing(${\rho}$), (6) difference value between two exponents for the whole range of the diagrams(${\lambda}_H-{\lambda}_L$), (7) mean value of exponent(${\lambda}_M$), (8) mean value of exponential constant($a_M$), (9) difference value between two exponents for the section under the initial points of intersection(${\lambda}t_H-{\lambda}t_L$), (10) mean value of exponent(${\lambda}t_M$) and (11) mean value of exponential constant($at_M$). The results of correlation analysis between the values of parameters for three rock cleavages and those for three planes are as follows. The values of (I) parameters(1, 2, 7 and 8) and (II) parameters(3, 4 and 5) are in orders of (I) H(hardway, (H1 + H2)/2) < G(grain, (G1 + G2)/2) < R(rift, (R1 + R2)/2) and (II) R < G < H. On the contrary, the values of the above two groups(I~II) of parameters for three planes show reverse orders. Besides, the values of parameter $6({\lambda}_H-{\lambda}_L)$, parameter $9({\lambda}t_H-{\lambda}t_L)$, parameter $10({\lambda}t_M)$ and parameter $11(at_M)$ for three planes are in orders of R(rift plane, (G1 + H2)/2) < H(hardway plane, (R2 + G2)/2) < G(grain plane, (R1 + H2)/2), H < G < R, H < R < G and R < H < G, respectively. The values of the above four parameters for three rock cleavages show the various orders of R < H < G, R < H < G, H < G < R and H < G < R, respectively. Meanwhile, the spacing values equivalent to the initial points of contact and intersection between the two directions of diagrams were derived. The above spacing values for three rock cleavages are in order of rift(R1 and R2) < grain(G1 and G2) < hardway(H1 and H2). The spacing values for three planes are in order of rift plane(G1 and H1) < hardway plane(R2 and G2) < grain plane(R1 and H2). In particular, the intersection angles for three rock cleavages and three planes are in order of rift and rift plane < hardway and hardway plane < grain and grain plane. Consequently, the two diagrams of rift(R1 and R2) and rift plane(G1 and H1) show higher frequency of the point of contact and intersection. These characteristics of change were derived through the general chart for three planes and three rock cleavages. Lastly, the correlation analysis through the values of parameters along with the distribution pattern is useful for discriminating three quarrying planes.